Mitsubishi Headers Performance

PACESETTER HEADER, STEEL, BLACK, SOLD INDIVIDUALLY -- Product legal for sale in California under Executive Order (EO) number D-439-4. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application; 1.63 in. tube diameter, 16-gauge tube wall thickness, 2.25 in. flange collector, 0.38 in. standard head flange; Gasket included; 4-1, one-piece design; Round head port; Easy-to-clean; Features mandrel-bent mild steel primary tubing that is black-painted to reduce under hood temperature and to resist rust and corrosion; Significantly boosts performance and increase engine efficiency; Hook-ups for smog and engine management sensors; Pre-catalyst vehicles must use original emission control devices; It is the responsibility of the customer to reinstall these devices on the vehicle.

Fits the following 1990-1999 Mitsubishi Eclipse submodels:

• 1999-1999: GSX; 4 Cyl 2.0L; "Turbocharged"
• 1999-1999: Spyder GST; 4 Cyl 2.0L; "Turbocharged"

• 1990-1999: GST; 4 Cyl 2.0L; "Turbocharged"

• 1996-1998: Spyder GST; 4 Cyl 2.0L; "GAS, FI, 4G63, Turbocharged, VIN F"

• 1995-1998: GST; 4 Cyl 2.0L; "GAS, FI, 4G63, Turbocharged, VIN F"

• 1995-1998: GSX; 4 Cyl 2.0L; "GAS, FI, 4G63, Turbocharged, VIN F"

• 1993-1994: GSX; 4 Cyl 2.0L; "GAS, FI, Turbocharged, VIN F"

• 1990-1994: GS; 4 Cyl 2.0L; "Turbocharged"

• 1990-1992: GSX; 4 Cyl 2.0L; "GAS, FI, Turbocharged, VIN U"

Fits 7 more submodels. (Show all) Show less info

HEDMAN STANDARD DUTY EXHAUST HEADERS, BLACK-PAINTED -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. Tube Size, Stock Collector Size, These Headers Feature 18-Gauge Mandrel-Bent Primary Tubes With 0.25 in. Flanges, Protected By Factory Applied Black Paint For Pre-Installation Protection, They Come With Required Hardware And Gaskets For Installation, Made In USA, Legal For Racing Vehicles Only And Not Applicable Or Intended For Street Or Highway Use, With E.G.R., Will Not Fit To Engines With Precats, With Hedman's Limited Lifetime Warranty

Fits the following 1995-1999 Mitsubishi Eclipse submodels:

• 1996-1999: Spyder GST; 4 Cyl 2.0L;
• 1995-1999: GS; 4 Cyl 2.0L;

• 1995-1999: GST; 4 Cyl 2.0L;

• 1995-1999: GSX; 4 Cyl 2.0L;

• 1995-1999: RS; 4 Cyl 2.0L;

• 1996-1997: Base; 4 Cyl 2.0L;

Fits 4 more submodels. (Show all) Show less info

OE REPLACEMENT HEADERS, NEW

Replace your damaged factory unit with new headers from Replacement! Replacement OE Comparable headers - Brand New is a guaranteed 100% brand new part and not rebuilt! It has NO core charge that removes the trouble of returning the old part for a core refund. These OE comparable headers support most import and domestic vehicles. Replace your aged or defective part, today.

Replacement brand parts are the most affordable solution for your replacement needs! Replacement specializes in a wide range of OE comparable auto parts including body parts, lighting, electrical, brakes, suspension, intake, exhaust, cooling and heating parts. All Replacement brand items are backed by 1-year, unlimited-mileage warranty.

Fits the following 1990-1999 Mitsubishi Eclipse submodels:

• 1996-1999: Spyder GST; 4 Cyl 2.0L;
• 1995-1999: RS; 4 Cyl 2.0L;

• 1990-1999: GS; 4 Cyl 2.0L;

• 1990-1999: GST; 4 Cyl 2.0L;

• 1990-1999: GSX; 4 Cyl 2.0L;

• 1996-1997: Base; 4 Cyl 2.0L;

Fits 4 more submodels. (Show all) Show less info

PACESETTER HEADER, STEEL, BLACK, SOLD INDIVIDUALLY -- Product legal for sale in California under Executive Order (EO) number D-439-4. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application; 1.63 in. tube diameter, 16-gauge tube wall thickness, 2 in. flange collector, 0.38 in. standard head flange; Gasket, reducer, and header extension included to connect to stock system; 4-2-1, two-piece design; Round head port; Easy-to-clean; Features mandrel-bent mild steel primary tubing that is black-painted to reduce under hood temperature and to resist rust and corrosion; Significantly boosts performance and increase engine efficiency; Hook-ups for smog and engine management sensors; Fabrication may be required; Pre-catalyst vehicles must use original emission control devices; It is the responsibility of the customer to reinstall these devices on the vehicle.

Fits the following 1990-1994 Mitsubishi Eclipse submodels:

• 1993-1994: GS; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN E"
• 1990-1992: GS; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN R"

PACESETTER HEADER, STEEL, BLACK, SOLD INDIVIDUALLY -- Product legal for sale in California under Executive Order (EO) number D-439-4. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application; 1.63 in. tube diameter, 16-gauge tube wall thickness, 2.25 in. flange collector, 0.38 in. standard head flange; Gasket, reducer, and header extension included to connect to stock system; 4-2-1, two-piece design; Round head port; Easy-to-clean; Features mandrel-bent mild steel primary tubing that is black-painted to reduce under hood temperature and to resist rust and corrosion; Significantly boosts performance and increase engine efficiency; Hook-ups for smog and engine management sensors; Pre-catalyst vehicles must use original emission control devices; It is the responsibility of the customer to reinstall these devices on the vehicle.

Fits the following 1995-1999 Mitsubishi Eclipse submodels:

• 1999-1999: RS; 4 Cyl 2.0L; "GAS, FI, 420A, Naturally Aspirated, VIN Y"
• 1996-1999: GS; 4 Cyl 2.0L; "GAS, FI, 420A, Naturally Aspirated, VIN Y"

• 1996-1999: Spyder GS; All Engines;

• 1996-1999: Spyder GST; All Engines;

• 1995-1999: GST; All Engines;

• 1995-1999: GSX; All Engines;

• 1996-1998: RS; All Engines;

• 1996-1997: Base; 4 Cyl 2.0L; "GAS, FI, 420A, Naturally Aspirated, VIN Y"

• 1995-1995: GS; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN Y"

• 1995-1995: RS; 4 Cyl 2.0L; "GAS, FI, Naturally Aspirated, VIN Y"

Fits 8 more submodels. (Show all) Show less info