Toyota Tacoma Pick Up Headers

PACESETTER HEADER, STEEL, BLACK, SOLD INDIVIDUALLY -- For off road use - Not legal for use on public roads and highways; 1.5 in. tube diameter, 16-gauge tube wall thickness, 2.25 in. flange collector, 0.375 in. standard head flange; Gaskets, hardware, illustrated instructions, and header extension included to connect to stock system; Full-length style; Round head port; Easy-to-clean; Features mandrel-bent mild steel primary tubing that is black-painted to reduce under hood temperature and to resist rust and corrosion; Significantly boosts performance and increase engine efficiency; Hook-ups for smog and engine management sensors; Fabrication may be required; Not legal for use on catalyst-equipped vehicles except for racing vehicles which may not be operated on a highway; Pre-catalyst vehicles must use original emission control devices; It is the responsibility of the customer to reinstall these devices on the vehicle.

Fits the following 1996-2000 Toyota Tacoma submodels:

• 2000-2000: Limited; 4 Cyl 2.7L; "GAS, FI, 3RZFE, Naturally Aspirated"
• 2000-2000: SR5; 4 Cyl 2.7L; "GAS, FI, 3RZFE, Naturally Aspirated"

• 1999-2000: DLX; 4 Cyl 2.7L; "GAS, FI, 3RZFE, Naturally Aspirated"

• 1999-2000: Pre Runner; 4 Cyl 2.7L; "GAS, FI, 3RZFE, Naturally Aspirated"

• 1998-1999: Limited; All Engines;

• 1996-1999: SR5; All Engines;

• 1998-1998: Pre Runner; 4 Cyl 2.7L; "GAS, FI, 3RZFE, Naturally Aspirated, VIN M"

• 1996-1998: DLX; 4 Cyl 2.7L; "GAS, FI, 3RZFE, Naturally Aspirated, VIN M"

Fits 6 more submodels. (Show all) Show less info

GIBSON PERFORMANCE HEADERS, STAINLESS STEEL, NICKEL CHROME PLATED, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. tube diameter, 14-gauge tube wall thickness, stock flange connector, 0.375 in. standard head flange; Premium gasket and installation hardware included; Shorty style; Round head port; Direct fit bolt-on replacement for factory exhaust manifold; Made of nickel chrome plating heavy duty 14-gauge mandrel-bent tubing to maintain constant exhaust flow for outstanding performance; They feature heavy duty 0.375 in. thick laser cut port flanges and OEM style connections; They attach to OE crossover pipe; Dyno-tuned and engineered to deliver more usable horsepower and torque; These headers increase the engine's efficiency by allowing it to breathe easier and run at cooler temperature; Well suited for lowered and raised vehicles, street, and off-road; Dyno tested to perform best with Gibson's cat-back exhaust system.

Fits the following 2001-2004 Toyota Tacoma submodels:

• 2004-2004: Base; 6 Cyl 3.4L;
• 2001-2004: Pre Runner; 6 Cyl 3.4L;

• 2001-2004: S-Runner; 6 Cyl 3.4L;

• 2001-2003: DLX; 6 Cyl 3.4L;

Fits 2 more submodels. (Show all) Show less info

JBA CAT4WARD SHORTY HEADERS, STAINLESS STEEL, SILVER CERAMIC, SET OF 2 -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.5 in. tube diameter, 0.375 in. standard head flange; Shorty style; Round head port; They include mandrel-bent stainless steel primary tubes, patented JBA Firecone collector, factory style emission connections, extra thick collector domes, CNC laser-cut flange, and oversized exhaust ports; Made of tough and durable stainless steel; Constructed through race-proven technology for maximum horsepower and torque gains; They improve throttle response, resist warping, prevent leakage, increase flow, and accommodate cylinder head porting; Installation requires welding or modification to exhaust system.

Fits the following 2005-2007 Toyota Tacoma submodels:

• 2005-2007: Base; 6 Cyl 4.0L;
• 2005-2007: Pre Runner; 6 Cyl 4.0L;

• 2005-2007: X-Runner; 6 Cyl 4.0L;

Fits 1 more submodels. (Show all) Show less info