Mazda B3000 Exhaust System

MAGNAFLOW CAT-BACK EXHAUST SYSTEM, STAINLESS STEEL, NATURAL FINISH -- Increases horsepower on an average range of 10 percent; 2.5 in. main piping diameter, 2.5 in. tailpipe diameter; Split rear exit; Single inlet and dual outlet muffler configuration; Includes installation hardware, gaskets, 5 in. x 8 in. x 18 in. polished stainless steel muffler, and 3 in. dual polished T-304 stainless steel tips; Made of 100 percent tough and durable stainless steel; Dyno tested and proven to provide performance gains in horsepower and torque; Delivers great sound with a smooth and deep tone; Built to last, all welded, and mandrel-bent; Complies with most state and federal laws; Designed and tested to meet legal sound level limits; Easy weld-on installation; With Magnaflow's limited lifetime warranty.

Fits the following 1998-2007 Mazda B3000 submodels:

• 1998-1998: SX; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN U"
• 1998-2004: SE; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN U"

• 2001-2007: DS; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN U"

• 2002-2007: Base; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN U"

Fits 2 more submodels. (Show all) Show less info

MAGNAFLOW STAINLESS STEEL CAT-BACK EXHAUST SYSTEM -- 2.5 in. Tubing O.D. Size, 3.5 in. Tip O.D. Size, Rear Side Exit Position, Single System, Includes 5 in. X 8 in. X 18 in. Muffler And Polished Stainless Steel Tip, Made Of 100% Tough And Durable Stainless Steel, Dyno Tested And Proven To Provide Performance Gains In Horsepower And Torque, Delivers Great Sound With A Smooth And Deep Tone, Built To Last, All Welded, Mandrel Bent, Complies With Most State And Federal Laws, Designed And Tested To Meet Legal Sound Level Limits, Easy To Install, Not For Use With Edge Models, With Magnaflow's Limited Lifetime Warranty

Fits the following 1998-2007 Mazda B3000 submodels:

• 1998-1998: SX; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN U"
• 1998-2004: SE; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN U"

• 2001-2007: DS; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN U"

• 2002-2007: Base; 6 Cyl 3.0L; "Gas, FI, Naturally Aspirated, VIN U"

Fits 2 more submodels. (Show all) Show less info

GIBSON SWEPT SIDE CAT-BACK EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- Gains an average power of 15 to 20 h.p. with big block powerful exhaust tone while maintaining stock sound inside the cab; 2.5 in. main piping diameter, 2.5 in. tailpipe diameter; Exits behind the rear tire; Single inlet and outlet muffler configuration; Includes fully welded Superflow TM muffler for better volume efficiency, 2.5 in. turnout pipe, 3 in. single T-304 high polished stainless steel tip with clampless and slash cut design, 2.5 in. head pipe, 2.5 in. over axle tail pipe, zinc plated 0.375-0.5 in. factory style hangers, and heavy duty clamps; Features heavy duty aluminized mandrel-bent tubing to maintain constant exhaust flow for outstanding performance; Engineered and dyno-tested to improve acceleration, maximum hill climbing, and towing and passing power; Quieter in the cab; Improves fuel economy and efficiency; Heavy duty enough for off-road use; 50-state legal, C.A.R.B. certified; Easy bolt-on installation; With Gibson's limited lifetime warranty.

Fits the following 1998-2007 Mazda B3000 submodels:

• 1998-1998: SX; 6 Cyl 3.0L;
• 1998-1999: SE; 6 Cyl 3.0L;

• 2003-2007: DS; 6 Cyl 3.0L;

• 2005-2005: Base; 6 Cyl 3.0L;

Fits 2 more submodels. (Show all) Show less info

GIBSON DUAL EXTREME CAT-BACK EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- Gains an average power of 15 to 20 h.p.; 2.5 main piping diameter; 1.75 in. tailpipe diameter; Exits behind the rear tires at an aggressive angle; Single inlet and dual outlet muffler configuration; Includes fully welded Superflow TM muffler for better volume efficiency, 3 in. dual T-304 high polished stainless steel tips with clampless and slash cut design, zinc plated 0.375-0.5 in. thick factory style hangers, and heavy-duty clamps; Heat shield not included; Features heavy duty aluminized steel mandrel-bent tubing to maintain constant exhaust flow for outstanding performance; Provides powerful exhaust tone and bold street look; Easy bolt-on installation, 50-state legal, C.A.R.B. certified; Easy bolt-on installation; With Gibson's limited lifetime warranty.

Fits the following 1998-2007 Mazda B3000 submodels:

• 1998-2004: SE; 6 Cyl 3.0L;
• 1999-1999: Troy Lee; 6 Cyl 3.0L;

• 2003-2007: DS; 6 Cyl 3.0L;

• 2005-2007: Base; 6 Cyl 3.0L;

Fits 2 more submodels. (Show all) Show less info

GIBSON SWEPT SIDE CAT-BACK EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- Gains an average power of 15 to 20 h.p. with big block powerful exhaust tone while maintaining stock sound inside the cab; 2.5 in. main piping diameter, 2.5 in. tailpipe diameter; Exits behind the rear tire; Single inlet and outlet muffler configuration; Includes fully welded Superflow TM muffler for better volume efficiency, 2.5 in. turnout pipe, 3 in. single T-304 high polished stainless steel tip with clampless and slash cut design, 2.5 in. turnout pipe, zinc plated 0.375-0.5 in. factory style hangers, and heavy duty clamps; Features heavy duty aluminized mandrel-bent tubing to maintain constant exhaust flow for outstanding performance; Engineered and dyno-tested to improve acceleration, maximum hill climbing, and towing and passing power; Quieter in the cab; Improves fuel economy and efficiency; Heavy duty enough for off-road use; 50-state legal, C.A.R.B. certified; Easy bolt-on installation; With Gibson's limited lifetime warranty.

Fits the following 1998-2007 Mazda B3000 submodels:

• 1998-2004: SE; 6 Cyl 3.0L;
• 1999-1999: Troy Lee; 6 Cyl 3.0L;

• 2003-2007: DS; 6 Cyl 3.0L;

• 2005-2007: Base; 6 Cyl 3.0L;

Fits 2 more submodels. (Show all) Show less info

GIBSON SWEPT SIDE CAT-BACK EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- Gains an average power of 15 to 20 h.p. with big block powerful exhaust tone while maintaining stock sound inside the cab; 2.5 in. main piping diameter, 2.5 in. tailpipe diameter; Exits behind the rear tire; Single inlet and outlet muffler configuration; Includes fully welded Superflow TM muffler for better volume efficiency, 3 in. single T-304 high polished stainless steel tip with clampless and slash cut design, 2.5 in. head pipe, 2.5 in. over axle tail pipe, 2.5 in. turnout pipe, zinc plated 0.375-0.5 in. factory style hangers, and heavy duty clamps; Features heavy duty aluminized mandrel-bent tubing to maintain constant exhaust flow for outstanding performance; Engineered and dyno-tested to improve acceleration, maximum hill climbing, and towing and passing power; Quieter in the cab; Improves fuel economy and efficiency; Heavy duty enough for off-road use; 50-state legal, C.A.R.B. certified; Easy bolt-on installation; With Gibson's limited lifetime warranty.

Fits the following 1995-1996 Mazda B3000 submodels:

• 1995-1996: Base; 6 Cyl 3.0L;
• 1995-1996: SE; 6 Cyl 3.0L;

GIBSON SWEPT SIDE CAT-BACK EXHAUST SYSTEM, 409L STAINLESS STEEL, NATURAL FINISH -- 50-state street legal; Gains maximum torque and horsepower up to 3000 RPM with a deep and aggressive tone; 2.5 in. main piping diameter, 2.5 in. tailpipe diameter; Exits behind rear tire; Single inlet and outlet muffler configuration; Includes fully welded Superflow TM muffler for better volume efficiency, headpipe, over axle tailpipe, turn out pipe, zinc plated 0.375-0.5 in. thick factory style hangers, heavy duty clamps, flange, and single 3 in. high polished T-304 stainless steel tip with round shape, angle cut, and non-rolled edge design; Features heavy duty 409L stainless steel mandrel-bent tubing to maintain constant exhaust flow for outstanding performance; Engineered and dyno-tested to improve acceleration, maximum hill climbing, and towing and passing power; Quieter in the cab; Improves fuel economy and efficiency; Heavy duty enough for off-road use; Easy bolt-on installation; With Gibson's limited lifetime warranty.

Fits the following 1998-2007 Mazda B3000 submodels:

• 1998-1998: SX; 6 Cyl 3.0L;
• 1998-1999: SE; 6 Cyl 3.0L;

• 2003-2007: DS; 6 Cyl 3.0L;

• 2005-2005: Base; 6 Cyl 3.0L;

Fits 2 more submodels. (Show all) Show less info

GIBSON SWEPT SIDE CAT-BACK EXHAUST SYSTEM, 409L STAINLESS STEEL, NATURAL FINISH -- Single Exit, Single Inlet/Single Outlet Muffler Configuration, This Exhaust System Features Heavy Duty 409L Stainless Steel Mandrel-Bent Tubing To Maintain Constant Exhaust Flow For Outstanding Performance, It Includes Fully Welded Superflow TM Muffler For Better Volume Efficiency, 3 in. T-304 High Polished Stainless Steel Clampless Slash Tip, 2.5 in. Stainless Headpipe, 2.5 in. Overaxle Tail Pipe And Turnout Pipe, Zinc Plated 0.375-0.5 in. Factory Style Hangers, And Heavy Duty Clamps, Engineered And Dyno-Tested To Improve Acceleration, Maximum Hill Climbing, Towing And Passing Power, Produces Maximum Torque And 15-20 hp Gains At Low-End With Deep Aggressive Tone, Exits Behind The Rear Tire Near Stock Location, Quieter In The Cab, Improves Fuel Economy And Efficiency, Heavy Duty Enough For Off-Road Use, 50-State Legal, With Gibson's Limited Lifetime Warranty

Fits the following 1998-2007 Mazda B3000 submodels:

• 1998-2004: SE; 6 Cyl 3.0L;
• 1999-1999: Troy Lee; 6 Cyl 3.0L;

• 2003-2007: DS; 6 Cyl 3.0L;

• 2005-2007: Base; 6 Cyl 3.0L;

Fits 2 more submodels. (Show all) Show less info

GIBSON DUAL SPORT CAT-BACK EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- Dual Exit, Single Inlet/Dual Outlet Muffler Configuration, This Exhaust System Features Heavy Duty Aluminized Mandrel-Bent Tubing To Maintain Constant Exhaust Flow For Outstanding Performance, It Includes Fully Welded Superflow TM Inlet Muffler For Better Volume Efficiency, 2.5 in. Headpipe, 1.75 in. Driver And Passenger Side Overaxle Tail Pipe, 3 in. T-304 High Polished Stainless Steel Clampless Slash Tips, Zinc Plated 0.375-0.5 in. Thick Factory Style Hangers And Front Muffler T-Hanger, And Heavy Duty Clamps, Designed For Hassle-Free Bolt-On Installation, Provides A Powerful Aggressive Deep Exhaust Tone, Dyno Tested To Assure An Increase Of 10-15% hp And Torque Gains Of 15-20 ft.-lbs., Exits Behind Rear Tire, Improves Fuel Economy As Engine Become More Fuel Efficient, 50-State Legal, Will Fit On 4.0L Edge, With Gibson's Limited Lifetime Warranty

Fits the following 1998-2007 Mazda B3000 submodels:

• 1998-2004: SE; 6 Cyl 3.0L;
• 1999-1999: Troy Lee; 6 Cyl 3.0L;

• 2003-2007: DS; 6 Cyl 3.0L;

• 2005-2007: Base; 6 Cyl 3.0L;

Fits 2 more submodels. (Show all) Show less info

GIBSON SPLIT REAR CAT-BACK EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- Dual Split Exit, Single Inlet/Dual Outlet Muffler Configuration, This Exhaust System Features Heavy-Duty Aluminized Steel Mandrel-Bent Tubing To Maintain Constant Exhaust Flow For Outstanding Performance, It Includes Fully Welded Superflow TM Muffler For Better Volume Efficiency, 2.5 in. Headpipe, 1.75 in. Driver And Passenger Side Overaxle Tail Pipe, 1.75 in. Exit Pipe, 3 in. T-304 High Polished Stainless Steel Clampless Slash Tips, Zinc Plated 0.375-0.5 in. Factory Style Hangers, And Heavy Duty Clamps, It Significantly Decreases Back-Pressure While Increasing Torque, The Entire System Provides An Average Gain Of 15-20 hp, Offers An Awesome Look, And Produces An Aggressive Powerful Sound, Easy Bolt-On Installation, Exit Is Straight Out The Back, Not Recommended For Towing, 50-State Legal, Will Fit On 4.0L Edge, With Gibson's Limited Lifetime Warranty

Fits the following 1998-2007 Mazda B3000 submodels:

• 1998-2004: SE; 6 Cyl 3.0L;
• 1999-1999: Troy Lee; 6 Cyl 3.0L;

• 2003-2007: DS; 6 Cyl 3.0L;

• 2005-2007: Base; 6 Cyl 3.0L;

Fits 2 more submodels. (Show all) Show less info

GIBSON SWEPT SIDE EXHAUST, ALUMINIZED -- This Swept Side Exhaust System Is Made Of High Quality Heavy Duty Aluminized Mandrel-Bent Tubing To Maintain Constant Exhaust Flow For Outstanding Performance, Fully Welded Superflow TM Muffler For Better Volume Efficiency, 2.5 Single Kit With 3 T-304 High Polished Stainless Steel Clampless Slash Tip, Zinc Plated 3/8 in. -1/2 in. Factory Style Hangers And Heavy Duty Clamps, Engineered And Dyno-Tested To Improve Acceleration, Maximum Hill Climbing, Towing And Passing Power, Produces Maximum Torque And 15-20 Horsepower Gains At Low-End With Deep Aggressive Tone, Exits Behind The Rear Tire Near Stock Location, Quieter In The Cab, Improves Fuel Economy And Efficiency, Heavy Duty Enough For Off-Road Use, Lifetime Limited Warranty, 50 State Emissions Legal

Fits the following 1995 Mazda B3000 submodels:

• 1995-1995: SE; 6 Cyl 3.0L;

GIBSON SWEPT SIDE EXHAUST, STAINLESS -- This Swept Side Exhaust System Is Made Of High Quality Heavy Duty 409L Stainless Steel Mandrel-Bent Tubing To Maintain Constant Exhaust Flow For Outstanding Performance, Fully Welded Superflow TM Muffler For Better Volume Efficiency, 2.5 Single Kit With 3 T-304 High Polished Stainless Steel Clampless Slash Tip, Zinc Plated 3/8 in. -1/2 in. Factory Style Hangers And Heavy Duty Clamps, Engineered And Dyno-Tested To Improve Acceleration, Maximum Hill Climbing, Towing And Passing Power, Produces Maximum Torque And 15-20 Horsepower Gains At Low-End With Deep Aggressive Tone, Exits Behind The Rear Tire Near Stock Location, Quieter In The Cab, Improves Fuel Economy And Efficiency, Heavy Duty Enough For Off-Road Use, Lifetime Limited Warranty, 50 State Emissions Legal

Fits the following 1995 Mazda B3000 submodels:

• 1995-1995: SE; 6 Cyl 3.0L;

GIBSON SWEPT SIDE EXHAUST, STAINLESS -- This Swept Side Exhaust System Is Made Of High Quality Heavy Duty 409L Stainless Steel Mandrel-Bent Tubing To Maintain Constant Exhaust Flow For Outstanding Performance, Fully Welded Superflow TM Muffler For Better Volume Efficiency, 2.5 Single Kit With 3 T-304 High Polished Stainless Steel Clampless Slash Tip, Zinc Plated 3/8 in. -1/2 in. Factory Style Hangers And Heavy Duty Clamps, Engineered And Dyno-Tested To Improve Acceleration, Maximum Hill Climbing, Towing And Passing Power, Produces Maximum Torque And 15-20 Horsepower Gains At Low-End With Deep Aggressive Tone, Exits Behind The Rear Tire Near Stock Location, Quieter In The Cab, Improves Fuel Economy And Efficiency, Heavy Duty Enough For Off-Road Use, Lifetime Limited Warranty, 50 State Emissions Legal

Fits the following 1995-1996 Mazda B3000 submodels:

• 1995-1996: Base; 6 Cyl 3.0L;
• 1995-1996: SE; 6 Cyl 3.0L;