Toyota Tacoma Exhaust System

GIBSON SWEPT SIDE CAT-BACK EXHAUST SYSTEM, ALUMINIZED STEEL, NATURAL FINISH -- Gains maximum torque and horsepower up to 3000 RPM with a deep and aggressive tone; 2.5 in. main piping diameter, 2.5 in. tailpipe diameter; Exits behind rear tire; Single inlet and outlet muffler configuration; Includes fully welded Superflow muffler for better volume efficiency, pipes, zinc plated 0.38-0.5 in. factory style hangers, heavy duty clamps, and single 3 in. high polished T-304 stainless steel tip with round shape, slash cut, and non-rolled edge design; Features heavy duty aluminized mandrel-bent tubing to maintain constant exhaust flow for outstanding performance; Engineered and dyno-tested to improve acceleration, maximum hill climbing, towing and passing power; Quieter in the cab; Improves fuel economy and efficiency; Heavy duty enough for off-road use; Easy bolt-on installation.

• Fit Note: 60.3 in. Bed, Crew Cab Pickup, 60.3 in. Bed, Extended Cab Pickup, 60.3 inch Bed, Crew Cab Pickup, 4WD, 60.3 inch Bed, Crew Cab Pickup, RWD, 60.3 inch Bed, Extended Cab Pickup, 4WD, 60.3 inch Bed, Extended Cab Pickup, RWD, 73.5 in. Bed, Extended Cab Pickup, 73.5 inch Bed, Extended Cab Pickup, RWD
• Material: Aluminized steel
• Series: Gibson Swept Side
• Exit: Single, Behind the rear tire
• Color/Finish: Natural
• Quantity Sold: Assembly
• Warranty: Lifetime Gibson limited warranty

Fits the following 2005-2013 Toyota Tacoma submodels:

• 2005-2013: Base; 6 Cyl 4.0L;
• 2012-2012: Pre Runner; 4 Cyl 2.7L;

• 2005-2012: Pre Runner; 6 Cyl 4.0L;
• 2005-2010: X-Runner; 6 Cyl 4.0L;

MAGNAFLOW PERFORMANCE EXHAUST SYSTEMS

Over the past 30 years, Magnaflow has grown as a market leader of exhaust systems, focusing on three key elements with each product they produce—quality, power and sound. Magnaflow’s Performance exhaust systems feature stainless steel construction and mandrel bent pipes, allowing for greater fuel economy and improved performance. A full-bodied exhaust note, emblematic of the brand, is achieved through the smooth, lap-joint welded body, tightly packed with acoustical fibers designed to dampen irritating pitch tones.

• Fit Note: 61.5 in. Bed, Crew Cab Pickup, 4WD, 61.5 in. Bed, Crew Cab Pickup, 61.5 in. Bed, Extended Cab Pickup, 4WD, 61.5 in. Bed, Extended Cab Pickup, 74.5 in. Bed, Crew Cab Pickup, 4WD, 74.5 in. Bed, Crew Cab Pickup, 74.5 in. Bed, Extended Cab Pickup, 4WD, 74.5 in. Bed, Extended Cab Pickup
• Material: Stainless steel
• Series: Magnaflow Performance
• Exit: Single, Rear (Passenger's Side)
• Color/Finish: Natural
• Quantity Sold: Assembly
• Warranty: Lifetime Magnaflow limited warranty

Fits the following 2000-2004 Toyota Tacoma submodels:

• 2004-2004: Base; 6 Cyl 3.4L;
• 2000-2004: Pre Runner; 4 Cyl 2.7L;

• 2000-2004: Pre Runner; 6 Cyl 3.4L;
• 2000-2003: DLX; 6 Cyl 3.4L;
• 2000-2000: Limited; 6 Cyl 3.4L;
• 2000-2000: SR5; 6 Cyl 3.4L;

Flowmaster American Thunder Exhaust System

Flowmaster's American Thunder exhaust system is designed with the latest technology to provide better performance. This system offers improved acceleration and passing power as well as increased fuel mileage. Engineered and dyno-tested for each application, the tubes in each kit are mandrel-bent for superior air flow and are made to deliver an aggressive exhaust tone.

Specifications:

• Cat-back system
• Dual exit, split side
• 2.5 in. piping diameter
• Single inlet and dual outlet muffler configuration
• Moderate sound level
• Dual 2.5 in. polished stainless steel tips
• Mounting hardware included
• Not fit standard cab or X-runner models

• Mandrel-bent tubing
• Includes all required mounting hardware

Note:

• Fit Note: 60.3 in. Bed, Crew Cab Pickup, 4WD, 60.3 in. Bed, Crew Cab Pickup, RWD, 60.3 in. Bed, Crew Cab Pickup, 60.3 in. Bed, Extended Cab Pickup, 4WD, 60.3 in. Bed, Extended Cab Pickup, RWD, 60.3 in. Bed, Extended Cab Pickup, 60.3 in. Bed, Standard Cab Pickup, 4WD, 60.3 in. Bed, Standard Cab Pickup, RWD, 60.3 in. Bed, Standard Cab Pickup, 60.3 in. Bed, 73.5 in. Bed, Crew Cab Pickup, 4WD, 73.5 in. Bed, Crew Cab Pickup, RWD, 73.5 in. Bed, Crew Cab Pickup, 73.5 in. Bed, Extended Cab Pickup, 4WD, 73.5 in. Bed, Extended Cab Pickup, RWD, 73.5 in. Bed, Extended Cab Pickup, 73.5 in. Bed, Standard Cab Pickup, 4WD, 73.5 in. Bed, Standard Cab Pickup, RWD, 73.5 in. Bed, Standard Cab Pickup, 73.5 in. Bed, USA Built Vehicle
• Material: Aluminized steel
• Series: Flowmaster American Thunder Kit
• Exit: Dual, Split side
• Color/Finish: Natural
• Quantity Sold: Assembly
• Warranty: 3-year Flowmaster limited warranty

Fits the following 2005-2013 Toyota Tacoma submodels:

• 2005-2013: Base; 6 Cyl 4.0L;
• 2005-2012: Pre Runner; 6 Cyl 4.0L;

• 2005-2012: X-Runner; 6 Cyl 4.0L;

Borla Performance Exhaust System

Borla Performance Exhaust System truly lives up to its name in giving unsurpassed quality when it comes to giving you the best driving satisfaction that comes from the best and most reliable exhaust system in the industry. It features with smooth mandrel bend tubes which maximizes flow and a high grade stainless steel construction that ensures great durability.

Features and Benefits:

• Built with high quality T-304 stainless steel material
• Smooth Mandrel-bent
• Improves fuel economy

Specifications:

• Cat-back system
• Single exit, behind the rear tire
• 2.25 in. piping diameter
• Aggressive sound level
• Single inlet and outlet muffler configuration
• Single 4 in. polished stainless steel tip
• Mounting hardware included

• Fit Note: 61.5 in. Bed, Extended Cab Pickup, RWD
• Material: Stainless steel
• Series: Borla Performance
• Exit: Single, Behind the rear tire
• Color/Finish: Natural
• Quantity Sold: Assembly
• Warranty: Million-mile Borla limited warranty

Fits the following 2001-2003 Toyota Tacoma submodels:

• 2001-2003: Pre Runner; 6 Cyl 3.4L;

Dynomax Ultra Flo SS Exhaust System

Leading the market with their exhaust products, Dynomax ensures that all of their components can bring out the best performance for your vehicles. This exhaust system includes a quality built muffler which is dyno-tested to flow up to 2000 SCFM and can sustain up to 1900 horsepower. The 100% welded stainless steel body can assure you a long life durability and completely polished finish. It also features a unique straight-through design for maximum exhaust flow partnered by the smooth flowing mandrel-bent tubing sums up to optimize the power potential of your vehicle. The muffler uses continuous roving fiberglass technology that delivers an aggressive, powerful, and deep performance sound that can withstand temperatures up to 1500 Fahrenheit.

Features and benefits:

• Straight-through design reduces back pressure
• Mandrel-bent tubing
• All stainless steel material
• Continuous perforated tubes for maximum sound absorption
• CRF(Continuous Roving Fiberglass) for a moderate sound level
• OEM mounting and hanger locations
• All required hardware included
• Limited Lifetime Warranty

• Fit Note: 60.3 in. Bed, Crew Cab Pickup, 60.3 in. Bed, Extended Cab Pickup, 60.3 inch Bed, Crew Cab Pickup, 4WD, 60.3 inch Bed, Crew Cab Pickup, RWD, 60.3 inch Bed, Extended Cab Pickup, 4WD, 60.3 inch Bed, Extended Cab Pickup, RWD, 73.5 in. Bed, Crew Cab Pickup, 73.5 in. Bed, Extended Cab Pickup, 73.5 inch Bed, Crew Cab Pickup, 4WD, 73.5 inch Bed, Crew Cab Pickup, RWD, 73.5 inch Bed, Extended Cab Pickup, 4WD, 73.5 inch Bed, Extended Cab Pickup, RWD
• Material: Stainless steel
• Series: Dynomax Ultra Flo SS
• Exit: Single, Behind the rear tire
• Color/Finish: Natural
• Quantity Sold: Assembly
• Warranty: Lifetime Dynomax limited warranty

Fits the following 2005-2010 Toyota Tacoma submodels:

• 2005-2010: Base; 6 Cyl 4.0L;
• 2005-2010: Pre Runner; 6 Cyl 4.0L;

• 2005-2010: X-Runner; 6 Cyl 4.0L;

MBRP Installer Exhaust System

The MBRP Installer Exhaust System is build with heavy duty aluminized steel, that's why it can easily endure moderate road conditions. The mandrel bents and the minimal bent degree angle helps the engine bring out exhaust gases faster compared to the stock exhaust system. The MBRP Installer Series is intended to give those cost conscious the same high quality design and craftsmanship as the high-end systems but at a value price.

Features and benefits:

• Heavy gauge aluminized steel construction
• Mandrel-bent tubing provides consistent exhaust stream
• Casual hand tools needed
• Complete down pipe back system
• Can boost fuel economy by 1-2 mpg
• Exhaust gas temperature improvements
• Limited 3 Year Warranty

Specifications:

• Cat-back system
• Single straight out the back exit
• 4 in. piping diameter
• Single inlet and outlet muffler configuration
• Moderate sound level
• Mounting hardware included
• Exhaust tip not included
• Tail pipe turn down style

• Fit Note: 60.3 in. Bed, Crew Cab Pickup, 60.3 in. Bed, Extended Cab Pickup
• Material: Aluminized steel
• Series: MBRP Installer
• Exit: Single, Straight out the back
• Color/Finish: Natural
• Quantity Sold: Assembly
• Warranty: 3-year MBRP limited warranty

Fits the following 2005-2011 Toyota Tacoma submodels:

• 2005-2011: Base; 4 Cyl 2.7L;
• 2005-2011: Base; 6 Cyl 4.0L;

• 2005-2011: Pre Runner; 4 Cyl 2.7L;
• 2005-2011: Pre Runner; 6 Cyl 4.0L;

JBA Performance Axle-back Exhaust System boasts to give any vehicle, power, sound, and quality, three things other competitors wish they had. JBA Performance Axle-back Exhaust system gives both great looks and performance. What's more, high flow muffler gives a powerful exhaust tone, great flow, and durability without even being overwhelming from within the vehicle. Increases horsepower and torque and improves throttle response with the help of its large diameter mandrel-bent tubing. This system is finished with a polished chromed stainless steel tip that resists discoloring that also improves the look of your vehicle. When looking for a system that effectively replaces the muffler and tips, JBA Performance Axle-back Exhaust system is the best choice.

Features and Benefits:

• Comes with a High-flow muffler which gives a powerful exhaust note that answers to your vehicle's high demand for sound
• Enhances the look of your vehicle with its stainless steel polished chrome tip which won't discolor
• Aggressive muffler sound level

Specifications:

• Cat-back system
• Single behind the rear tire exit
• 2.5 in. piping diameter
• Single inlet and outlet muffler configuration
• Aggressive sound level
• Comes with single 3.5 in. polished stainless steel tip
• Mounting hardware included

• Fit Note: Crew Cab Pickup, 4WD, Crew Cab Pickup, RWD, Extended Cab Pickup, 4WD, Extended Cab Pickup, RWD, Standard Cab Pickup, 4WD, Standard Cab Pickup, RWD
• Material: Stainless steel
• Series: JBA Performance
• Exit: Single, Behind the rear tire
• Color/Finish: Natural
• Quantity Sold: Assembly
• Warranty: 1-year JBA limited warranty

Fits the following 2005-2006 Toyota Tacoma submodels:

• 2005-2006: Base; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated"
• 2005-2006: Pre Runner; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated"

• 2005-2006: X-Runner; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated"

Banks Monster Exhaust System

Banks guarantees performance and power whenever you use their products especially the Exhaust system. With almost 50 years of engineering airflow improvements, Banks mastered the art of maximizing flow while minimizing back pressure.

Banks Monster exhaust system increases exhaust flow for improved power, longevity, and fuel efficiency. This system is made of light but sturdy mandrel-bent stainless steel with increased tube diameter that allows significant increase in horsepower and torque. Offers a rich and throaty performance sound that is not too aggressive or noisy.

• Stainless steel
• Cat-back system
• Single exit, Behind the rear tire
• 3 in. main piping diameter
• 3 in. tail pipe diameter
• Aggressive sound level
• Single inlet and outlet muffler configuration
• Single 4 in. inlet diameter polished stainless steel exhaust tip
• Includes mounting hardware
• Exhaust tip is weld-on to tail pipe
• Clamp-on installation
• 5-year Banks limited warranty

• Fit Note: Crew Cab Pickup, 4WD, Crew Cab Pickup, RWD, Extended Cab Pickup, 4WD, Extended Cab Pickup, RWD, Standard Cab Pickup, 4WD, Standard Cab Pickup, RWD
• Material: Stainless steel
• Series: Banks Monster
• Exit: Single, Behind the rear tire
• Color/Finish: Natural
• Quantity Sold: Assembly
• Warranty: 5-year Banks limited warranty

Fits the following 2005-2007 Toyota Tacoma submodels:

• 2005-2007: Base; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated"
• 2005-2007: Pre Runner; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated"

• 2005-2007: X-Runner; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated"

Advanced Flow Engineering, Inc. (aFe) is committed to manufacturing high flow, high performance products for the automotive industry. One series that will help vehicles add power and torque while improving fuel mileage is the aFe Mach Force XP Exhaust System.

Manufactured in-house to the highest engineering standards for performance and quality, the Mach Force XP Exhaust System is made from tough and durable T-409 stainless steel to resist corrosion and staining. It uses larger 100% mandrel-bent exhaust tubes for smoother exit and adjustable hangers for optimum exhaust gas flow.

Other Benefits:

• Comes with unique flow-through muffler that offers a deep, throaty rumble
• Includes premium quality band clamps on its critical joints to provide the tightest, leak-free seal
• Easy clamp-on installation

Specifications:

• Cat-back system
• Single exit, behind the rear tire
• 3 in. piping diameter
• Single inlet and outlet muffler configuration
• Aggressive sound level
• Up to 26 h.p. and 30 lbs.-ft. of torque
• Single polished stainless steel tip
• Mounting hardware included
• Up to 150 percent flow increase

• Fit Note: 73.5 in. Bed, Crew Cab Pickup
• Material: Stainless steel
• Series: AFE Machforce XP
• Exit: Single, Behind the rear tire
• Color/Finish: Natural
• Quantity Sold: Assembly
• Warranty: 2-year AFE limited warranty

Fits the following 2005-2009 Toyota Tacoma submodels:

• 2005-2009: Base; 6 Cyl 4.0L;
• 2005-2009: Pre Runner; 6 Cyl 4.0L;