APWPART FINDER
My Vehicle Add New
  • Select Year
  • Select Make
  • Select Model
  • Select Submodel
  • Select Engine

Shop by Brand

Nissan Xterra Flywheel

We have 3 Items In-stock. Select a year to continue.
$76.12 List Price $89.82 Save $13.70 Availability: In Stock
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
SACHS FLYWHEEL -- A high quality, direct fit OE replacement flywheel.
  • SKU#: S2NFW5301
  • Brand: Sachs
  • Fit Note: USA Built Vehicle
 
Fits the following Nissan Xterra Years:
  • 2000-2004 | 4 Cyl 2.4L | XE
  • 2000-2002 | 4 Cyl 2.4L | SE
Rating: (see review/s)

"Part is of good quality its better for an aftermarket part. I could not say anything bad about it as well as with the ordering process." posted by: jen on October 14, 2009

"It fit fine. Good deal as it did not cost much more than having my old one resurfaced. Plus I did not have to drop it off then go pick it up later." posted by: me2 on October 12, 2009

$324.57 List Price $382.99 Save $58.42 Availability: In Stock
  • APW Bestseller
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
LuK Dual Mass Flywheel

Features and Benefits:

  • The transmission is easier to shift due to the low mass to be synchronized
  • There is less synchronization wear
  • Dampens the engine's torsional vibrations and brings about the desired comfort level
  • Reduces load on the transmission at the same time

LuK understands that the job of the clutch is now more important than ever. Aside from engaging and disengaging, the clutch must effectively insulate the engine's vibrations. Thus, LuK is the first manufacturer in Europe to develop and offer a dual-mass flywheel in large-scale standard production that is able to accomplish this physical principle. Dual Mass simply means that the mass of the conventional flywheel is split in two. One part continues to belong to the engine's mass moment of inertia, while the other part now increases the mass moment of inertia of the transmission. The two decoupled masses are linked by a spring/damping system. One clutch disc, without a torsion damper, between the secondary mass and the transmission handles the engaging and disengaging functions.

  • SKU#: LUKDMF098
  • Brand: Luk
  • Warranty: 1-year or 12,000-mile LuK limited warranty
 
Fits the following Nissan Xterra Years:
  • 2011-2013 | 6 Cyl 4.0L | PRO-4X
  • 2006-2013 | 6 Cyl 4.0L | X
(see more)
$76.52 List Price $90.29 Save $13.77 Availability: In Stock
  • APW Bestseller
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
Rhinopac Flywheel

Product Highlights:

  • Bolted to the engine crankshaft and serves as the mounting-surface of the clutch assembly
  • Acts as a heat sink to dissipate heat from the pressure plate and disc.

Contact between the flywheel and disc will naturally cause hot spots, grooves, thermal cracks and/or frequent concave warpage. Therefore, the flywheel should always be replaced or resurfaced during each clutch system replacement. AMS Automotive understands that some flywheels are virtually impossible to resurface and that equipment plays an important role in the quality of the flywheel surface. AMS does not recommend the use of brake rotor lathes or small tool room lathes. Hot spots are significantly harder than the surrounding flywheel material. Brake rotor and small tool room lathes do not have the required cutting capacity to allow the cutting tool to remove hot spots in a uniform manner. Instead, a flywheel grinder or CNC lathe is used.

  • SKU#: RHI167304
  • Brand: Rhinopac
 
Fits the following Nissan Xterra Years:
  • 2000-2001 | 4 Cyl 2.4L | SE, XE