Ford Headers Performance

PACESETTER HEADERS, STEEL, BLACK, SET OF 2 -- Product legal for sale in California under Executive Order (EO) number D-439-5. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application; 1.5 in. tube diameter, 16-gauge tube wall thickness, 2.5 in. flange collector, 0.38 in. standard head flange; Mounting hardware, illustrated instructions, and header extension included to connect to stock system; 4-1 design; Round head port; Easy-to-clean; Features mandrel-bent mild steel primary tubing that is black-painted to reduce under hood temperature and to resist rust and corrosion; Significantly boosts performance and increase engine efficiency; Hook-ups for smog and engine management sensors; Fabrication may be required; Replaces stock exhaust manifold; Bolts to stock down pipe; Retains catalytic converter in stock location; Pre-catalyst vehicles must use original emission control devices; It is the responsibility of the customer to reinstall these devices on the vehicle.

• Fit Note: USA Built Vehicle
• Material: Steel
• Series: Pacesetter Shorty
• Type: 50-state legal, Direct fit
• Color/Finish: Black
• Quantity Sold: Set of 2
• Warranty: 3-year Pacesetter limited warranty
• Design: 4-1

Fits the following 1997-2003 Ford F-150 submodels:

• 2002-2003: King Ranch; All Engines;
• 2002-2003: Lariat; All Engines;

• 2002-2003: XL; All Engines;
• 2002-2003: XLT; All Engines;
• 2001-2003: Harley-Davidson Edition; All Engines;
• 1999-2003: Lightning; All Engines;
• 2001-2001: King Ranch; 8 Cyl 5.4L; "GAS, FI, Naturally Aspirated, VIN L"
• 1997-2001: Lariat; 8 Cyl 5.4L; "GAS, FI, Naturally Aspirated, VIN L"
• 1997-2001: XL; 8 Cyl 5.4L; "GAS, FI, Naturally Aspirated, VIN L"
• 1997-2001: XLT; 8 Cyl 5.4L; "GAS, FI, Naturally Aspirated, VIN L"
• 2000-2000: Harley-Davidson Edition; 8 Cyl 5.4L; "GAS, FI, Naturally Aspirated, VIN L"
• 1997-2000: Base; 8 Cyl 5.4L; "GAS, FI, Naturally Aspirated, VIN L"

GIBSON PERFORMANCE HEADERS, 409L STAINLESS STEEL, NATURAL FINISH, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. tube diameter, 16-gauge tube wall thickness, stock flange collector, 0.375 in. standard head flange; Premium gasket and installation hardware included; Shorty style; Round head port; Direct fit bolt-on replacement for factory exhaust manifold and are proven to provide horsepower and torque power gain; Made of high quality 409L stainless steel mandrel-bent tubing to maintain constant exhaust flow for outstanding performance; They feature heavy duty 0.375 in. thick laser cut port flanges and OEM style connections; They attach to OE crossover pipe; Dyno-tuned and engineered to deliver more usable horsepower and torque; These headers increase the engine's efficiency by allowing it to breathe easier and run at cooler temperature; Well suited for lowered and raised vehicles, street, and off-road; Dyno tested to perform best with Gibson's cat-back exhaust system; For vehicles with EGR fitting.

• Material: Stainless steel
• Series: Gibson Performance
• Type: 49-state legal - no CA shipments, Direct fit
• Color/Finish: Natural
• Quantity Sold: Set of 2
• Warranty: Lifetime Gibson limited warranty
• Design: 4-1

Fits the following 1999-2004 Ford F-350 Super Duty submodels:

• 2004-2004: King Ranch; 8 Cyl 5.4L;
• 1999-2004: Lariat; 8 Cyl 5.4L;

• 1999-2004: XL; 8 Cyl 5.4L;
• 1999-2004: XLT; 8 Cyl 5.4L;

JBA CAT4WARD SHORTY HEADERS, STAINLESS STEEL, NATURAL FINISH, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. tube diameter, 0.375 in. standard head flange; Shorty style; Round head port; They include mandrel-bent stainless steel primary tubes, patented JBA Firecone collector, factory style emission connections, extra thick collector domes, CNC laser-cut flange, oversized exhaust ports, boots, and terminals; Made of tough and durable stainless steel; Constructed through race-proven technology for maximum horsepower and torque gains; They improve throttle response, resist warping, prevent leakage, increase flow, and accommodate cylinder head porting; Direct replacement for factory manifold, installation hardware kit included; Easy installation.

• Material: Stainless steel
• Series: JBA Cat4ward
• Type: 50-state legal, Direct fit
• Color/Finish: Natural
• Quantity Sold: Set of 2
• Design: 4-1

Fits the following 1997-2003 Ford F-150 submodels:

• 2001-2003: King Ranch; 8 Cyl 5.4L;
• 2000-2003: Harley-Davidson Edition; 8 Cyl 5.4L;

• 1999-2003: Lightning; 8 Cyl 5.4L;
• 1997-2003: Lariat; 8 Cyl 5.4L;
• 1997-2003: XL; 8 Cyl 5.4L;
• 1997-2003: XLT; 8 Cyl 5.4L;
• 1997-2000: Base; 8 Cyl 5.4L;

HEDMAN STANDARD DUTY EXHAUST HEADERS, BLACK-PAINTED -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. Tube Size, Stock Collector Size, These Headers Feature 18-Gauge Mandrel-Bent Primary Tubes With 0.25 in. Flanges, Protected By Factory Applied Black Paint For Pre-Installation Protection, They Come With Required Hardware And Gaskets For Installation, Made In USA, Tubular Exhaust Manifold System, Early Chassis Only, Designed For Use With A Trans-Dapt Throttle Body Spacer, Replacement Part, With Hedman's Limited Lifetime Warranty

• Material: Steel
• Series: Hedman Standard Duty
• Type: 49-state legal - no CA shipments, Direct fit
• Color/Finish: Black
• Quantity Sold: Set of 2
• Warranty: Lifetime Hedman limited warranty
• Design: 4-1

Fits the following 1998-2004 Ford F-150 submodels:

• 2004-2004: FX4; 8 Cyl 5.4L;
• 2004-2004: Lariat; 8 Cyl 5.4L;

• 2004-2004: SVT Lightning; 8 Cyl 5.4L;
• 2004-2004: XL; 8 Cyl 5.4L;
• 2004-2004: XLT; 8 Cyl 5.4L;
• 2001-2003: King Ranch; 8 Cyl 5.4L; "GAS, VIN 3"
• 2001-2003: King Ranch; 8 Cyl 5.4L; "GAS, VIN L"
• 2000-2003: Harley-Davidson Edition; 8 Cyl 5.4L; "GAS, VIN 3"
• 2000-2003: Harley-Davidson Edition; 8 Cyl 5.4L; "GAS, VIN L"
• 1999-2003: Lariat; 8 Cyl 5.4L; "GAS, VIN 3"
• 1999-2003: Lightning; 8 Cyl 5.4L; "GAS, VIN 3"
• 1999-2003: Lightning; 8 Cyl 5.4L; "GAS, VIN L"
• 1999-2003: XL; 8 Cyl 5.4L; "GAS, VIN 3"
• 1999-2003: XLT; 8 Cyl 5.4L; "GAS, VIN 3"
• 1998-2003: Lariat; 8 Cyl 5.4L; "GAS, VIN L"
• 1998-2003: XL; 8 Cyl 5.4L; "GAS, VIN L"
• 1998-2003: XLT; 8 Cyl 5.4L; "GAS, VIN L"
• 1999-2000: Base; 8 Cyl 5.4L; "GAS, VIN 3"
• 1998-2000: Base; 8 Cyl 5.4L; "GAS, VIN L"

FLOWTECH I STANDARD FULL-LENGTH HEADERS, SATIN BLACK HI-TEMPERATURE PAINTED -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.75 in. tube diameter, 16-gauge tube wall thickness, 3 in. weld-on collector, standard head flange; All mounting hardware such as bolts, nuts, and premium gasket are included; Full-length style; Round head port; These headers are precision-engineered and leak-tested to provide the maximum performance and fuel efficiency of your engine; Formed from specially selected 0.060 cold roll flash controlled tubing with high quality electrostatically-applied satin black paint finish; They feature Flowtech's exclusive, thick, and mandrel-formed power plenum collector; All ports are precisely fitted and finished with sturdy and leaf-proof o-ringed port seals; Must modify stock exhaust to retain catalytic converters; Will not fit 68-72 with camper special gas tanks.

• Fit Note: RWD
• Material: Steel
• Series: Flowtech I
• Type: 49-state legal - no CA shipments, Minor modifications required
• Color/Finish: Black
• Quantity Sold: Set of 2
• Warranty: 90-day Flowtech warranty
• Design: 4-1

Fits the following 1975-1976 Ford F-250 submodels:

• 1976-1976: Base; 8 Cyl 5.9L;
• 1976-1976: Base; 8 Cyl 6.4L;

• 1975-1976: Custom; 8 Cyl 5.9L;
• 1975-1976: Custom; 8 Cyl 6.4L;
• 1975-1976: Northland; 8 Cyl 5.9L;
• 1975-1976: Northland; 8 Cyl 6.4L;
• 1975-1976: Ranger XLT; 8 Cyl 5.9L;
• 1975-1976: Ranger XLT; 8 Cyl 6.4L;
• 1975-1976: Ranger; 8 Cyl 5.9L;
• 1975-1976: Ranger; 8 Cyl 6.4L;

BORLA XR-1 HEADERS, STAINLESS STEEL, NATURAL FINISH, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.75 in. tube diameter, 2.5 in. flange collector; Includes X-pipe, clamps, gaskets, bolt kit, and dipstick spacer; Full-length style; Round head port; Made of high-grade aerospace-quality T-304 stainless steel; Every Borla header employs ultra smooth mandrel-bent tubing, all-welded construction, warp-free flanges, and special race-bred and patented technology, providing the ultimate in power and endurance; Increases flow and power; Accurate fit and easy bolt-on installation ensured and tested through the latest in engineering technology.

• Fit Note: RWD
• Material: Stainless steel
• Type: 49-state legal - no CA shipments, Direct fit
• Color/Finish: Natural
• Quantity Sold: Set of 2
• Warranty: Million-mile Borla limited warranty
• Design: 4-1

Fits the following 2005-2010 Ford Mustang submodels:

• 2005-2010: GT; 8 Cyl 4.6L;
• 2008-2009: Bullitt; 8 Cyl 4.6L;

• 2007-2008: Shelby GT; 8 Cyl 4.6L;

BBK CNC-SERIES FULL-LENGTH HEADERS, POLISHED, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Provides additional power by 14 to 22 h.p.; 1.625 in. tube diameter, 16-gauge tube wall thickness, 0.375 in. standard head flange; Includes gaskets and hardware; Full-length style; Round head port; Feature CNC mandrel-bent tubing for unrestrictive airflow and 1-piece laser cut flange for added strength and durability; Dyno and pressure tested to ensure leak-free and maximum performance; Requires BBK short X-pipe or H-pipe; Easy direct bolt-on installation.

• Fit Note: Standard Transmission
• Material: Steel
• Series: BBK CNC
• Type: 49-state legal - no CA shipments, Direct fit
• Color/Finish: Polished
• Quantity Sold: Set of 2
• Design: 4-1

Fits the following 1996-2004 Ford Mustang submodels:

• 2003-2004: GT; 8 Cyl 4.6L; "Naturally Aspirated, VIN X"
• 2003-2004: Mach I; 8 Cyl 4.6L; "Naturally Aspirated, VIN X"

• 2000-2002: GT; 8 Cyl 4.6L;
• 2001-2001: GT Bullitt; 8 Cyl 4.6L; "VIN X"
• 1996-2001: GT; 8 Cyl 4.6L; "VIN X"
• 1996-2001: SVT Cobra; 8 Cyl 4.6L; "VIN X"

PATRIOT SPECIFIC FIT HEADERS, METALLIC CERAMIC-COATED, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.75 in. tube diameter, 3 in. collector; Includes gaskets, hardware, collector reducers, and installation instructions; Full-length style; SAP port shape; Features ceramic coated tubing that is corrosion and rust resistant; Lowers under hood temperatures for more power and extended product life; Easy to maintain; It has thick machined flanges for great seal; Its high flow mandrel-bent mild steel tubing provides greater horsepower and torque; Fits four barrel heads; Installation requires power steering bracket part number H7609.

• Fit Note: With A/C, P/Brakes, P/Steering, Automatic Floor Shift, Manual Trans Floor Shift Only, Requires Steering Bracket Part Number 7609
• Material: Steel
• Type: 49-state legal - no CA shipments, Direct fit
• Color/Finish: Metallic ceramic coated
• Quantity Sold: Set of 2
• Design: 4-1

Fits the following 1971-1973 Ford Mustang submodels:

• 1971-1973: Base; 6 Cyl 4.1L;
• 1971-1973: Base; 8 Cyl 5.0L;

• 1971-1973: Base; 8 Cyl 5.8L;
• 1971-1973: Grande; 6 Cyl 4.1L;
• 1971-1973: Grande; 8 Cyl 5.0L;
• 1971-1973: Grande; 8 Cyl 5.8L;
• 1971-1973: Mach I; 8 Cyl 5.0L;
• 1971-1973: Mach I; 8 Cyl 5.8L;
• 1971-1971: Base; 8 Cyl 7.0L;
• 1971-1971: Boss 351; 8 Cyl 5.8L;
• 1971-1971: Grande; 8 Cyl 7.0L;
• 1971-1971: Mach I; 6 Cyl 4.1L;
• 1971-1971: Mach I; 8 Cyl 7.0L;

HOOKER COMPETITION HEADER, BLACK HIGH TEMPERATURE PAINT -- Tube Size 1.75 x 28 O.D, Collector Size 3 O.D, Collector Length 8, Port Shape Same As Port, Tuned-Length Primary Tubes For Street Performance, Mandrel-Bent Tubing For Smooth Exhaust Flow, Light Weight And Sturdy 16 Gauge Tubing, Long Transition Collector For Decreased Back Pressure, 5/16%X94 Machined Flanges For A Perfect Seal, All Necessary Hardware Included For A Complete Installation

• Fit Note: 4WD, Reducers Available With Oxygen Sensor PN[11045HKR/11046HKR], Legal Only For Off-Highway/Racing Use
• Material: Steel
• Series: Hooker Competition
• Type: For off road/track use, Direct fit
• Color/Finish: Black
• Quantity Sold: Set of 2
• Design: 4-1

Fits the following 1983-1987 Ford F-350 submodels:

• 1987-1987: Custom; 8 Cyl 7.5L;
• 1985-1987: XLT Lariat; 8 Cyl 7.5L;

• 1983-1987: XL; 8 Cyl 7.5L;
• 1983-1986: Base; 8 Cyl 7.5L;
• 1983-1984: XLT; 8 Cyl 7.5L;
• 1983-1983: XLS; 8 Cyl 7.5L;