Dodge Dakota Headers

PACESETTER HEADERS, STEEL, BLACK, SET OF 2 -- Product legal for sale in California under Executive Order (EO) number D-439-5. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application; 1.5 in. tube diameter, 16-gauge tube wall thickness, 2.5 in. flange collector, 0.38 in. standard head flange; Mounting hardware, illustrated instructions, and header extension included to connect to stock system; 4-1 design; Round head port; Easy-to-clean; Features mandrel-bent mild steel primary tubing that is black-painted to reduce under hood temperature and to resist rust and corrosion; Significantly boosts performance and increase engine efficiency; Hook-ups for smog and engine management sensors; Fabrication may be required; Replaces stock exhaust manifold; Bolts to stock down pipe; Retains catalytic converter in stock location; Pre-catalyst vehicles must use original emission control devices; It is the responsibility of the customer to reinstall these devices on the vehicle.

Fits the following 1996-1996 Dodge Dakota submodels:

• 1996-1996: Base; 8 Cyl 5.2L; "GAS, FI, Naturally Aspirated, VIN Y"
• 1996-1996: SLT; 8 Cyl 5.2L; "GAS, FI, Naturally Aspirated, VIN Y"

• 1996-1996: Sport; 8 Cyl 5.2L; "GAS, FI, Naturally Aspirated, VIN Y"

• 1996-1996: WS; 8 Cyl 5.2L; "GAS, FI, Naturally Aspirated, VIN Y"

Fits 2 more submodels. (Show all) Show less info

GIBSON PERFORMANCE HEADERS, STAINLESS STEEL, NICKEL CHROME PLATED, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. tube diameter, 14-gauge tube wall thickness, stock flange connector, 0.375 in. standard head flange; Premium gasket and installation hardware included; Shorty style; Round head port; Direct fit bolt-on replacement for factory exhaust manifold; Made of nickel chrome plating heavy duty 14-gauge mandrel-bent tubing to maintain constant exhaust flow for outstanding performance; They feature heavy duty 0.375 in. thick laser cut port flanges and OEM style connections; They attach to OE crossover pipe; Dyno-tuned and engineered to deliver more usable horsepower and torque; These headers increase the engine's efficiency by allowing it to breathe easier and run at cooler temperature; Well suited for lowered and raised vehicles, street, and off-road; Dyno tested to perform best with Gibson's cat-back exhaust system.

Fits the following 2004-2006 Dodge Dakota submodels:

• 2005-2006: Laramie; 8 Cyl 4.7L;
• 2005-2006: ST; 8 Cyl 4.7L;

• 2004-2006: SLT; 8 Cyl 4.7L;

• 2004-2005: Sport; 8 Cyl 4.7L;

• 2004-2004: SLT Plus; 8 Cyl 4.7L;

• 2004-2004: Sport Plus; 8 Cyl 4.7L;

Fits 4 more submodels. (Show all) Show less info

JBA CAT4WARD SHORTY HEADERS, STAINLESS STEEL, NATURAL FINISH, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. tube diameter, 0.375 in. standard head flange; Shorty style; Round head port; They include patented Ramhorn headers, mandrel-bent stainless steel primary tubes, patented JBA Firecone collector, factory style emission connections, extra thick collector domes, CNC laser-cut flange, and oversized exhaust ports; Made of tough and durable stainless steel; Constructed through race-proven technology for maximum horsepower and torque gains; They improve throttle response, resist warping, prevent leakage, increase flow, and accommodate cylinder head porting; Requires mid-pipes; Easy installation.

Fits the following 1996-2003 Dodge Dakota submodels:

• 2000-2003: SLT; 8 Cyl 5.9L;
• 2000-2003: Sport; 8 Cyl 5.9L;

• 1998-2003: R/T; 8 Cyl 5.9L;

• 2002-2002: SXT; 8 Cyl 5.9L;

• 1996-1999: Base; 8 Cyl 5.2L;

• 1996-1999: SLT; 8 Cyl 5.2L;

• 1996-1999: Sport; 8 Cyl 5.2L;

• 1996-1996: WS; 8 Cyl 5.2L;

Fits 6 more submodels. (Show all) Show less info

HEDMAN STANDARD DUTY SHORTY HEADERS, STEEL, BLACK, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. tube diameter, 18-gauge tube wall thickness, stock flange collector, 0.25 in. standard head flange; Premium gasket and installation hardware included; 4-1 design; Round head port; They feature 18-gauge mandrel-bent primary tubes; Protected by factory applied black paint for pre-installation protection; Made in the USA; Requires Elite replacement gasket part number 27970.

Fits the following 1996-2003 Dodge Dakota submodels:

• 2000-2003: SLT; 8 Cyl 5.9L;
• 2000-2003: Sport; 8 Cyl 5.9L;

• 1998-2003: R/T; 8 Cyl 5.9L;

• 2002-2002: SXT; 8 Cyl 5.9L;

• 1997-1999: Base; 8 Cyl 5.2L;

• 1997-1999: SLT; 8 Cyl 5.2L;

• 1997-1999: Sport; 8 Cyl 5.2L;

• 1996-1996: Base; 8 Cyl 5.2L; "GAS, VIN Y"

• 1996-1996: SLT; 8 Cyl 5.2L; "GAS, VIN Y"

• 1996-1996: Sport; 8 Cyl 5.2L; "GAS, VIN Y"

• 1996-1996: WS; 8 Cyl 5.2L; "GAS, VIN Y"

Fits 9 more submodels. (Show all) Show less info

FLOWTECH I STANDARD SHORTY SMOG HEADERS, SATIN BLACK HI-TEMPERATURE PAINTED -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. Primary Tube, These Emission-Friendly Headers Offer Top Performance, Clean Machine, And Maximum Horsepower Gain Plus Increased Efficiency, They Feature Extra-Thick 0.375 in. Flanges For A Leak Free Seal, 16-Gauge Tubing For Durability, Connects To Factory Exhaust Head pipe, They Come Complete With Premium Gaskets And Hardware, Easy Bolt-On Installation To The Factory Exhaust System Which Retains All Stock Emission Equipment, Stock Replacement, Will Work With Factory Exhaust System, With Flowtech's 90-Day Warranty

Fits the following 1996-2003 Dodge Dakota submodels:

• 2000-2003: SLT; 8 Cyl 5.9L;
• 2000-2003: Sport; 8 Cyl 5.9L;

• 1998-2003: R/T; 8 Cyl 5.9L;

• 2002-2002: SXT; 8 Cyl 5.9L;

• 1997-1999: Base; 8 Cyl 5.2L;

• 1997-1999: SLT; 8 Cyl 5.2L;

• 1997-1999: Sport; 8 Cyl 5.2L;

• 1996-1996: Base; 8 Cyl 5.2L; "GAS, VIN Y"

• 1996-1996: SLT; 8 Cyl 5.2L; "GAS, VIN Y"

• 1996-1996: Sport; 8 Cyl 5.2L; "GAS, VIN Y"

• 1996-1996: WS; 8 Cyl 5.2L; "GAS, VIN Y"

Fits 9 more submodels. (Show all) Show less info