Buick Skyhawk Ignition Coil

IGNITION COIL -- Square; male/HEI wire attachment style; 48,000 V maximum voltage; 85:1 turns ratio; 0.450 ohms primary resistance; 5.5 k ohms secondary resistance; Polyurethane internal construction; A high quality, direct fit OE replacement ignition coil.

Fits the following 1982-1986 Buick Skyhawk submodels:

• 1982-1982: Custom; 4 Cyl 1.8L;
• 1982-1982: Limited; 4 Cyl 1.8L;

• 1983-1986: Custom; 4 Cyl 2.0L;

• 1983-1986: Limited; 4 Cyl 2.0L;

• 1986-1986: Sport; 4 Cyl 2.0L;

Fits 3 more submodels. (Show all) Show less info

ACCEL SUPER DIS COIL, YELLOW -- Male/HEI wire attachment style, coil pack style, rectangular, 0.5 ohms primary resistance, 8 k ohms secondary resistance, 45,000 volts maximum voltage, 75:1 turns ratio; Offers significant peak increases of 11 percent in energy, 10 percent in voltage, 21 percent in dwell and 12 percent in current versus OE; Features brass contact that increases energy transfer and resists corrosion better than aluminum; Silicone internal construction, raised dome construction; Section bobbin technology; Highly specialized silicone magnetic steel core along with optimized windings, resistance and turns ratio produces higher energy and voltage outputs and longer dwell; Compatible with OE computer controlled ignition system as well as crane or MSD capacitive discharge ignition systems; Special high temperature epoxy resists shock and vibration while increasing thermal conductivity; Does not include mounting bracket, coil wire and ballast resistor; With Accel's limited 90-day warranty.

Fits the following 1987-1989 Buick Skyhawk submodels:

• 1987-1987: Limited; 4 Cyl 2.0L; "GAS, FI, VIN 1"
• 1987-1987: Sport; 4 Cyl 2.0L; "GAS, FI, VIN 1"

• 1987-1989: Custom; 4 Cyl 2.0L; "GAS, FI, VIN 1"

• 1988-1989: SE; 4 Cyl 2.0L; "GAS, FI, VIN 1"

Fits 2 more submodels. (Show all) Show less info

ACCEL HEI REMOTE MOUNT SUPER COIL, BLACK/YELLOW -- Male/HEI wire attachment style, E-core style, square, 0.3 ohms primary resistance, 48,000 V maximum voltage, 134:1 turns ratio, 8.8 k ohms secondary resistance; Does not include mounting bracket, coil wire and ballast resistor; Offers significant peak increases of 36 percent in energy and 27 percent in voltage against OE; Features brass contact that increases energy transfer and resists corrosion better than aluminum; Epoxy internal construction; Engineered with optimized low resistance; High turns ratio windings around an M36 high Silicone magnetic steel E-core; Delivers quicker starts, improved idle quality, crisper throttle response, and higher RPM power; A direct bolt-in, plug-In replacement; Can work with an Accel, Mallory, Crane, Holley or MSD capacitive discharge ignition system; Special high temperature epoxy resists shock and vibration while increasing thermal conductivity; With Accel's limited 90-day warranty.

Fits the following 1985-1988 Buick Skyhawk submodels:

• 1985-1986: Custom; 4 Cyl 2.0L; "GAS, FI, VIN P"
• 1985-1986: Limited; 4 Cyl 1.8L; "GAS, FI, VIN O"

• 1985-1986: Limited; 4 Cyl 2.0L; "GAS, FI, VIN P"

• 1985-1986: T-Type; 4 Cyl 1.8L; "GAS, FI, Turbocharged, VIN J"

• 1985-1986: T-Type; 4 Cyl 1.8L; "GAS, FI, VIN O"

• 1986-1986: Custom; 4 Cyl 1.8L; "GAS, FI, VIN O"

• 1986-1986: Sport; 4 Cyl 1.8L; "GAS, FI, VIN O"

• 1986-1986: Sport; 4 Cyl 2.0L; "GAS, FI, VIN P"

• 1987-1987: Custom; 4 Cyl 2.0L; "GAS, FI, Turbocharged, VIN M"

• 1987-1987: Limited; 4 Cyl 2.0L; "GAS, FI, Turbocharged, VIN M"

• 1987-1987: Limited; 4 Cyl 2.0L; "GAS, FI, VIN 1"

• 1987-1987: Limited; 4 Cyl 2.0L; "GAS, FI, VIN K"

• 1987-1987: Sport; 4 Cyl 2.0L; "GAS, FI, Turbocharged, VIN M"

• 1987-1987: Sport; 4 Cyl 2.0L; "GAS, FI, VIN 1"

• 1987-1987: Sport; 4 Cyl 2.0L; "GAS, FI, VIN K"

• 1987-1988: Custom; 4 Cyl 2.0L; "GAS, FI, VIN 1"

• 1987-1988: Custom; 4 Cyl 2.0L; "GAS, FI, VIN K"

• 1988-1988: SE; 4 Cyl 2.0L; "GAS, FI, VIN 1"

• 1988-1988: SE; 4 Cyl 2.0L; "GAS, FI, VIN K"

Fits 17 more submodels. (Show all) Show less info

ACCEL HEI IN-CAP SUPER COIL -- 0.5 Ohms Primary Resistance, 8.6 k Secondary Resistance, 80:1 Turns Ratio, 45,000 Volts Maximum Voltage, Engineered For Higher Energy Output Resulting In Quicker Starting, Improved Idle Quality, Crisper Throttle Response, And More RPM Power, Offers 14% Peak Increase In Energy And 18% Peak Increase In Voltage Over OE, Designed With Finned Injection Molded Coil Cover With Integral Wire Hold Down Ring That Provides Efficient Cooling For Long Life And Great Looks, Features Special Temperature Epoxy That Resists Shock And Vibration While Increasing Thermal Conductivity, Compatible With Both Original HEI Ignition Systems And Later Model Computer Controlled HEI Systems, Does Not Require Removal Or Re-Timing Of Distributor, Has Red And White Primary Wire, Comes Complete With Simplified Ground Strap, Mounting Screws, Silicone Coil Gasket, And Carbon Contact Brush/Spring, With Accel's Limited 90-Day Warranty

Fits the following 1975-1980 Buick Skyhawk submodels:

• 1975-1977: Base; 6 Cyl 3.8L; "GAS, CARB, VIN C"
• 1975-1977: S; 6 Cyl 3.8L; "GAS, CARB, VIN C"

• 1978-1978: Base; 6 Cyl 3.8L; "GAS, CARB, VIN 2"

• 1978-1978: S; 6 Cyl 3.8L; "GAS, CARB, VIN 2"

• 1978-1980: Base; 6 Cyl 3.8L; "GAS, CARB, VIN A"

• 1978-1980: S; 6 Cyl 3.8L; "GAS, CARB, VIN A"

• 1979-1980: Road Hawk; 6 Cyl 3.8L; "GAS, CARB, VIN A"

• 1980-1980: Designers' Accent Edition; 6 Cyl 3.8L; "GAS, CARB, VIN A"

Fits 6 more submodels. (Show all) Show less info

ACCEL BRUTE THUNDER HEI IN-CAP SUPER COIL -- 0.3 Ohms Primary Resistance, 8.8 k Ohms Secondary Resistance, 134:1 Turns Ratio, 48,000 Volts Maximum Voltage, 208 Millijoules Energy At Idle, 46 Millijoules Energy At 3,600 RPM, Engineered With Enhanced, Low Resistance, Low-Inductance, And High-Turns Ratio Windings, Offers 56% Peak Increase In Energy And 29% Peak Increase Over OE, Features Special Temperature Epoxy That Resists Even The Unforgiving Shock, Vibration, And High Temperatures Of Street/Strip, Race, And Off-Road Use, Compatible With Both Original HEI Ignition Systems And Later Model Computer Controlled HEIO Systems, Does Not Require Removal Or Re-Timing Of Distributor, Also Works With Accel, Mallory, Crane, Holley, Or MSD Capacitive Discharge Ignition Systems, Has Red And White Primary Wire, Comes Complete With Simplified Ground Strap, Mounting Screws, Silicone Coil Gasket, Low Ohm Contact Brush/Spring, And An Accel Tan Coil Cover, With Accel's Limited 90-Day Warranty

Fits the following 1975-1980 Buick Skyhawk submodels:

• 1975-1977: Base; 6 Cyl 3.8L; "GAS, CARB, VIN C"
• 1975-1977: S; 6 Cyl 3.8L; "GAS, CARB, VIN C"

• 1978-1978: Base; 6 Cyl 3.8L; "GAS, CARB, VIN 2"

• 1978-1978: S; 6 Cyl 3.8L; "GAS, CARB, VIN 2"

• 1978-1980: Base; 6 Cyl 3.8L; "GAS, CARB, VIN A"

• 1978-1980: S; 6 Cyl 3.8L; "GAS, CARB, VIN A"

• 1979-1980: Road Hawk; 6 Cyl 3.8L; "GAS, CARB, VIN A"

• 1980-1980: Designers' Accent Edition; 6 Cyl 3.8L; "GAS, CARB, VIN A"

Fits 6 more submodels. (Show all) Show less info

AC DELCO IGNITION COIL -- Offers maximum protection in harsh operating environments; Designed with corrosion-protected laminations; Engineered to high standards and tested under extreme conditions to exceed OE specifications; Delivers high quality and dependable performance; Direct replacement part for OE number 10472401.

Fits the following 1987-1989 Buick Skyhawk submodels:

• 1987-1987: Limited; 4 Cyl 2.0L; "GAS, FI, VIN 1"
• 1987-1987: Sport; 4 Cyl 2.0L; "GAS, FI, VIN 1"

• 1987-1989: Custom; 4 Cyl 2.0L; "GAS, FI, VIN 1"

• 1988-1989: SE; 4 Cyl 2.0L; "GAS, FI, VIN 1"

Fits 2 more submodels. (Show all) Show less info

AC DELCO OE REPLACEMENT IGNITION COIL -- Offers Maximum Protection In Harsh Operating Environments, Designed With Corrosion-Protected Laminations, Engineered To High Standards And Tested Under Extreme Conditions To Exceed OE Specifications, Delivers High Quality And Dependable Performance, Direct Replacement Part For OE Number 12498334

Fits the following 1985-1988 Buick Skyhawk submodels:

• 1985-1986: T-Type; 4 Cyl 1.8L; "GAS, FI, Turbocharged, VIN J"
• 1987-1987: Custom; 4 Cyl 2.0L; "GAS, FI, Turbocharged, VIN M"

• 1987-1987: Limited; 4 Cyl 2.0L; "GAS, FI, Turbocharged, VIN M"

• 1987-1987: Limited; 4 Cyl 2.0L; "GAS, FI, VIN K"

• 1987-1987: Sport; 4 Cyl 2.0L; "GAS, FI, Turbocharged, VIN M"

• 1987-1987: Sport; 4 Cyl 2.0L; "GAS, FI, VIN K"

• 1987-1988: Custom; 4 Cyl 2.0L; "GAS, FI, VIN K"

• 1988-1988: SE; 4 Cyl 2.0L; "GAS, FI, VIN K"

Fits 6 more submodels. (Show all) Show less info

AC DELCO, IGNITION COIL -- OEM Design Ignition Coil, A High Quality Direct Replacement Part Providing Exact Fit For Easy Installation And Reliable Operation, Direct Replacement Part For OE Number 12498336

Fits the following 1975-1980 Buick Skyhawk submodels:

• 1975-1978: Base; 6 Cyl 3.8L; "GAS, CARB, VIN C"
• 1975-1978: S; 6 Cyl 3.8L; "GAS, CARB, VIN C"

• 1978-1979: Base; 6 Cyl 3.8L; "GAS, CARB, VIN A"

• 1978-1980: S; 6 Cyl 3.8L; "GAS, CARB, VIN A"

• 1979-1979: Road Hawk; 6 Cyl 3.8L; "GAS, CARB, VIN A"

Fits 3 more submodels. (Show all) Show less info

AC DELCO, IGNITION COIL -- OEM Design Ignition Coil, A High Quality Direct Replacement Part Providing Exact Fit For Easy Installation And Reliable Operation, Direct Replacement Part For OE Number 1115317

Fits the following 1985-1986 Buick Skyhawk submodels:

• 1985-1986: Custom; 4 Cyl 2.0L;
• 1985-1986: Limited; 4 Cyl 2.0L;

• 1986-1986: Sport; 4 Cyl 2.0L;

Fits 1 more submodels. (Show all) Show less info

AC DELCO, IGNITION COIL -- OEM Design Ignition Coil, A High Quality Direct Replacement Part Providing Exact Fit For Easy Installation And Reliable Operation, Direct Replacement Part For OE Number 12498046

Fits the following 1982-1984 Buick Skyhawk submodels:

• 1982-1982: Custom; 4 Cyl 1.8L; "GAS, CARB, VIN G"
• 1982-1982: Limited; 4 Cyl 1.8L; "GAS, CARB, VIN G"

• 1982-1984: Custom; 4 Cyl 1.8L; "GAS, FI, VIN 0"

• 1982-1984: Limited; 4 Cyl 1.8L; "GAS, FI, VIN 0"

• 1983-1983: Custom; 4 Cyl 2.0L; "GAS, CARB, VIN B"

• 1983-1983: Limited; 4 Cyl 2.0L; "GAS, CARB, VIN B"

• 1983-1984: Custom; 4 Cyl 2.0L; "GAS, FI, VIN P"

• 1983-1984: Limited; 4 Cyl 2.0L; "GAS, FI, VIN P"

• 1983-1984: T-Type; 4 Cyl 1.8L; "GAS, FI, VIN 0"

Fits 7 more submodels. (Show all) Show less info

MSD BLASTER PERFORMANCE COIL, RED -- 0.450 ohms primary resistance, 85:1 turns ratio, 5.5 k ohms secondary resistance, 48,000 V maximum voltage, 7.0 mH inductance, 220 mA peak current, 250 uS spark duration, male/HEI wire attachment style, E-core style, square; Does not include mounting bracket, coil wire, and ballast resistor; Polyurethane internal construction; CARB certified for use in all 50 states; A great new replacement coil with factory style housing; A combination of the blaster coil experience with E-core coil efficiency; Has a unique turns ratio plus lower primary resistance than the stock coil; A bolt-in replacement coil with more voltage output that will work with stock ignition systems as well as MSD equipped cars and trucks; With MSD's limited 1-year warranty.

Fits the following 1982-1986 Buick Skyhawk submodels:

• 1982-1982: Custom; 4 Cyl 1.8L;
• 1982-1982: Limited; 4 Cyl 1.8L;

• 1983-1986: Custom; 4 Cyl 2.0L;

• 1983-1986: Limited; 4 Cyl 2.0L;

• 1986-1986: Sport; 4 Cyl 2.0L;

Fits 3 more submodels. (Show all) Show less info

MSD 2-TOWER COIL PACK -- Helps Burn The Fuel Mixture More Efficiently Resulting In A Smooth Idle And Improved Mid Range RPM Power, Features Bolt-In Coils With Improved Materials And Windings For A Stronger Spark, Coil Specifications Include 40,000V Maximum Voltage, 4.2 Inductance, 7.8K Ohms Secondary Resistance, 0.5 Ohms Primary Resistance And 80:1 Turns Ratio, OBD II Legal And CARB Approved, With MSD's Limited Warranty

Fits the following 1987-1989 Buick Skyhawk submodels:

• 1987-1987: Limited; 4 Cyl 2.0L;
• 1987-1987: Sport; 4 Cyl 2.0L;

• 1987-1989: Custom; 4 Cyl 2.0L;

• 1988-1989: SE; 4 Cyl 2.0L;

Fits 2 more submodels. (Show all) Show less info

Performance Coil, HEI Coil, In Distributor Cap Mounted Coil, OE Replacement Or Use With MSD Replacement Module Part# 8364 for Added Performance, CARB Approved For Use In All 50 States According To E.O. # D-40-37

Fits the following 1975-1977 Buick Skyhawk submodels:

• 1975-1977: Base; 6 Cyl 3.8L;
• 1975-1977: S; 6 Cyl 3.8L;

MALLORY HEI AND EST PERFORMANCE COIL, RED -- 0 to 5500 RPM, This High Performance Replacement Coil Increases The RPM Range Of 1985-Later Delco-Remy HEI Distributors With External Coil, For Use With Mallory HYFIRE Series Ignitions Systems Optimize Performance, With Mallory's 1-Year Limited Warranty

Fits the following 1977-1980 Buick Skyhawk submodels:

• 1977-1980: Base; 6 Cyl 3.8L;
• 1977-1980: S; 6 Cyl 3.8L;

• 1979-1980: Road Hawk; 6 Cyl 3.8L;

• 1980-1980: Designers' Accent Edition; 6 Cyl 3.8L;

Fits 2 more submodels. (Show all) Show less info