Dodge Charger Exhaust System

MAGNAFLOW STAINLESS STEEL CAT-BACK EXHAUST SYSTEM -- 2.5 in. Tubing O.D. Size, 4 in. Tip O.D. Size, Rear Exit Position, Single System, Includes Rolled/Slash Polished Stainless Steel Tip, Made Of 100% Tough And Durable Stainless Steel, Dyno Tested And Proven To Provide Performance Gains In Horsepower And Torque, Delivers Great Sound With A Smooth And Deep Tone, Built To Last, All Welded, Mandrel Bent, Complies With Most State And Federal Laws, Designed And Tested To Meet Legal Sound Level Limits, Easy To Install, With Magnaflow's Limited Lifetime Warranty

Fits the following 2006-2008 Dodge Charger submodels:

• 2006-2007: Base; 6 Cyl 2.7L; "Gas, FI, EER, Naturally Aspirated, VIN R"
• 2006-2007: SXT; 6 Cyl 3.5L; "GAS, FI, Naturally Aspirated, VIN G"

• 2006-2008: SE; 6 Cyl 3.5L; "GAS, FI, Naturally Aspirated, VIN G"

• 2007-2008: SE; 6 Cyl 2.7L; "Gas, FI, EER, Naturally Aspirated, VIN R"

Fits 2 more submodels. (Show all) Show less info

MAGNAFLOW CAT-BACK EXHAUST SYSTEM, STAINLESS STEEL, NATURAL FINISH -- Complies with most state and federal laws; Designed and tested to meet legal sound level limits; Increases power up to 9 h.p. and 9 lb.-ft. of torque; 2.5 in. main piping diameter, 2.5 in. tailpipe diameter; Dual rear exit; Two mufflers with single inlet and outlet configuration each; Includes polished straight-through stainless steel muffler, clamps, pipes, Tru-X resonator, and dual 4 in. polished T-304 stainless steel tips with round shape, angle cut, and rolled edge design; Made of 100 percent tough and durable stainless steel; Dyno tested and proven to provide performance gains in horsepower and torque; Delivers great sound with a smooth and deep tone; Built to last, all welded, and mandrel-bent; Easy weld-on installation; With Magnaflow's limited lifetime warranty.

Fits the following 2006-2008 Dodge Charger submodels:

• 2006-2006: Daytona R/T; 8 Cyl 5.7L; "Gas, FI, Naturally Aspirated, VIN H"
• 2006-2008: R/T; 8 Cyl 5.7L; "Gas, FI, Naturally Aspirated, VIN H"

MAGNAFLOW CAT-BACK EXHAUST SYSTEM, STAINLESS STEEL, NATURAL FINISH -- Increases horsepower on an average range of 10 percent; 2.5 in. main piping diameter, 2.25 in. tailpipe diameter; Dual rear exit; Three Single inlet and outlet muffler configuration; Includes installation hardware, gaskets, polished stainless steel mufflers, and 4 in. dual polished T-304 stainless steel tips; Made of 100 percent tough and durable stainless steel; Dyno tested and proven to provide performance gains in horsepower and torque; Delivers great sound with a smooth and deep tone; Built to last, all welded, and mandrel-bent; Complies with most state and federal laws; Designed and tested to meet legal sound level limits; Easy weld-on installation; With Magnaflow's limited lifetime warranty.

Fits the following 2006-2008 Dodge Charger submodels:

• 2006-2007: Base; 6 Cyl 2.7L; "Gas, FI, EER, Naturally Aspirated, VIN R"
• 2006-2007: SXT; 6 Cyl 3.5L; "GAS, FI, Naturally Aspirated, VIN G"

• 2006-2008: SE; 6 Cyl 3.5L; "GAS, FI, Naturally Aspirated, VIN G"

• 2007-2008: SE; 6 Cyl 2.7L; "Gas, FI, EER, Naturally Aspirated, VIN R"

Fits 2 more submodels. (Show all) Show less info

MAGNAFLOW CAT-BACK EXHAUST SYSTEM, STAINLESS STEEL, NATURAL FINISH -- Increases horsepower on an average range of 10 percent; 3 in. main piping diameter, 3 in. tailpipe diameter; Dual rear exit; Dual inlet and outlet muffler configuration; Includes installation hardware, gaskets, 5 in. x 8 in. x 18 in. polished stainless steel muffler, and 4 in. dual polished T-304 stainless steel tips; Made of 100 percent tough and durable stainless steel; Dyno tested and proven to provide performance gains in horsepower and torque; Delivers great sound with a smooth and deep tone; Built to last, all welded, and mandrel-bent; Complies with most state and federal laws; Designed and tested to meet legal sound level limits; Easy weld-on installation; With Magnaflow's limited lifetime warranty.

Fits the following 2006-2008 Dodge Charger submodels:

• 2006-2007: SRT8; 8 Cyl 6.1L; "Gas, FI, Naturally Aspirated, VIN W"
• 2008-2008: R/T; 8 Cyl 5.7L; "Gas, FI, Naturally Aspirated, VIN H"

GIBSON AMERICAN MUSCLE CAR CAT-BACK EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- 50-state street legal; 2.5 in. main piping diameter, 2.5 in. tailpipe diameter; Single rear exit; Two mufflers with single inlet and outlet muffler configuration; Includes two fully welded Superflow CFT mufflers for better volume efficiency, headpipe assembly, tailpipe assembly, zinc plated factory style hangers, heavy duty clamps, and single 4 in. high polished T-304 stainless steel tip with round shape, angle cut, and non-rolled edge design; This Exhaust System features large diameter mandrel-bent tubing; Engineered to produce maximum increase in power and provide a deep throaty exhaust tone; Easy bolt-on installation, no welding or cutting required; With Gibson's limited lifetime warranty.

Fits the following 2006-2009 Dodge Charger submodels:

• 2006-2009: SE; 6 Cyl 3.5L;
• 2006-2009: SXT; 6 Cyl 3.5L;

GIBSON AMERICAN MUSCLE CAR EXHAUST, STAINLESS -- This American Muscle Car Dual Exhaust System Features Large Diameter Mandrel Bent Tubing, Superflow CFT Performance Muffler For Better Volume Efficiency, Polished Mirror Bright Intercooled T-304 Stainless Steel Tip, Zinc Plated Factory Style Hangers And Heavy Duty Clamps, Engineered To Produce Maximum Increase In Power And Provide A Deep Throaty Exhaust Tone, Easy Bolt-On Installation, No Welding Or Cutting Required, All Mounting Hardware Included, Lifetime Limited Warranty, 50 State Emissions Legal

Fits the following 2006-2009 Dodge Charger submodels:

• 2006-2006: Daytona R/T; 8 Cyl 5.7L;
• 2006-2009: R/T; 8 Cyl 5.7L;

GIBSON AMERICAN MUSCLE CAR EXHAUST, STAINLESS -- This American Muscle Car Exhaust System Features Large Diameter Mandrel Bent Tubing, Superflow CFT Performance Muffler For Better Volume Efficiency, Polished Mirror Bright Intercooled T-304 Stainless Steel Tip, Zinc Plated Factory Style Hangers And Heavy Duty Clamps, Engineered To Produce Maximum Increase In Power And Provide A Deep Throaty Exhaust Tone, Easy Bolt-On Installation, No Welding Or Cutting Required, All Mounting Hardware Included, Lifetime Limited Warranty, 50 State Emissions Legal

Fits the following 2006-2009 Dodge Charger submodels:

• 2006-2009: SRT8; 8 Cyl 6.1L;

GIBSON AMERICAN MUSCLE CAR EXHAUST, ALUMINIZED -- This American Muscle Car Exhaust System Features Large Diameter Mandrel Bent Tubing, Superflow CFT Performance Muffler For Better Volume Efficiency, Polished Mirror Bright Intercooled T-304 Stainless Steel Tip, Zinc Plated Factory Style Hangers And Heavy Duty Clamps, Engineered To Produce Maximum Increase In Power And Provide A Deep Throaty Exhaust Tone, Easy Bolt-On Installation, No Welding Or Cutting Required, All Mounting Hardware Included, Lifetime Limited Warranty, 50 State Emissions Legal

Fits the following 2006-2009 Dodge Charger submodels:

• 2006-2009: SRT8; 8 Cyl 6.1L;

GIBSON DUAL SPORT EXHAUST, ALUMINIZED -- This Dual Cat-Back Exhaust System Is Made Of High Quality Heavy Duty Aluminized Mandrel-Bent Tubing To Maintain Constant Exhaust Flow For Outstanding Performance, Fully Welded Superflow TM Inlet Muffler For Better Volume Efficiency, T-304 High Polished Stainless Steel Clampless Slash Tips, Zinc Plated 3/8-1/2 Thick Factory Style Hangers And Heavy Duty Clamps, Designed For Hassle Free Bolt-On Installation, Provides A Powerful Aggressive Deep Exhaust Tone, Dyno Tested To Assure An Increased Of 10%-15% Horsepower And Torque Gains Of 15-20 Lb-Ft, Improves Fuel Economy As Engine Become More Fuel Efficient, Lifetime Limited Warranty Included, 50 States Emissions Legal

Fits the following 2006-2009 Dodge Charger submodels:

• 2006-2006: Daytona R/T; 8 Cyl 5.7L;
• 2006-2009: R/T; 8 Cyl 5.7L;

GIBSON AMERICAN MUSCLE CAR EXHAUST, STAINLESS -- This American Muscle Car Exhaust System Features Large Diameter Mandrel Bent Tubing, Superflow CFT Performance Muffler For Better Volume Efficiency, Polished Mirror Bright Intercooled T-304 Stainless Steel Tip, Zinc Plated Factory Style Hangers And Heavy Duty Clamps, Engineered To Produce Maximum Increase In Power And Provide A Deep Throaty Exhaust Tone, Easy Bolt-On Installation, No Welding Or Cutting Required, All Mounting Hardware Included, Lifetime Limited Warranty, 50 State Emissions Legal

Fits the following 2006-2009 Dodge Charger submodels:

• 2006-2009: SE; 6 Cyl 3.5L;
• 2006-2009: SXT; 6 Cyl 3.5L;

BORLA CAT-BACK EXHAUST SYSTEM, T-304 STAINLESS STEEL, NATURAL FINISH -- 50-state legal, C.A.R.B. certified; Increases power by 7 to 15 percent; 2.5 in. main piping diameter, 2.5 in. tailpipe diameter; Split rear exit; Four mufflers with single inlet and outlet configuration each; Includes X-pipe, mid pipes, clamps, aluminized steel mufflers, and dual 4 in. x 8 in. polished stainless steel tips with round shape, angle cut, lined, and rolled edge design; Made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent stainless steel that maintains low decibels and protects the vehicle against burnout; Dyno-proven to yield an increase in flow and power while providing better fuel economy; Insulated to reduce shell temperature for a cooler driver's compartment; Features a patented uninterrupted-flow design and multi-core technology; With longer spike for scavenging to generate maximum power; Easy bolt-on installation; With Borla's million-mile warranty.

Fits the following 2006-2008 Dodge Charger submodels:

• 2006-2008: SRT8; 8 Cyl 6.1L;

BORLA CAT-BACK EXHAUST SYSTEM -- 2.25 in. Inlet Diameter, 2.5 in. Outlet Diameter, 4.25 in. X 3.5 in. X 7 in. Single Oval Rolled Angled-Cut Tip, Split Rear Exit, Made From Aircraft-Quality, 100% T-304 Austenitic And Sound-Absorbing Mandrel-Bent Stainless Steel That Maintains Low Decibels And Protects Against Burnout, Dyno-Proven To Yield An Increase Of 7-15% In Horsepower While Providing Better Fuel Economy, Insulated To Reduce Shell Temperature For A Cooler Driver's Compartment, Increases Flow And Power, Features A Patented Uninterrupted-Flow Design And Multi-Core Technology, With Longer Spike For Scavenging To Generate Maximum Power, 50-State Emission Legal, With Borla's Million-Mile Warranty

Fits the following 2006-2008 Dodge Charger submodels:

• 2006-2008: SXT; 6 Cyl 3.5L;

BORLA CAT-BACK EXHAUST SYSTEM -- 2.5 Inlet And Outlet Diameter, 4.25 x 3.5 x 7" Single Oval Rolled Angle-Cut Tip, Rear Exit, Made From Aircraft-Quality, 100% T-304 Austenitic And Sound-Absorbing Mandrel-Bent Stainless Steel That Maintains Low Decibels And Protects Against Burnout, Dyno-Proven To Yield An Increase Of 7-15% In Horsepower While Providing Better Fuel Economy, Insulated To Reduce Shell Temperature For A Cooler Driver's Compartment, Increases Flow And Power, Features A Patented Uninterrupted-Flow Design And Multi-Core Technology, With Longer Spike For Scavenging To Generate Maximum Power, With Manufacturer's Million-Mile Warranty

Fits the following 2006-2008 Dodge Charger submodels:

• 2006-2008: SXT; 6 Cyl 3.5L;

BORLA CAT-BACK EXHAUST SYSTEM -- 2.25 in. Inlet Diameter, 2.5 in. Outlet Diameter, 4.25 in. X 3.5 in. X 7 in. Single Oval Rolled Angled-Cut Tip, Split Rear Exit, Made From Aircraft-Quality, 100% T-304 Austenitic And Sound-Absorbing Mandrel-Bent Stainless Steel That Maintains Low Decibels And Protects Against Burnout, Dyno-Proven To Yield An Increase Of 7-15% In Horsepower While Providing Better Fuel Economy, Insulated To Reduce Shell Temperature For A Cooler Driver's Compartment, Increases Flow And Power, Features A Patented Uninterrupted-Flow Design And Multi-Core Technology, With Longer Spike For Scavenging To Generate Maximum Power, 50-State Emission Legal, With Borla's Million-Mile Warranty

Fits the following 2006-2008 Dodge Charger submodels:

• 2006-2008: R/T; 8 Cyl 5.7L;

BORLA CAT-BACK EXHAUST SYSTEM, STAINLESS STEEL, NATURAL FINISH -- Increases power by 7 to 15 percent; 2.5 in. main piping diameter, 2.25 in. tailpipe diameter; Split rear exit; Two mufflers with single inlet and outlet configuration each; Includes installation hardware, gaskets, aluminized steel mufflers, and 5 in. x 12 in. dual polished stainless steel tips with round shape, angle-cut, and rolled edge design; Made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent stainless steel that maintains low decibels and protects the vehicle against burnout; Dyno-proven to yield an increase in flow and power while providing better fuel economy; Insulated to reduce shell temperature for a cooler driver's compartment; Features a patented uninterrupted-flow design and multi-core technology; With longer spike for scavenging to generate maximum power; 50-state legal, C.A.R.B. certified; Easy bolt-on installation; With Borla's million-mile warranty.

Fits the following 2006-2008 Dodge Charger submodels:

• 2006-2008: R/T; 8 Cyl 5.7L;