Ford Ranger Headers

PACESETTER HEADERS, STEEL, BLACK, SET OF 2 -- For off road use - Not legal for use on public roads and highways; 1.5 in. tube diameter, 16-gauge tube wall thickness, 3 in. flange collector, 0.375 in. standard head flange; Gaskets, hardware, illustrated instructions, and header extension included to connect to stock system; Shorty style; Round head port; Easy-to-clean; Features mandrel-bent mild steel primary tubing that is black-painted to reduce under hood temperature and to resist rust and corrosion; Significantly boosts performance and increase engine efficiency; Hook-ups for smog and engine management sensors; Fabrication may be required; Not legal for use on catalyst-equipped vehicles except for racing vehicles which may not be operated on a highway; Pre-catalyst vehicles must use original emission control devices; It is the responsibility of the customer to reinstall these devices on the vehicle.

Fits the following 1995-1997 Ford Ranger submodels:

• 1997-1997: Sport; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN X"
• 1995-1997: STX; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN X"

• 1995-1997: Splash; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN X"

• 1995-1997: XL; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN X"

• 1995-1997: XLT; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN X"

• 1995-1995: XL Sport; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN X"

Fits 4 more submodels. (Show all) Show less info

GIBSON PERFORMANCE HEADERS, STAINLESS STEEL, NICKEL CHROME PLATED, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. tube diameter, 14-gauge tube wall thickness, stock flange connector, 0.375 in. standard head flange; Premium gasket and installation hardware included; Shorty style; Round head port; Direct fit bolt-on replacement for factory exhaust manifold; Made of nickel chrome plating heavy duty 14-gauge mandrel-bent tubing to maintain constant exhaust flow for outstanding performance; They feature heavy duty 0.375 in. thick laser cut port flanges and OEM style connections; They attach to OE crossover pipe; Dyno-tuned and engineered to deliver more usable horsepower and torque; These headers increase the engine's efficiency by allowing it to breathe easier and run at cooler temperature; Well suited for lowered and raised vehicles, street, and off-road; Dyno tested to perform best with Gibson's cat-back exhaust system; For vehicles with female driver side EGR.

Fits the following 2001-2007 Ford Ranger submodels:

• 2006-2007: STX; 6 Cyl 4.0L;
• 2006-2007: Sport; 6 Cyl 4.0L;

• 2005-2007: FX4; 6 Cyl 4.0L;

• 2001-2007: XL; 6 Cyl 4.0L;

• 2001-2007: XLT; 6 Cyl 4.0L;

• 2001-2005: Edge; 6 Cyl 4.0L;

Fits 4 more submodels. (Show all) Show less info

JBA CAT4WARD SHORTY HEADERS, STAINLESS STEEL, SILVER CERAMIC, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. tube diameter, 0.375 in. standard head flange; Shorty style; Round head port; They include mandrel-bent stainless steel primary tubes, patented JBA Firecone collector, factory style emission connections, extra thick collector domes, CNC laser-cut flange, and oversized exhaust ports; Made of tough and durable stainless steel; Constructed through race-proven technology for maximum horsepower and torque gains; They improve throttle response, resist warping, prevent leakage, increase flow, and accommodate cylinder head porting; Direct replacement for factory manifold, installation hardware kit included; For vehicles without EGR; Easy installation.

Fits the following 2003-2007 Ford Ranger submodels:

• 2006-2007: STX; 6 Cyl 4.0L;
• 2006-2007: Sport; 6 Cyl 4.0L;

• 2005-2007: FX4; 6 Cyl 4.0L;

• 2003-2007: XL; 6 Cyl 4.0L;

• 2003-2007: XLT; 6 Cyl 4.0L;

• 2003-2005: Edge; 6 Cyl 4.0L;

• 2004-2004: Tremor; 6 Cyl 4.0L;

Fits 5 more submodels. (Show all) Show less info

ENGINE SWAP HEDDER -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Tube Size 1 1/2 in., Collector Size 2 1/2 in., Shortie style HEDDER, Maximum ground clearance, Must use Trans-Dapt Performance swap mount kit number 9736

Fits the following 1983-1997 Ford Ranger submodels:

• 1983-1997: All Submodels; All Engines;