Toyota Tacoma Pick Up Exhaust System

Magnaflow Performance Series Exhaust System

Magnaflow Performance Series Exhaust system is dyno-tested and proven to make power, performance gain in horsepower and torque. This top-quality system boast great sound and has a smooth and deep tone which testifies that it gives an unparalleled performance. Protected with 100% stainless steel, Magnaflow truly gives your system the absolute defense against dust and corrosion but most importantly it provides long lasting built for your product. When you take performance seriously this system which is located after the catalytic converter truly gives you more when it comes to looks, sounds, and power.

Features and Benefits:

• Gives out a smooth and deep tone with its fully polished mufflers
• Dyno-proven mandrel-bent tubes which boost performance gains in both torque and horsepower
• Made with 100% stainless steel for maximum protection

Notes:

• For off road use - Not legal for use on public roads and highways

  Specifications:

  • Cat-back system
  • Single exit, behind the rear tire
  • 2.5 in. piping diameter
  • Single inlet and outlet muffler configuration
  • Moderate sound level
  • Up to 8 h.p. and 9 lbs.-ft. of torque
  • Single 3 in. polished stainless steel tip
  • Mounting hardware included
  • 5 x 8 x 14 in. muffler

  Fit Note:	61.5 in. Bed, Crew Cab Pickup, 4WD, 61.5 in. Bed, Crew Cab Pickup, 61.5 in. Bed, Extended Cab Pickup, 4WD, 61.5 in. Bed, Extended Cab Pickup, 74.5 in. Bed, Crew Cab Pickup, 4WD, 74.5 in. Bed, Crew Cab Pickup, 74.5 in. Bed, Extended Cab Pickup, 4WD, 74.5 in. Bed, Extended Cab Pickup
  Material:	Stainless steel
  Series:	Magnaflow Performance
  Exit:	Single, Rear (Passenger's Side)
  Color/Finish:	Natural
  Quantity Sold:	Assembly
  Warranty:	Lifetime Magnaflow limited warranty

  Fits the following 2000-2004 Toyota Tacoma submodels:

  • 2004-2004: Base; 6 Cyl 3.4L;
  • 2000-2004: Pre Runner; 4 Cyl 2.7L;
  • 2000-2004: Pre Runner; 6 Cyl 3.4L;
  • 2000-2003: DLX; 6 Cyl 3.4L;
  • 2000-2000: Limited; 6 Cyl 3.4L;
  • 2000-2000: SR5; 6 Cyl 3.4L;

  Fits 4 more submodels. (Show all) Show less info

Flowmaster American Thunder Exhaust System

Flowmaster's American Thunder exhaust system is designed with the latest technology to provide better performance. This system offers improved acceleration and passing power as well as increased fuel mileage. Engineered and dyno-tested for each application, the tubes in each kit are mandrel-bent for superior air flow and are made to deliver an aggressive exhaust tone.

Specifications:

• Cat-back system
• Dual exit, split side
• 2.5 in. piping diameter
• Single inlet and dual outlet muffler configuration
• Moderate sound level
• Dual 2.5 in. polished stainless steel tips
• Mounting hardware included
• Not fit standard cab or X-runner models

• Mandrel-bent tubing
• Includes all required mounting hardware

Note:

Fits the following 2005-2013 Toyota Tacoma submodels:

• 2005-2013: Base; 6 Cyl 4.0L;
• 2005-2012: Pre Runner; 6 Cyl 4.0L;

• 2005-2012: X-Runner; 6 Cyl 4.0L;

Fits 1 more submodels. (Show all) Show less info

Borla Performance Exhaust System

Borla Performance Exhaust System truly lives up to its name in giving unsurpassed quality when it comes to giving you the best driving satisfaction that comes from the best and most reliable exhaust system in the industry. It features with smooth mandrel bend tubes which maximizes flow and a high grade stainless steel construction that ensures great durability.

Features and Benefits:

• Built with high quality T-304 stainless steel material
• Smooth Mandrel-bent
• Improves fuel economy

Specifications:

• Cat-back system
• Single exit, behind the rear tire
• 2.25 in. piping diameter
• Aggressive sound level
• Single inlet and outlet muffler configuration
• Single 4 in. polished stainless steel tip
• Mounting hardware included

Dynomax Ultra Flo SS Exhaust System

Leading the market with their exhaust products, Dynomax ensures that all of their components can bring out the best performance for your vehicles. This exhaust system includes a quality built muffler which is dyno-tested to flow up to 2000 SCFM and can sustain up to 1900 horsepower. The 100% welded stainless steel body can assure you a long life durability and completely polished finish. It also features a unique straight-through design for maximum exhaust flow partnered by the smooth flowing mandrel-bent tubing sums up to optimize the power potential of your vehicle. The muffler uses continuous roving fiberglass technology that delivers an aggressive, powerful, and deep performance sound that can withstand temperatures up to 1500 Fahrenheit.

Features and benefits:

• Straight-through design reduces back pressure
• Mandrel-bent tubing
• All stainless steel material
• Continuous perforated tubes for maximum sound absorption
• CRF(Continuous Roving Fiberglass) for a moderate sound level
• OEM mounting and hanger locations
• All required hardware included
• Limited Lifetime Warranty

MBRP XP Exhaust System

The MBRP XP Exhaust System offers a greatest added value when considering all benefits and features. This series has a T-409 stainless steel construction to stand up with the harshest road conditions. And with the

Straight-thru high flow muffler, mandrel bent tubing, and minimal bend degree angles, the MBRP XP Series gets exhaust out fast that can increase the power of your vehicle up to 18 horsepower. This system is designed to bring out the maximum output of your vehicle and bring an incredible muffler sound that you'll love.

Features and benefits:

• T-409 stainless steel to body construction
• Mandrel-bent tubing for consistent exhaust flow
• Minimal bend degree angles offers exhaust efficiency
• Seamless straight-thru muffler included
• Uses existing hanger positions and mounting
• Easy and complete bolt-on kits
• Better exhaust gas temperature
• Fuel economy improvement by 1-2 mpg
• Lifetime warranty on all XP Series

Specifications:

• Cat-back system
• Single behind the rear tire exit
• 4 in. piping diameter
• Single inlet and outlet muffler configuration
• Moderate sound level
• Comes with single polished stainless steel tips
• Mounting hardware included

Features and Benefits:

• Comes with a High-flow muffler which gives a powerful exhaust note that answers to your vehicle's high demand for sound
• Enhances the look of your vehicle with its stainless steel polished chrome tip which won't discolor
• Aggressive muffler sound level

Specifications:

• Cat-back system
• Single behind the rear tire exit
• 2.5 in. piping diameter
• Single inlet and outlet muffler configuration
• Aggressive sound level
• Comes with single 3.5 in. polished stainless steel tip
• Mounting hardware included

Banks Monster Exhaust System

Banks guarantees performance and power whenever you use their products especially the Exhaust system. With almost 50 years of engineering airflow improvements, Banks mastered the art of maximizing flow while minimizing back pressure.

Banks Monster exhaust system increases exhaust flow for improved power, longevity, and fuel efficiency. This system is made of light but sturdy mandrel-bent stainless steel with increased tube diameter that allows significant increase in horsepower and torque. Offers a rich and throaty performance sound that is not too aggressive or noisy.

• Stainless steel
• Cat-back system
• Single exit, Behind the rear tire
• 3 in. main piping diameter
• 3 in. tail pipe diameter
• Aggressive sound level
• Single inlet and outlet muffler configuration
• Single 4 in. inlet diameter polished stainless steel exhaust tip
• Includes mounting hardware
• Exhaust tip is weld-on to tail pipe
• Clamp-on installation
• 5-year Banks limited warranty

Advanced Flow Engineering, Inc. (aFe) is committed to manufacturing high flow, high performance products for the automotive industry. One series that will help vehicles add power and torque while improving fuel mileage is the aFe Mach Force XP Exhaust System.

Manufactured in-house to the highest engineering standards for performance and quality, the Mach Force XP Exhaust System is made from tough and durable T-409 stainless steel to resist corrosion and staining. It uses larger 100% mandrel-bent exhaust tubes for smoother exit and adjustable hangers for optimum exhaust gas flow.

Other Benefits:

• Comes with unique flow-through muffler that offers a deep, throaty rumble
• Includes premium quality band clamps on its critical joints to provide the tightest, leak-free seal
• Easy clamp-on installation

Specifications:

• Cat-back system
• Single exit, behind the rear tire
• 3 in. piping diameter
• Single inlet and outlet muffler configuration
• Aggressive sound level
• Up to 26 h.p. and 30 lbs.-ft. of torque
• Single polished stainless steel tip
• Mounting hardware included
• Up to 150 percent flow increase