Saturn Engine Parts

ENGINE SPLASH SHIELD -- Made of high-density polyethylene for maximum durability and tensile strength; Built to exact OE dimensions for a precise fit; Backed by 1-year, unlimited-mileage warranty.

Fits the following 2004-2004 Saturn L300-3 submodels:

• 2004-2004: Base; 6 Cyl 3.0L;

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• DOHC
• Block cast number 950
• Head cast number 469
• Aluminum block
• Aluminum head

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Fits the following 1991-1992 Saturn SL2 submodels:

• 1991-1992: Base; 4 Cyl 1.9L; "GAS, FI, Naturally Aspirated, VIN 7"

A1 CARDONE ENGINE CONTROL COMPUTER, REMANUFACTURED

A1 Cardone Engine Control Computers are designed to render durable and exceptional performance, control emissions, monitor, and regulate engine performance and fuel consumption.

Features:

• 100 percent resolder of critical components
• Superior electrical connections, no intermittent failures, and longer product life
• Corrects OE design flaw and ensures chips will not lift from the board causing the unit to fail
• Defective OE conformal coating is removed from the entire ECM board including underneath chips and replaced with upgraded conformal coating

Fits the following 1991-1992 Saturn SL2 submodels:

• 1991-1992: Base; All Engines;

FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket and thermostat gasket; Includes PermaDry molded rubber oil pan gasket; Designed to be high quality direct fit replacements for stock conversion gaskets; Intended for lower block repair; Set contents may vary depending on application; With 1-year Felpro limited warranty.

Fits the following 1991-2002 Saturn SL submodels:

• 1995-2002: Base; 4 Cyl 1.9L; "GAS, FI, L24, Naturally Aspirated, VIN 8"
• 1991-1994: Base; 4 Cyl 1.9L; "GAS, FI, Naturally Aspirated, VIN 9"

AC DELCO ENGINE CONTROL MODULE, NEW -- A high quality, OE replacement engine control module; With 12-month or 12,000-mile AC Delco warranty.

Fits the following 2004-2004 Saturn L300-3 submodels:

• 2004-2004: Base; 6 Cyl 3.0L; "GAS, FI, Naturally Aspirated, VIN R"

DEA Products
DEA Products is a supplier of OEM quality chassis components and engine mounts for the automotive aftermarket.

Fits the following 2007-2007 Saturn Relay-1 submodels:

• 2007-2007: All Submodels; All Engines;

VICTOR REINZ ENGINE GASKET SET -- Conversion type; Provides optimum seal; Handles drastic temperature extremes, high internal pressures, coolants, and lubricants with unsurpassed standards of innovation and quality.

Fits the following 1991-2002 Saturn SL submodels:

• 1995-2002: Base; 4 Cyl 1.9L; "GAS, FI, L24, Naturally Aspirated, VIN 8"
• 1991-2002: All Submodels; All Engines;

• 1991-1994: Base; 4 Cyl 1.9L; "GAS, FI, Naturally Aspirated, VIN 9"

Fits 1 more submodels. (Show all) Show less info

DNJ ENGINE STANDARD REBUILD KIT -- Designed to meet or exceed OE specifications; With 12-month or 12,000-mile DNJ limited warranty.

Fits the following 1993-1998 Saturn SW1 submodels:

• 1995-1998: Base; 4 Cyl 1.9L; "VIN 8"
• 1993-1994: Base; 4 Cyl 1.9L; "VIN 9"