Ford Bronco Headers

PACESETTER HEADERS, STEEL, BLACK, SET OF 2 -- Product legal for sale in California under Executive Order (EO) number D-439-5. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application; 1.5 in. tube diameter, 16-gauge tube wall thickness, 2.5 in. flange collector, 0.38 in. standard head flange; Mounting hardware, illustrated instructions, and header extension included to connect to stock system; 4-1 design; Round head port; Easy-to-clean; Features mandrel-bent mild steel primary tubing that is black-painted to reduce under hood temperature and to resist rust and corrosion; Significantly boosts performance and increase engine efficiency; Hook-ups for smog and engine management sensors; Fabrication may be required; Replaces stock exhaust manifold; Bolts to stock down pipe; Retains catalytic converter in stock location; Pre-catalyst vehicles must use original emission control devices; It is the responsibility of the customer to reinstall these devices on the vehicle.

Fits the following 1987-1995 Ford Bronco submodels:

• 1995-1995: XLT Sport; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"
• 1990-1995: XL; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1987-1995: Eddie Bauer; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1987-1995: XLT; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1993-1993: XLT Lariat; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1987-1993: Custom; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

• 1992-1992: XLT Nite; 8 Cyl 5.0L; "GAS, FI, Naturally Aspirated, VIN N"

Fits 5 more submodels. (Show all) Show less info

GIBSON PERFORMANCE HEADERS, STAINLESS STEEL, CHROME, SET OF 2 -- 50-state legal; 1.5 in. tube diameter, 14-gauge tube wall thickness, stock flange connector, 0.38 in. standard head flange; Includes mounting hardware; 4-1 design; Round head port; Made of nickel chrome plating heavy duty 14-gauge mandrel-bent tubing to maintain constant exhaust flow for outstanding performance; They feature heavy duty 0.375 in. thick laser cut port flanges and OEM style connections; They attach to OE crossover pipe; Dyno-tuned and engineered to deliver more usable horsepower and torque; These headers increase the engine's efficiency by allowing it to breathe easier and run at cooler temperature; Well suited for lowered and raised vehicles, street, and off-road; Dyno tested to perform best with Gibson's cat-back exhaust system; For vehicles without air injection.

Fits the following 1987-1995 Ford Bronco submodels:

• 1995-1995: XLT Sport; 8 Cyl 5.0L;
• 1990-1995: XL; 8 Cyl 5.0L;

• 1987-1995: Eddie Bauer; 8 Cyl 5.0L;

• 1987-1995: XLT; 8 Cyl 5.0L;

• 1993-1993: XLT Lariat; 8 Cyl 5.0L;

• 1987-1993: Custom; 8 Cyl 5.0L;

• 1992-1992: XLT Nite; 8 Cyl 5.0L;

Fits 5 more submodels. (Show all) Show less info

JBA CAT4WARD SHORTY HEADERS, STAINLESS STEEL, TITANIUM CERAMIC, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. tube diameter, 0.375 in. standard head flange; Shorty style; Round head port; They include mandrel-bent stainless steel primary tubes, patented JBA Firecone collector, factory style emission connections, extra thick collector domes, CNC laser-cut flange, and oversized exhaust ports; Made of tough and durable stainless steel; Constructed through race-proven technology for maximum horsepower and torque gains; They improve throttle response, resist warping, prevent leakage, increase flow, and accommodate cylinder head porting; Direct replacement for factory manifold, installation hardware kit included; Easy installation.

Fits the following 1987-1995 Ford Bronco submodels:

• 1995-1995: XLT Sport; 8 Cyl 5.0L;
• 1990-1995: XL; 8 Cyl 5.0L;

• 1987-1995: Eddie Bauer; 8 Cyl 5.0L;

• 1987-1995: XLT; 8 Cyl 5.0L;

• 1993-1993: XLT Lariat; 8 Cyl 5.0L;

• 1987-1993: Custom; 8 Cyl 5.0L;

• 1992-1992: XLT Nite; 8 Cyl 5.0L;

Fits 5 more submodels. (Show all) Show less info

PAINTED HEDDER, EXHAUST HEADER -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Tube Size 1.5 in., Stock Collector, Without Smog Injection Or Injection Heads, Tubular Exhaust Manifold System, 16 Gauge Tubing

Fits the following 1986-1996 Ford Bronco submodels:

• 1995-1996: XLT Sport; 8 Cyl 5.8L;
• 1990-1996: XL; 8 Cyl 5.8L;

• 1986-1996: Eddie Bauer; 8 Cyl 5.8L;

• 1986-1996: XLT; 8 Cyl 5.8L;

• 1993-1993: XLT Lariat; 8 Cyl 5.8L;

• 1986-1993: Custom; 8 Cyl 5.8L;

• 1992-1992: XLT Nite; 8 Cyl 5.8L;

Fits 5 more submodels. (Show all) Show less info

FLOWTECH I STANDARD FULL-LENGTH HEADERS, SATIN BLACK HI-TEMPERATURE PAINTED -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. tube diameter, 16-gauge tube wall thickness, 2.5 in. weld-on collector, standard head flange; All mounting hardware such as bolts, nuts, and premium gasket are included; Full-length style; Round head port; These headers are precision-engineered and leak-tested to provide the maximum performance and fuel efficiency of your engine; Formed from specially selected 0.060 cold roll flash controlled tubing with high quality electrostatically-applied satin black paint finish; They feature Flowtech's exclusive, thick, and mandrel-formed power plenum collector; All ports are precisely fitted and finished with sturdy and leaf-proof o-ringed port seals; Must modify stock exhaust to retain catalytic converters.

Fits the following 1981-1995 Ford Bronco submodels:

• 1995-1995: XLT Sport; 8 Cyl 5.8L;
• 1990-1995: XL; 8 Cyl 5.8L;

• 1985-1995: Eddie Bauer; 8 Cyl 5.8L;

• 1984-1995: XLT; 8 Cyl 5.8L;

• 1982-1993: XLT Lariat; 8 Cyl 5.8L;

• 1981-1993: Custom; 8 Cyl 5.8L;

• 1992-1992: XLT Nite; 8 Cyl 5.8L;

• 1982-1983: XLS; 8 Cyl 5.8L;

• 1981-1981: Ranger XLT; 8 Cyl 5.8L;

Fits 7 more submodels. (Show all) Show less info

HOOKER COMPETITION HEADER, BLACK HIGH TEMPERATURE PAINT -- Tube Size 1.5 x 27 O.D, Collector Size 2.5 O.D, Collector Length 8, Port Shape Same As Port, Tuned-Length Primary Tubes For Street Performance, Mandrel-Bent Tubing For Smooth Exhaust Flow, Light Weight And Sturdy 16 Gauge Tubing, Long Transition Collector For Decreased Back Pressure, 5/16%X94 Machined Flanges For A Perfect Seal, All Necessary Hardware Included For A Complete Installation

Fits the following 1981-1995 Ford Bronco submodels:

• 1995-1995: XLT Sport; 8 Cyl 5.8L;
• 1990-1995: XL; 8 Cyl 5.8L;

• 1985-1995: Eddie Bauer; 8 Cyl 5.8L;

• 1984-1995: XLT; 8 Cyl 5.8L;

• 1982-1993: XLT Lariat; 8 Cyl 5.8L;

• 1981-1993: Custom; 8 Cyl 5.8L;

• 1992-1992: XLT Nite; 8 Cyl 5.8L;

• 1982-1983: XLS; 8 Cyl 5.8L;

• 1981-1981: Ranger XLT; 8 Cyl 5.8L;

Fits 7 more submodels. (Show all) Show less info