Jeep Exhaust System Performance

• Cat-back exhaust system
• Exit straight out the back
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Single inlet and dual outlet muffler configuration
• One muffler
• Mounting hardware included
• Dual 3.5 in. polished stainless steel with round shape, angle cut, and non-rolled edge design

• 15 to 20 h.p.
• Mandrel-bent tubing

Magnaflow Performance Series Exhaust System

Magnaflow Performance Series Exhaust system is dyno-tested and proven to make power, performance gain in horsepower and torque. This top-quality system boast great sound and has a smooth and deep tone which testifies that it gives an unparalleled performance. Protected with 100% stainless steel, Magnaflow truly gives your system the absolute defense against dust and corrosion but most importantly it provides long lasting built for your product. When you take performance seriously this system which is located after the catalytic converter truly gives you more when it comes to looks, sounds, and power.

Features and Benefits:

• Gives out a smooth and deep tone with its fully polished mufflers
• Dyno-proven mandrel-bent tubes which boost performance gains in both torque and horsepower
• Made with 100% stainless steel for maximum protection

Specifications:

• Cat-back system
• Single exit, behind the rear tire
• 2.5 in. piping diameter
• Single inlet and outlet muffler configuration
• Moderate sound level
• Single 3.5 in. polished stainless steel tip
• Mounting hardware included
• 4 x 9 x 18 in. muffler

• Includes hangers and hardware for easy installation
• Mandrel bent 16 gauge aluminized tubing
• Mild exterior exhaust tone
• Dyno tuned for maximum performance
• Made in the USA

About the Brand:

As a solution to the problem of excessive noise experienced in Californian racing events back in 1983, Flowmaster creator Ray Flugger designed and patented the first racing silencers that maintained engine power. At present, Flowmaster is still at the forefront of muffler and exhaust system technology. With its superior Research and Development arm, Flowmaster is able to manufacture high performance mufflers, exhaust systems, and accessories that produce tone and sound levels that suit the customer's preferences.

Fit Note:	4WD, USA Built Vehicle
Material:	Aluminized steel
Series:	Flowmaster Force II Kit
Exit:	Single, Straight out the back
Color/Finish:	Natural
Quantity Sold:	Assembly
Warranty:	3-year Flowmaster limited warranty

Fits the following 1991-1995 Jeep Wrangler (YJ) submodels:

• 1994-1995: SE; 6 Cyl 4.0L;
• 1991-1995: Sahara; 6 Cyl 4.0L;
• 1991-1994: Renegade; 6 Cyl 4.0L;
• 1991-1993: Base; 6 Cyl 4.0L;
• 1991-1993: Islander; 6 Cyl 4.0L;
• 1991-1991: Laredo; 6 Cyl 4.0L;
• 1991-1991: Limited; 6 Cyl 4.0L;

Fits 5 more submodels. (Show all) Show less info

Borla Performance Exhaust System

Borla Performance Exhaust System truly lives up to its name in giving unsurpassed quality when it comes to giving you the best driving satisfaction that comes from the best and most reliable exhaust system in the industry. It features with smooth mandrel bend tubes which maximizes flow and a high grade stainless steel construction that ensures great durability.

Features and Benefits:

• Built with high quality T-304 stainless steel material
• Smooth Mandrel-bent
• Improves fuel economy

Specifications:

• Cat-back system
• Dual exit, split rear
• 3 in. piping diameter
• Aggressive sound level
• Single inlet and dual outlet muffler configuration
• Dual 3.5 in. polished stainless steel tips
• Mounting hardware included
• Intercooled style tip

Dynomax Super Turbo Exhaust System

Dynomax manufactures quality performance exhaust system that is trusted for more than 70 years. Superior craftsmanship was used to develop the Dynomax Super Turbo exhaust system. Featuring the exclusive patented flow directors that efficiently channel the exhaust and minimizes turbulence while the fiberglass matting silence-out the unwanted internal resonance. All these features are wrapped with aluminized body that ensures an excellent durability and outstanding appearance. The mandrel-bent tubing provides an even exhaust flow to muffler for greater performance gain. The Dynomax Super Turbo is build to exceed your expectations and provide your vehicle the maximum performance possible.

Features and benefits:

• Mandrel-bent tubing
• Oversized internal tube
• Dyno proven to flow up to 700 SCFM
• Fiberglass matting deletes internal resonance
• Moderate sound level
• Exclusive patented flow director that channel exhaust and minimizes turbulence
• OEM hanger position and mountings
• Contains all parts needed
• Limited Lifetime Warranty

Pacesetter TFX Performance Kat-Back

Designed and manufactured with accurate skills of Pacesetter, the TFX Performance Exhaust System will deliver maximum performance and efficiency from your engine. It is constructed with mandrel bent aluminized tubing for a smooth exhaust flow and provide durability to tolerate harsh conditions. It also comes with fully-welded power mufflers that can produce more power and a powerful rumble. To finish it off, the TFX Exhaust System is crowned with mirror polished exhaust tip. The complete package of power, durability and beauty is what TFX Performance is all about.

Features and benefits:

• Crafted from 16-gauge aluminized steel
• Larger diameter mandrel-bent tubing
• Includes a performance muffler
• Excellent corrosion protection
• Includes stainless steel exhaust tips
• Uses original factory hangers for easy installation
• Includes all necessary hardware for hassle-free installation
• Backed by 3 a Year Warranty

Notes:

• Specifications:

  • Cat-back system
  • Single exit, straight out the back
  • 2.5 in. piping diameter
  • Aggressive sound level
  • Single inlet and outlet muffler configuration
  • Single 3.5 in. chrome stainless steel tip
  • Mounting hardware included

  Fit Note:	USA Built Vehicle
  Material:	Aluminized steel
  Series:	Pacesetter TFX Performance Kat-Back
  Exit:	Single, Straight out the back
  Color/Finish:	Natural
  Quantity Sold:	Assembly
  Warranty:	3-year Pacesetter limited warranty

  Fits the following 1999-2004 Jeep Grand Cherokee submodels:

  • 2004-2004: Laredo; 8 Cyl 4.7L; "GAS, FI, Naturally Aspirated, VIN J"
  • 2004-2004: Special Edition; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN S"
  • 2004-2004: Special Edition; 8 Cyl 4.7L; "GAS, FI, Naturally Aspirated, VIN N"
  • 2002-2004: Laredo; 8 Cyl 4.7L; "GAS, FI, Naturally Aspirated, VIN N"
  • 2002-2004: Limited; 8 Cyl 4.7L; "GAS, FI, Naturally Aspirated, VIN J"
  • 2002-2004: Limited; 8 Cyl 4.7L; "GAS, FI, Naturally Aspirated, VIN N"
  • 2002-2004: Overland; 8 Cyl 4.7L; "GAS, FI, Naturally Aspirated, VIN J"
  • 1999-2004: Laredo; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN S"
  • 1999-2004: Limited; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN S"
  • 2002-2002: Sport; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN S"
  • 2002-2002: Sport; 8 Cyl 4.7L; "GAS, FI, Naturally Aspirated, VIN N"

  Fits 9 more submodels. (Show all) Show less info

MBRP XP Off-Road Exhaust System

The MBRP XP Exhaust System offers a greatest added value when considering all benefits and features. This series has a T-409 stainless steel construction to stand up with the harshest road conditions. And with the

Straight-thru high flow muffler, mandrel bent tubing, and minimal bend degree angles, the MBRP XP Series gets exhaust out fast that can increase the power of your vehicle up to 18 horsepower. This system is designed to bring out the maximum output of your vehicle and bring an incredible muffler sound that you'll love.

Features and benefits:

• T-409 stainless steel to body construction
• Mandrel-bent tubing for consistent exhaust flow
• Minimal bend degree angles offers exhaust efficiency
• Seamless straight-thru muffler included
• Uses existing hanger positions and mounting
• Easy and complete bolt-on kits
• Better exhaust gas temperature
• Fuel economy improvement by 1-2 mpg
• Lifetime warranty on all XP Series

For off road use - Not legal for use on public roads and highways

Specifications:

• Cat-back system
• Single straight out the back exit
• 2.5 in. piping diameter
• Single inlet and outlet muffler configuration
• Moderate sound level
• Mounting hardware included
• Exhaust tip not included
• Tail pipe in turn down style; Requires heat shield/charcoal canister relocate kit PN 131011

Heartthrob Exhaust Car Cat-Back

The Heartthrob Exhaust Car Cat-back is an incredible system that your pocket will surely enjoy. This performance exhaust system is composed of aluminized steel that can withstand extensive use. It also features mandrel-bent tubing which lowers down the back pressure to give your car extra horsepower while the performance muffler gives an aggressive note that your ear will love. If performance gains and easy installation is what you want, Heartthrob Exhaust Car Cat-back is the one you are looking for.

Features and benefits:

• Durable 16 gauge aluminized steel construction
• Features CNC mandrel-bent tubing
• Vehicle specific fit
• Tubing diameter increased for better exhaust flow
• Muffler options of welded, turbo, glass pack or flow muffler
• Complete hardware package
• Bolt-on for easy application
• Backed with a 1-year warranty

Specifications:

• Cat-back system
• Single exit, straight out the back
• 2.5 in. piping diameter
• Single inlet and dual outlet muffler configuration
• Aggressive sound level
• Mounting hardware included

Features and Benefits:

• Comes with a High-flow muffler which gives a powerful exhaust note that answers to your vehicle's high demand for sound
• Enhances the look of your vehicle with its stainless steel polished chrome tip which won't discolor
• Aggressive muffler sound level

Specifications:

• Cat-back system
• Single behind the rear tire exit
• 2.5 in. piping diameter
• Single inlet and outlet muffler configuration
• Aggressive sound level
• Comes with single 3.5 in. polished stainless steel tip
• Mounting hardware included

Banks Monster Exhaust System

Banks guarantees performance and power whenever you use their products especially the Exhaust system. With almost 50 years of engineering airflow improvements, Banks mastered the art of maximizing flow while minimizing back pressure.

Banks Monster exhaust system increases exhaust flow for improved power, longevity, and fuel efficiency. This system is made of light but sturdy mandrel-bent stainless steel with increased tube diameter that allows significant increase in horsepower and torque. Offers a rich and throaty performance sound that is not too aggressive or noisy.

• Stainless steel
• Cat-back system
• Single exit, Straight out the back
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Aggressive sound level
• Single inlet and outlet muffler configuration
• Single 2.5 in. inlet diameter polished stainless steel exhaust tip
• Includes mounting hardware
• For maximum result, use with Banks' TorqueTube system
• Clamp-on installation
• 5-year Banks limited warranty

Advanced Flow Engineering, Inc. (aFe) is committed to manufacturing high flow, high performance products for the automotive industry. One series that will help vehicles add power and torque while improving fuel mileage is the aFe Mach Force XP Exhaust System.

Manufactured in-house to the highest engineering standards for performance and quality, the Mach Force XP Exhaust System is made from tough and durable T-409 stainless steel to resist corrosion and staining. It uses larger 100% mandrel-bent exhaust tubes for smoother exit and adjustable hangers for optimum exhaust gas flow.

Other Benefits:

• Comes with unique flow-through muffler that offers a deep, throaty rumble
• Includes premium quality band clamps on its critical joints to provide the tightest, leak-free seal
• Easy clamp-on installation

Specifications:

• Cat-back system
• Single exit, behind the rear tire
• 3 in. piping diameter
• Single inlet and outlet muffler configuration
• Aggressive sound level
• Up to 13 h.p. and 15 lbs.-ft. of torque
• Single polished stainless steel tip
• Mounting hardware included
• Up to 79 percent flow increase; For clearance with popular suspension upgrade

• Cat-back exhaust system
• Dual rear exit
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Single inlet and dual outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Dual polished stainless steel tips with round shape, angle cut, and rolled edge design

• Mandrel-bent tubing

• Bolt-on attachment style

Daily vehicle care is needed for safe or relaxing travel. Replacing malfunctioning auto parts can allow you to recover driving quality and car or truck capabilities, conserve gasoline or diesel, or prevent unexpected automotive or hardware break down. Order Omix OE Replacement Exhaust System to restore your engine/exhaust system to its perfect shape.

Specifications:

• Cat-back system
• Single straight out the back exit
• 2.25 in. piping diameter
• Single inlet and outlet muffler configuration
• Mounting hardware included
• Exhaust tip not included

Features:

Brand Info: With over 25 years of experience as a 4x4 retailer, Tom Richardson founded the Warrior Products in 1992 in order to get the heavy-duty quality he was looking for in lift shackles and hitches. Located just south of Portland, Oregon, Warrior Products has grown to build over a thousand unique parts and accessories for off-road recreational vehicles.

Notes:

• For off road use - Not legal for use on public roads and highways

  Specifications:

  • Cat-back system
  • Single straight out the back exit
  • 2.5 in. piping diameter
  • Single inlet and outlet muffler configuration
  • Heat shield and mounting hardware included

  Material:	Stainless steel
  Type:	For off road/track use
  Exit:	Single, Straight out the back
  Color/Finish:	Natural
  Quantity Sold:	Assembly
  Warranty:	Warrior Products limited warranty

  Fits the following 2007-2010 Jeep Wrangler (JK) submodels:

  • 2010-2010: Unlimited Islander; All Engines;
  • 2010-2010: Unlimited Mountain; All Engines;
  • 2010-2010: Unlimited Sport; All Engines;
  • 2007-2010: Unlimited Rubicon; All Engines;
  • 2007-2010: Unlimited Sahara; All Engines;
  • 2007-2010: Unlimited X; All Engines;

  Fits 4 more submodels. (Show all) Show less info

CROWN EXHAUST SYSTEM

A high quality, OE replacement exhaust system from Crown.

• Steel
• Turbo-back system
• Single exit, Straight out the back
• 2.25 in. main piping diameter
• Stock sound level
• Single inlet and outlet muffler configuration
• Includes pipes, muffler, catalytic converter, mounting hardware
• 0
• Clamp-on installation
• 12-month or 12,000-mile Crown limited warranty