APWPART FINDER
My Vehicle Add New
  • Select Year
  • Select Make
  • Select Model
  • Select Submodel
  • Select Engine

Shop by Brand

Chevy S10 Blazer Helper Spring

We have 5 Items In-stock.
$96.24 List Price $133.47 Save $37.23 Availability: In Stock
  • APW Bestseller
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)

HELLWIG – LOAD PRO ADJUSTABLE HELPER SPRINGS

Do you regularly use your truck for towing or carrying heavy loads? Installing Hellwig Load Pro Helper Springs will stabilize your truck and improve the stance under those driving conditions. You can also expect improved handling and say goodbye to bottoming out with the extra support that these heavy-duty helper springs offer. A legendary heavy duty suspension components company, the founder Rudy Hellwig was the first to market helper springs way back in 1946. Fast forward to today and Hellwig is still an all American family owned company, now managed by the 4th generation Hellwig family. The commitment to innovation and quality continues, as Hellwig’s heavy duty suspension products are fitted on Military Humvees, Mine Resistant Ambush Protected Military Vehicles, Tactical Army Command Military Vehicles and numerous law enforcement agency vehicles, all used daily in the most severe driving conditions on the planet. For highly responsive handling in emergency security situations even the Secret Service vehicles in the President’s motorcade have Hellwig heavy-duty suspension components installed. With Hellwig’s track record of quality manufactured products being used in the most severe driving environments possible, you will have peace of mind when you install Hellwig suspension components on your vehicle knowing it will be ready to tow heavy trailers or handle the curviest roads without drama.

  • 100% manufactured in a ISO 9001 quality certified factory in USA
  • Favored by 5th wheel and gooseneck trailer towing users
  • Perfect for ¾ ton and 1 ton vans and pickups
  • Minimizes axle wrap
  • Lessens suspension fatigue and enhances vehicle stability and when loaded or towing
  • Engineered for the heaviest trailer towing and the heaviest loads
  • Improved tire wear
  • Ends sagging leaf springs and prevents your vehicle from bottoming out when loaded or towing
  • When unloaded helper springs do not affect the performance of your vehicle
  • Available in constant rate or progressive rate models with a choice of 3 or 4 leaf versions
  • Choice of mounting kits for 2 ½ or 3 inch wide leaf springs, (sold separately)
  • Powdercoated hammertone finish for longevity
  • Available in pairs only
  • Will not void your vehicle’s manufacturer warranty

NOTE: Never exceed your vehicle’s Gross Vehicle Weight Rating (GVWR). Helper Springs will not increase the load carrying capacity of your vehicle at all. They are designed to improve driving and handling characteristics for increased driving safety when carrying a load or towing.

  • SKU#: H63815
  • Brand: Hellwig
  • Anticipated Ship Out Time: 3-4 business days
  • Includes: Leaf helper springs, heavy duty U-bolts and other mounting hardware
  • Load Capacity: 1500 lbs.
  • Warranty: Million-mile Hellwig limited warranty
 
Fits the following Chevrolet S10 Blazer Years:
  • 1994 | All Engines | All Submodels
Rating: (see review/s)

"so far it's worked well for what i have used it for." posted by: junkcar on May 18, 2011

"over all good product makes the ride stiffer and easy and simple installation, however not what I thought it was going to be but that's my fault" posted by: Stalker on March 26, 2010 view all 3 reviews

$35.99 List Price $46.82 Save $10.83 Availability: In Stock
  • APW Bestseller
  • Low Price Guarantee
(

more

)
PRO COMP SHORT ADD-A-LEAFS, STEEL, SET OF 2 -- 2.36 in. leaf spring width; Provides 1.5-2.5 in. lift; Includes 2 leafs and new centering bolts; Boosts the height and strength of a rear spring suffering from fatigue; Usable with a lift block kit; Not for use with steel or fiberglass monoleafs.
  • SKU#: E3713120
  • Brand: Pro Comp
  • Quantity Sold: Set of 2
  • Anticipated Ship Out Time: 1-2 Business Days
  • Includes: Centering bolt
  • Lift Amount: 1.5-2 in.
  • Notes: Includes two short single leafs and centering bolts
(see more)
Fits the following Chevrolet S10 Blazer Years:
  • 1983-1994 | All Engines | All Submodels
Rating: (see review/s)

"There really werent any good instructions given fortunately leaf springs are a fairly simple design so I figured it out. Prior to adding this helper spring the rear of my truck sat lower than the front I had compensated by lowering the front via torsion bar adjustment. As the years went by I had to lower the front even more as the rear sagged more. After installing the helper the rear of my truck raised up 2- 2 1/2 then I was able to re-lift the front an appropriate amount. It made the rear only slightly stiffer unloaded but now has load carrying capacity as the springs were completely flat across even while unloaded. So it is a great method of renewing the life of your springs on the cheap. I am sure that the ride I am getting from my vehicle is very much closer to original when it was new." posted by: Restorer on November 1, 2013

$74.95 List Price $88.44 Save $13.49 Availability: In Stock
  • APW Bestseller
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
ROUGH COUNTRY ADD-A-LEAF KIT
  • 2.5 in. width, 48.5 in. length
  • Bolts-in to correct or add height
  • Adds weight carrying capacity
  • Helps level truck with heavy load, plow or heavy bumper
Vehicles with front leaf spring can level vehicle with snow plow or heavy bumpers and winches. Adds overall 1.5-2 in. lift, exact lift will vary, depending on engine size and accessories. Add-a-leafs not intended for use with other devices to lift vehicles. Note: Longer shocks recommended, but not required.
  • SKU#: ROU6112
  • Brand: Rough Country
  • Fit Note: 1/2 And 3/4 Ton, 1-1/2 in. TO 2 in. Lift, 4WD, 1-1/2 in. TO 2 in. Lift
  • Quantity Sold: Set of 2
  • Anticipated Ship Out Time: 2-3 business days
 
Fits the following Chevrolet S10 Blazer Years:
  • 1994 | All Engines | LT
  • 1993-1994 | All Engines | Base, Tahoe LT, Tahoe
(see more)
$78.90 List Price $93.10 Save $14.20 Availability: In Stock
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
FABTECH SMOOTH RIDE ADD-A-LEAFS, REAR, PAIR -- Provides 1.5 in. Lift, Features Modern Thin Leaf Technology, Ensures A Smooth Ride, Easy Installation, Comes With Fabtech's Limited Lifetime Warranty
  • SKU#: F37FTS202
  • Brand: Fabtech
  • Fit Note: RWD, 1.5 in. Lift
  • Quantity Sold: Set of 2
  • Anticipated Ship Out Time: 1-2 Business Days
  • Lift Amount: 1.5 in.
  • Warranty: Lifetime Fabtech limited warranty
 
Fits the following Chevrolet S10 Blazer Years:
  • 1994 | All Engines | LT
  • 1991-1994 | All Engines | Tahoe LT
(see more)
$214.67 List Price $253.31 Save $38.64 Availability: In Stock
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)

TIMBREN – SES HELPER SPRINGS

SES helper springs by Timbren are designed to dramatically improve your vehicle’s suspension performance and eliminate sag and body roll associated with towing. Timbren develops superior suspension systems and towing kits that allow truck drivers to use their trucks for what they were designed for without compromising ride quality.

  • Designed to boost your vehicle’s performance and suspension geometry
  • Keeps vehicle in better control
  • Eliminates roll and suspension sag while towing
  • Easy to install without a drill or need for airlines
  • Adjusts automatically when road conditions change or load shifts
  • Direct fit by year, make and model of vehicle
  • SKU#: TBNGMRS10A
  • Brand: Timbren
  • Fit Note: Rear Axle
  • Load Capacity: 2000 lbs.
  • Mounting Kit Included: Yes
  • Warranty: 5-year (from date of purchase) or 250,000 miles Timbren limited warranty
 
Fits the following Chevrolet S10 Blazer Years:
  • 1983-1994 | All Engines | All Submodels
Select more Chevy S10 Blazer parts under Lowering, Leveling & Lifting Kits from list below.