Chrysler Headers

PACESETTER HEADER, STEEL, BLACK, SOLD INDIVIDUALLY -- Product legal for sale in California under Executive Order (EO) number D-439-4. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application; 1.63 in. tube diameter, 16-gauge tube wall thickness, 2.25 in. flange collector, 0.38 in. standard head flange; Gasket, reducer, and header extension included to connect to stock system; 4-2-1, two-piece design; Round head port; Easy-to-clean; Features mandrel-bent mild steel primary tubing that is black-painted to reduce under hood temperature and to resist rust and corrosion; Significantly boosts performance and increase engine efficiency; Hook-ups for smog and engine management sensors; Pre-catalyst vehicles must use original emission control devices; It is the responsibility of the customer to reinstall these devices on the vehicle.

Fits the following 1995-1999 Chrysler Sebring submodels:

• 1996-1999: JX; All Engines;
• 1996-1999: JXi; All Engines;

• 1995-1999: LX; All Engines;

• 1995-1999: LXi; All Engines;

Fits 2 more submodels. (Show all) Show less info

GIBSON PERFORMANCE HEADERS, 409L STAINLESS STEEL, CERAMIC-COATED, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. tube diameter, 16-gauge tube wall thickness, stock flange connectors, 0.375 in. standard head flange; Premium gasket and installation hardware included; Shorty style; Round head port; These headers are direct fit bolt-on replacement for factory exhaust manifold; Made of high quality 409L stainless steel mandrel-bent tubing to maintain constant exhaust flow for outstanding performance; They feature heavy duty 0.375 in. thick laser cut port flanges and OEM style connections; They attach to OE crossover pipe; Dyno-tuned and engineered to deliver more usable horsepower and torque; These headers increase the engine's efficiency by allowing it to breathe easier and run at cooler temperature; Well suited for lowered and raised vehicles, street, and off-road; Dyno tested to perform best with Gibson's cat-back exhaust system.

Fits the following 2005-2011 Chrysler 300 submodels:

• 2005-2011: C; 8 Cyl 5.7L;
• 2010-2010: S; 8 Cyl 5.7L;

JBA CAT4WARD SHORTY HEADERS, STAINLESS STEEL, SILVER CERAMIC, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.75 in. tube diameter, 0.375 in. standard head flange; Shorty style; Round head port; They include mandrel-bent stainless steel primary tubes, patented JBA Firecone collector, factory style emission connections, extra thick collector domes, CNC laser-cut flange, and oversized exhaust ports; Made of tough and durable stainless steel; Constructed through race-proven technology for maximum horsepower and torque gains; They improve throttle response, resist warping, prevent leakage, increase flow, and accommodate cylinder head porting; Direct replacement for factory manifold, installation hardware kit included; Requires mid-pipe; Easy installation.

Fits the following 2009-2009 Chrysler 300 submodels:

• 2009-2009: C; 8 Cyl 5.7L;

HEDMAN STANDARD DUTY EXHAUST HEADERS, BLACK-PAINTED -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.75 in. tube diameter, 18-gauge tube wall thickness, 3 in. flange collector, 0.25 in. standard head flange; Premium gasket and installation hardware included; Without smog injection or injection heads; Full-length style; Round head port; They feature 18-gauge mandrel-bent primary tubes; Protected by factory applied black paint for pre-installation protection; Made in the USA; Modification to shift linkage may be needed.

Fits the following 1962-1974 Chrysler Newport submodels:

• 1973-1974: Base; 8 Cyl 6.6L;
• 1973-1974: Base; 8 Cyl 7.2L;

• 1973-1974: Custom; 8 Cyl 7.2L;

• 1972-1974: Custom; 8 Cyl 6.6L;

• 1972-1972: Custom; 8 Cyl 7.2L; "VIN T"

• 1972-1972: Royal; 8 Cyl 6.6L;

• 1972-1972: Royal; 8 Cyl 7.2L; "VIN T"

• 1971-1971: Base; 8 Cyl 7.2L; "VIN U"

• 1971-1971: Custom; 8 Cyl 7.2L; "VIN U"

• 1971-1971: Royal; 8 Cyl 6.3L;

• 1969-1971: Custom; 8 Cyl 6.3L;

• 1965-1971: Base; 8 Cyl 6.3L;

• 1962-1970: All Submodels; All Engines;

• 1969-1969: Base; 8 Cyl 7.2L; "VIN L"

• 1969-1969: Custom; 8 Cyl 7.2L; "VIN L"

Fits 13 more submodels. (Show all) Show less info

BORLA XR-1 HEADERS, STAINLESS STEEL, NATURAL FINISH, SET OF 2 -- For off road use - Not legal for use on public roads and highways; For off-road use only; 1.75 in. tube diameter, 2.5 in. flange collector; Includes pipes, clamps, gaskets, spacer, and off-road disclaimer; 4-1 design; Round head port; Made of high-grade aerospace-quality T-304 stainless steel; Every Borla header employs ultra smooth mandrel-bent tubing, all-welded construction, warp-free flanges, and special race-bred and patented technology, providing the ultimate in power and endurance; Increases flow and power; Accurate fit and easy bolt-on installation ensured and tested through the latest in engineering technology.

Fits the following 2009-2012 Chrysler 300 submodels:

• 2010-2012: S; 8 Cyl 5.7L;
• 2009-2012: C; 8 Cyl 5.7L;

BBK CNC-SERIES SHORTY HEADERS, SILVER, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.75 in. tube diameter, 16-gauge tube wall thickness, 0.375 in. standard head flange; Includes gaskets, hardware, and installation instructions; Shorty style; Round head port; Feature CNC mandrel-bent tubing for unrestrictive airflow and one-piece laser cut flange for added strength and durability; Dyno and pressure tested to ensure leak-free and maximum performance; Easy direct bolt-on installation.

Fits the following 2005-2008 Chrysler 300 submodels:

• 2005-2008: C SRT8; 8 Cyl 6.1L;
• 2005-2008: C; 8 Cyl 5.7L;