Dodge Ram 2500 Ignition Module

Mallory FireStorm Street Ignition Systems

Developed by racers and performance enthusiasts, Mallory Ignition has been firing up the automotive market with race-proven performance products for over decades. Mallory Ignition products are guaranteed to perform and deliver serious power, quality, reliability, and value for customers’ performance and custom needs.

Experience power, precision, and control like never before with Mallory FireStorm Street Ignition System. The integrated intelligence of the FireStorm systems provides real-time tuning capabilities and 3D timing maps, individual cylinder timing control, and boost retard thru laptop connection. Get ready to amp up the power with an innovative level of performance, creating your some thunder on the street or strip with Mallory FireStorm Street ignition systems.

Mallory FireStorm Street Ignition Systems Features:

• 20 degrees of multi-spark duration
• 1/10th of 1 degree at 10,000 rpm precision
• 12-18 V requirement to create sparking power of 150mJ with 550 V of utmost output

Fits the following 2008-2008 Dodge Ram 2500 submodels:

• 2008-2008: Laramie; 8 Cyl 5.7L;
• 2008-2008: Power Wagon; 8 Cyl 5.7L;

• 2008-2008: SLT; 8 Cyl 5.7L;

• 2008-2008: ST; 8 Cyl 5.7L;

• 2008-2008: SXT; 8 Cyl 5.7L;

Fits 3 more submodels. (Show all) Show less info

DISTRIBUTOR PICK-UP ASSEMBLY, SOLD INDIVIDUALLY -- 3 terminals; A high quality, direct fit OE replacement distributor pick-up assembly; With 3-year or 36,000-mile Standard limited warranty.

Fits the following 1998-2003 Dodge Ram 2500 submodels:

• 2003-2003: Base; 8 Cyl 5.7L;
• 2002-2002: Base; 8 Cyl 5.9L;

• 1998-2001: Base; 8 Cyl 5.9L; "GAS"

Fits 1 more submodels. (Show all) Show less info

MSD DIS-2 IGNITION CONTROL UNIT -- 170 mJ per spark, 470 V primary voltage, 43,000 V secondary voltage, 20 degree crankshaft rotation spark series duration, 14,000 rpm with 14.4 V rpm range, 10-18 V negative ground voltage required, 5.3 amps per 10,000 rpm current draw, 3 lbs. W, 9.5 x 4.5 x 2.2 in. size; Increases output light up fuel mixtures even under extreme cylinder pressures.

Fits the following 2002-2003 Dodge Ram 2500 submodels:

• 2002-2003: Base; 10 Cyl 8.0L;

AEM FUEL/IGNITION CONTROLLER -- A PC-programmable piggy-back controller that allows users to retard timing and add fuel to virtually any engine, even on variable cam timing engines; Can decrease pulse-width, allowing larger aftermarket injectors while maintaining proper air/fuel ratios; Runs in conjunction with factory ECU without affecting CAN-BUS; Features 8 injector channels, advanced injector load simulation and filtering, 5 timing channels for camshaft and crankshaft, high and low voltage selectable MAG-driver outputs, TPS input, onboard MAP sensor, MAP and MAF 0-5V intercept, frequency based flow meter support, speedometer recalibrator, oxygen sensor remapping, external AFR input, 2 generic 0-5V remappers, boost controller, IAT logging output, PC data logging, 2 Mb internal logging memory, and VTEC output, control, and +12V switched output; No emissions compliance, for offroad use only; With 12-month AEM limited warranty.

Fits the following 2006-2008 Dodge Ram 2500 submodels:

• 2008-2008: SXT; 8 Cyl 5.7L; "VIN D"
• 2006-2008: Laramie; 8 Cyl 5.7L; "VIN D"

• 2006-2008: Power Wagon; 8 Cyl 5.7L; "VIN D"

• 2006-2008: SLT; 8 Cyl 5.7L; "VIN D"

• 2006-2008: ST; 8 Cyl 5.7L; "VIN D"

• 2006-2007: Sport; 8 Cyl 5.7L; "VIN D"

• 2006-2007: TRX4; 8 Cyl 5.7L; "VIN D"

Fits 5 more submodels. (Show all) Show less info