Jeep Comanche Ignition Coil

IGNITION COIL -- A high quality, direct fit OE replacement ignition coil; Covered by a 1-year unlimited mileage warranty.

Fits the following 1991-1992 Jeep Comanche submodels:

• 1991-1991: Pioneer; 4 Cyl 2.5L; "GAS, FI, VIN P"
• 1991-1992: Base; 4 Cyl 2.5L; "GAS, FI, VIN P"

• 1991-1992: Base; 6 Cyl 4.0L; "GAS, FI, VIN S"

• 1991-1992: Eliminator; 6 Cyl 4.0L; "GAS, FI, VIN S"

• 1991-1992: Pioneer; 6 Cyl 4.0L; "GAS, FI, VIN S"

Fits 3 more submodels. (Show all) Show less info

ACCEL SUPER COIL, BLACK/YELLOW -- Male/HEI wire attachment style, C-core style, square, 1.0 Ohms primary resistance, 12.7 k Ohms secondary resistance, 42,000 volts maximum voltage, 76:1 turns ratio; Offers significant peak increases of 34 percent in energy, 17 percent in current, 23 percent in arc duration and 36 percent in dwell against OE; Features brass contact that increases energy transfer and resists corrosion better than aluminum; Epoxy internal construction; Engineered with optimized low resistance; High turns ratio windings around an m36 high silicone magnetic steel E-core; Delivers quicker starts, improved idle quality, crisper throttle response and higher rpm power; Direct bolt-in, plug-in replacement; Can work with an Accel, Mallory, Crane, Holley or MSD capacitive discharge ignition system; Special high temperature epoxy resists shock and vibration while increasing thermal conductivity; Does not include mounting bracket, coil wire and ballast resistor; With Accel's limited 90-day warranty.

Fits the following 1991-1992 Jeep Comanche submodels:

• 1991-1991: Pioneer; 4 Cyl 2.5L; "GAS, FI, VIN P"
• 1991-1992: Base; 4 Cyl 2.5L; "GAS, FI, VIN P"

• 1991-1992: Base; 6 Cyl 4.0L; "GAS, FI, VIN S"

• 1991-1992: Eliminator; 6 Cyl 4.0L; "GAS, FI, VIN S"

• 1991-1992: Pioneer; 6 Cyl 4.0L; "GAS, FI, VIN S"

Fits 3 more submodels. (Show all) Show less info

ACCEL SUPERSTOCK POINTS COIL, YELLOW -- Female/socket wire attachment style, canister style, round, 1.4 ohms primary resistance, 9.2 k ohms secondary resistance, 42,000 volts maximum voltage, 94:1 turns ratio; Oil-filled internal construction; Excellent high performance replacement part; Re-engineered windings for even higher energy output resulting in quicker starting; Improved throttle response and more high rpm power; Designed to work with both points style and breakerless electronic ignition systems; Special crimped and soldered internal connections ensure positive contacts; Heavy duty black alkyd tower provides flashover protection to primary terminals; Legal for sale in California; Does not include mounting bracket, coil wire and ballast resistor; With Accel's limited 90-day warranty.

Fits the following 1986-1988 Jeep Comanche submodels:

• 1986-1986: Custom; 4 Cyl 2.5L; "GAS, FI, VIN H"
• 1986-1986: X; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1986-1986: XLS; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Base; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Chief; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Laredo; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Pioneer; 4 Cyl 2.5L; "GAS, FI, VIN H"

Fits 5 more submodels. (Show all) Show less info

ACCEL HEI REMOTE MOUNT SUPER COIL, BLACK/YELLOW -- Male/HEI wire attachment style, E-core style, square, 0.3 ohms primary resistance, 48,000 V maximum voltage, 134:1 turns ratio, 8.8 k ohms secondary resistance; Does not include mounting bracket, coil wire and ballast resistor; Offers significant peak increases of 36 percent in energy and 27 percent in voltage against OE; Features brass contact that increases energy transfer and resists corrosion better than aluminum; Epoxy internal construction; Engineered with optimized low resistance; High turns ratio windings around an M36 high Silicone magnetic steel E-core; Delivers quicker starts, improved idle quality, crisper throttle response, and higher RPM power; A direct bolt-in, plug-In replacement; Can work with an Accel, Mallory, Crane, Holley or MSD capacitive discharge ignition system; Special high temperature epoxy resists shock and vibration while increasing thermal conductivity; With Accel's limited 90-day warranty.

Fits the following 1986 Jeep Comanche submodels:

• 1986-1986: Custom; 6 Cyl 2.8L; "GAS, CARB, VIN W"
• 1986-1986: X; 6 Cyl 2.8L; "GAS, CARB, VIN W"

• 1986-1986: XLS; 6 Cyl 2.8L; "GAS, CARB, VIN W"

Fits 1 more submodels. (Show all) Show less info

ACCEL SUPER COIL, YELLOW/BROWN -- Female/Socket Wire Attachment Style, Canister Style, Rectangular, 0.7 Ohms Primary Resistance, Oil-Filled Internal Construction, 45,000 V Maximum Voltage, 70:1 Turns Ratio, 11.8 k Ohms Secondary Resistance, Engineered For Faster Rise Time, Longer Spark Duration, And Increased Performance, Features Unique Design With Premium Grade Wire, Special Low Resistance, And High Turns Ratio Windings, Designed With Oversized Molded Cases With Integral Cooling Fin And High Capacity Oil Filled Construction That Provides High Thermal Conductivity Ensuring Cool Operation And Long Life, Produces Higher Spark Energy With Breakerless Electronic Ignition Systems, Its Extra Tall Tan Alkyd Tower And Integral Voltage Dam Eliminates Flashover To Primary Terminal, Comes Complete With Mounting Hardware And 0.85 Ohms Ballast Resistor Effective Up To 6,500 RPM, Includes Mounting Bracket And Ballast Resistor, No Coil Wire Included, With Accel's Limited 90-Day Warranty

Fits the following 1986-1988 Jeep Comanche submodels:

• 1986-1986: Custom; 4 Cyl 2.5L; "GAS, FI, VIN H"
• 1986-1986: X; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1986-1986: XLS; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Base; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Chief; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Laredo; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Pioneer; 4 Cyl 2.5L; "GAS, FI, VIN H"

Fits 5 more submodels. (Show all) Show less info

ACCEL SUPERSTOCK POINTS COIL, CHROME -- Female/Socket Wire Attachment Style, Canister Style, Round, 1.4 Ohms Primary Resistance, Oil-Filled Internal Construction, 42,000 V Maximum Voltage, 94:1 Turns Ratio, 9.2 k Ohms Secondary Resistance, Excellent High Performance Replacement Part, Re-Engineered Windings For Even Higher Energy Output Resulting In Quicker Starting, Improved Throttle Response And More High RPM Power, Designed To Work With Both Points Style And Breakerless Electronic Ignition Systems, Special Crimped And Soldered Internal Connections Ensure Positive Contacts, Heavy Duty Black Alkyd Tower Provides Flashover Protection To Primary Terminals, Legal For Sale In California, Does Not Include Mounting Bracket, Coil Wire, And Ballast Resistor, With Accel's Limited 90-Day Warranty

Fits the following 1986-1988 Jeep Comanche submodels:

• 1986-1986: Custom; 4 Cyl 2.5L; "GAS, FI, VIN H"
• 1986-1986: X; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1986-1986: XLS; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Base; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Chief; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Laredo; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Pioneer; 4 Cyl 2.5L; "GAS, FI, VIN H"

Fits 5 more submodels. (Show all) Show less info

ACCEL STREET/STRIP CANISTER DURA-SPARK STYLE RACING COIL, GLOSS BLACK CAN FINISH -- 1.4 Ohms Primary Resistance, 7.3 k Ohms Secondary Resistance, 65:1 Turns Ratio, 45,000 Volts Maximum Voltage, Engineered With Special Windings For Maximum Energy Output Resulting In Greatly Increased RPM Power, Quicker Starting, And Improved Throttle Response, Features Special Crimped And Soldered Internal Contacts, Special Spring Load Windings, And Silica Steel Core That Eliminate Vibration-Induced Failures, With High Performance Tan Alkyd Tower That Provide Flashover Protection To Primary Terminals, An Excellent High Performance Replacement For Vehicles Equipped With Dura-Spark Ignition Systems And Canister Type Oil Filled Can Coil, Also Works With Accel, Mallory, Crane, Holley, Or MSD Capacitive Discharge Ignition Systems, Effective Up To 8,500 RPM, With Accel's Limited 90-Day Warranty

Fits the following 1986-1988 Jeep Comanche submodels:

• 1986-1986: Custom; 4 Cyl 2.5L; "GAS, FI, VIN H"
• 1986-1986: X; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1986-1986: XLS; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Base; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Chief; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Laredo; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Pioneer; 4 Cyl 2.5L; "GAS, FI, VIN H"

Fits 5 more submodels. (Show all) Show less info

ACCEL SUPERSTOCK HIGH VIBRATION COIL, BLACK -- 0.6 Ohms Primary Resistance, 9.5K Ohms Secondary Resistance, 123:1 Turns Ratio, 45000V Maximum Voltage, An Excellent Choice For High Performance, Heavy-Duty, And Off-Road Use, Features A Canister-Style Coil That Is Completely Encased In High-Temperature Epoxy For Protection Against Harsh Vibrations And Impacts, Engineered With Special Low Resistance And High Turns Ratio Windings To Produce Higher Energy Output, Heavy Duty Black Alkyd Tower Provides Flashover Protection To Primary Terminals, Can Be Mounted In Any Orientation, With Accel's Limited 90-Day Warranty

Fits the following 1986-1988 Jeep Comanche submodels:

• 1986-1986: Custom; 4 Cyl 2.5L; "GAS, FI, VIN H"
• 1986-1986: X; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1986-1986: XLS; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Base; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Chief; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Laredo; 4 Cyl 2.5L; "GAS, FI, VIN H"

• 1987-1988: Pioneer; 4 Cyl 2.5L; "GAS, FI, VIN H"

Fits 5 more submodels. (Show all) Show less info

AC DELCO OE REPLACEMENT IGNITION COIL -- Offers Maximum Protection In Harsh Operating Environments, Designed With Corrosion-Protected Laminations, Engineered To High Standards And Tested Under Extreme Conditions To Exceed OE Specifications, Delivers High Quality And Dependable Performance, Direct Replacement Part For OE Number 12498334

Fits the following 1986 Jeep Comanche submodels:

• 1986-1986: Custom; 6 Cyl 2.8L; "GAS, CARB, VIN W"
• 1986-1986: X; 6 Cyl 2.8L; "GAS, CARB, VIN W"

• 1986-1986: XLS; 6 Cyl 2.8L; "GAS, CARB, VIN W"

Fits 1 more submodels. (Show all) Show less info

MSD REPLACEMENT COIL, 2 PIN CONNECTOR, RED -- 3.962 in. Length x 1.757 in. Width x 2.968 in. Height, Male/HEI Wire Attachment Style, E-Core Style, Square, 1.2 Ohms Primary Resistance, Epoxy Internal Construction, 35,000 V Maximum Voltage, 70:1 Turns Ratio, 13.7 k Ohms Secondary Resistance, 8.0 mH Inductance, A New Bolt-In Coil Designed With Improved Materials And Windings To Produce A Stronger Output, Improved Spark Helps Burn The Fuel Mixture Efficiently Resulting In A Smooth Idle And Improved Mid Range RPM Power, Delivers A Strong Spark And Will Connect To The Factory Wiring, ODB II Legal And CARB Approved, Does Not Include Mounting Bracket, Coil Wire, And Ballast Resistor, With MSD's Limited 1-Year Warranty

Fits the following 1992 Jeep Comanche submodels:

• 1992-1992: Base; 4 Cyl 2.5L;
• 1992-1992: Base; 6 Cyl 4.0L;

• 1992-1992: Eliminator; 6 Cyl 4.0L;

• 1992-1992: Pioneer; 6 Cyl 4.0L;

Fits 2 more submodels. (Show all) Show less info

Fits the following 1986-1990 Jeep Comanche submodels:

• 1986-1986: Custom; 4 Cyl 2.5L;
• 1986-1986: X; 4 Cyl 2.5L;

• 1986-1986: XLS; 4 Cyl 2.5L;

• 1987-1988: Base; 4 Cyl 2.5L;

• 1987-1988: Base; 6 Cyl 4.0L;

• 1987-1988: Chief; 4 Cyl 2.5L;

• 1987-1988: Chief; 6 Cyl 4.0L;

• 1987-1988: Laredo; 4 Cyl 2.5L;

• 1987-1988: Laredo; 6 Cyl 4.0L;

• 1987-1988: Pioneer; 4 Cyl 2.5L;

• 1987-1988: Pioneer; 6 Cyl 4.0L;

• 1988-1988: Eliminator; 6 Cyl 4.0L;

• 1989-1990: All Submodels; All Engines;

• 1990-1990: Base; All Engines;

• 1990-1990: Pioneer; All Engines;

Fits 13 more submodels. (Show all) Show less info

COIL, OEM REPLACEMENT IGNITION COIL -- OEM Quality And Fit For Dependable Service

Fits the following 1991-1992 Jeep Comanche submodels:

• 1991-1991: Pioneer; 4 Cyl 2.5L; "FI"
• 1991-1992: Base; 4 Cyl 2.5L; "FI"

• 1991-1992: Base; 6 Cyl 4.0L;

• 1991-1992: Eliminator; 6 Cyl 4.0L;

• 1991-1992: Pioneer; 6 Cyl 4.0L;

Fits 3 more submodels. (Show all) Show less info

COIL, OEM REPLACEMENT IGNITION COIL -- OEM Quality And Fit For Dependable Service

Fits the following 1986-1990 Jeep Comanche submodels:

• 1986-1986: Custom; 4 Cyl 2.5L; "FI"
• 1986-1986: X; 4 Cyl 2.5L; "FI"

• 1986-1986: XLS; 4 Cyl 2.5L; "FI"

• 1987-1988: Chief; 4 Cyl 2.5L; "FI"

• 1987-1988: Chief; 6 Cyl 4.0L;

• 1987-1988: Laredo; 4 Cyl 2.5L; "FI"

• 1987-1988: Laredo; 6 Cyl 4.0L;

• 1987-1990: Base; 4 Cyl 2.5L; "FI"

• 1987-1990: Base; 6 Cyl 4.0L;

• 1987-1990: Pioneer; 4 Cyl 2.5L; "FI"

• 1987-1990: Pioneer; 6 Cyl 4.0L;

• 1988-1990: Eliminator; 6 Cyl 4.0L;

Fits 10 more submodels. (Show all) Show less info

COIL, OEM REPLACEMENT IGNITION COIL -- OEM Quality And Fit For Dependable Service

Fits the following 1986 Jeep Comanche submodels:

• 1986-1986: Custom; 4 Cyl 2.5L;
• 1986-1986: X; 4 Cyl 2.5L;

• 1986-1986: XLS; 4 Cyl 2.5L;

Fits 1 more submodels. (Show all) Show less info