Jeep Cherokee Headers

PACESETTER HEADERS, STEEL, BLACK, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. tube diameter, 16-gauge tube wall thickness, 2 in. collector, 0.38 in. standard head flange; Gasket, reducer, and header extension included to connect to stock system; 4-2-1, two-piece design; Round head port; Easy-to-clean; Features mandrel-bent mild steel primary tubing that is black-painted to reduce under hood temperature and to resist rust and corrosion; Significantly boosts performance and increase engine efficiency; Pre-catalyst vehicles must use original emission control devices; It is the responsibility of the customer to reinstall these devices on the vehicle.

Fits the following 1994-1999 Jeep Cherokee submodels:

• 1998-1999: Classic; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN S"
• 1998-1999: Limited; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN S"

• 1997-1999: SE; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN S"

• 1997-1999: Sport; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN S"

• 1997-1997: Country; 6 Cyl 4.0L; "GAS, FI, Naturally Aspirated, VIN S"

• 1996-1996: Classic; All Engines;

• 1994-1996: Country; All Engines;

• 1994-1996: SE; All Engines;

• 1994-1996: Sport; All Engines;

Fits 7 more submodels. (Show all) Show less info

GIBSON PERFORMANCE HEADERS, STAINLESS STEEL, NICKEL CHROME PLATED, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. tube diameter, 14-gauge tube wall thickness, stock flange connector, 0.375 in. standard head flange; Includes head gasket, washers, nuts, bolts, and exhaust donut; Shorty style; Round head port; Made of nickel chrome plating heavy duty 14-gauge mandrel-bent tubing to maintain constant exhaust flow for outstanding performance; Feature heavy duty 0.375 in. thick laser cut port flanges and OEM style connections; Dyno-tuned and engineered to deliver more usable horsepower and torque; Improves the engine's efficiency by allowing it to breathe easier and run at cooler temperature; Well suited for lowered and raised vehicles, street, and off-road; Dyno tested to perform best with Gibson's cat-back exhaust system.

Fits the following 1991-1999 Jeep Cherokee submodels:

• 1996-1999: Classic; 6 Cyl 4.0L;
• 1994-1999: SE; 6 Cyl 4.0L;

• 1991-1999: Limited; 6 Cyl 4.0L;

• 1991-1999: Sport; 6 Cyl 4.0L;

• 1993-1997: Country; 6 Cyl 4.0L;

• 1991-1993: Base; 6 Cyl 4.0L;

• 1991-1992: Briarwood; 6 Cyl 4.0L;

• 1991-1992: Laredo; 6 Cyl 4.0L;

Fits 6 more submodels. (Show all) Show less info

HEDMAN STANDARD DUTY HTC EXHAUST HEADERS, STEEL, CERAMIC METALLIC-COATED -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.75 in. tube diameter, 18-gauge tube wall thickness, 3 in. flange collector, 0.25 in. standard head flange; Premium gasket and installation hardware included; Full-length style; Round head port; Coated with Hedman's premium ceramic-metallic substance that protects the headers against harsh elements and withstands temperature up to 1400 degrees Fahrenheit; This coating keeps more heat inside the tubes to speed up the exhaust flow, providing better performance and cooler under hood temperatures; Made in USA; Modification to stock exhaust required to retain catalytic converter.

Fits the following 1980-1983 Jeep Cherokee submodels:

• 1983-1983: Pioneer; 8 Cyl 5.9L;
• 1981-1983: Chief; 8 Cyl 5.9L;

• 1980-1983: Base; 8 Cyl 5.9L;

• 1980-1980: Wide Track; 8 Cyl 5.9L;

Fits 2 more submodels. (Show all) Show less info

BORLA HEADERS, STAINLESS STEEL, NATURAL FINISH, SET OF 2 -- Product legal for sale in California under Executive Order (EO) number D-276-10. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application; Includes required gaskets and hardware; 3-1 design; Round head port; Made of high-grade aerospace-quality T-304 stainless steel; Every Borla header employs ultra smooth mandrel-bent tubing, all-welded construction, warp-free flanges, and special race-bred and patented technology, providing the ultimate in power and endurance; Increases flow and power; Accurate fit and easy bolt-on installation ensured and tested through the latest in engineering technology.

Fits the following 1993-1997 Jeep Cherokee submodels:

• 1994-1997: SE; 6 Cyl 4.0L;
• 1993-1997: Country; 6 Cyl 4.0L;

• 1993-1997: Sport; 6 Cyl 4.0L;

• 1996-1996: Classic; 6 Cyl 4.0L;

• 1993-1993: Base; 6 Cyl 4.0L;

Fits 3 more submodels. (Show all) Show less info

BANKS TORQUE TUBES EXHAUST MANIFOLD ASSEMBLY, 409 STAINLESS STEEL, NATURAL FINISH -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Flange collector; Standard head flange; Includes seamless Y-collector, gasket, and other mounting hardware; Round head port; Made of tough and durable 409 stainless steel; Designed to optimize exhaust flow and engine efficiency; Features a dead-flat, half-inch, and bolt-on flange that is made with precision-fit port pattern and is impervious to cracking and separating; The assembly comes with an extra thick gasket that stands up to super-hot temperatures; Bolt-on installation.

Fits the following 2000-2001 Jeep Cherokee submodels:

• 2000-2001: Classic; 6 Cyl 4.0L;
• 2000-2001: Limited; 6 Cyl 4.0L;

• 2000-2001: SE; 6 Cyl 4.0L;

• 2000-2001: Sport; 6 Cyl 4.0L;

Fits 2 more submodels. (Show all) Show less info

OMIX TORQUE TUBE HEADERS, STAINLESS STEEL -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Made From High Quality 409 Stainless Steel, Designed To Increase Performance And Horsepower, Includes Manifold, Gasket, Hardware, And Down Pipe Flange Gasket, With Manufacturer's Limited Warranty

Fits the following 1991-1998 Jeep Cherokee submodels:

• 1996-1998: Classic; 6 Cyl 4.0L;
• 1994-1998: SE; 6 Cyl 4.0L;

• 1991-1998: Limited; 6 Cyl 4.0L;

• 1991-1998: Sport; 6 Cyl 4.0L;

• 1993-1997: Country; 6 Cyl 4.0L;

• 1991-1993: Base; 6 Cyl 4.0L;

• 1991-1992: Briarwood; 6 Cyl 4.0L;

• 1991-1992: Laredo; 6 Cyl 4.0L;

Fits 6 more submodels. (Show all) Show less info