Chevy Beretta Ignition Wire

Bosch Ignition Wire Set

Bosch ignition leads incorporate the latest inductive core technology. The specialised construction of stainless steel wire winding wrapped around a Kevlar® reinforced aramid core, filters the RF interference by restricting the AC component. This allows DC energy to flow easily through the resistance of the spiral winding which has a lower resistance than normal resistive leads.

The overall construction of the cable core, spark plug boots and outer jacket make Bosch ignition leads suitable for use with gasoline, LPG or alternative fuel engines.

• Latest cable technology using inductive core for better performance
• 100% silicone construction inner and outer insulating sheathing
• Class F cables with superior heat resistance up to 250°C
• Ensures high performance whilst maintaining peak voltage to the spark plugs
• Exceeds International Standard ISO3808:2002(E) for High Voltage Ignition Cables
• Excellent RFI suppression and electrical conductivity properties
• High liner & tensile strength fiber glass reinforcing braid for longer life
• Resistance to aggressive under bonnet conditions of fuels and oils

Warranty Information: 5 year - 50,000 mile limited warranty against defects in material and workmanship.

---

Fits the following 1994-1996 Chevrolet Beretta submodels:

• 1994-1996: Base; 6 Cyl 3.1L;
• 1994-1996: Z26; 6 Cyl 3.1L;

PRESTOLITE PROCONNECT SPARK PLUG WIRES, SET OF 4

Prestolite ProConnect Spark Plug Wire offers superior fiberglass, silicone, and Kevlar construction for excellent conductivity. High temperature performance, EMI/RFI noise suppression, and durability. Wiring systems are specially designed to meet customer-established performance, reliability, and cost specifications.

Features:

• OE conductor and OE/OES specified insulators, nipples, and terminals
• Superior fiberglass, silicone, and Kevlar construction for excellent conductivity, high temperature performance, EMI/RFI noise suppression, and durability
• Estimated to withstand temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit
• Click-in-place end caps design that match to OE end caps for quick installation and a tight fit without adjustment that gives a perfect fit
• Ignition cable and wiring systems specially designed to meet customer-established performance, reliability, and cost specifications
• Electronic protection systems from electrical or magnetic interference
• Resistant to heat, cold, and chemical attack

Allows for all weather starting. Meets SAE j2031 class E specifications. Won't crack or shrink and carries a maximum voltage.

Fits the following 1987-1991 Chevrolet Beretta submodels:

• 1990-1991: Base; 4 Cyl 2.2L;
• 1990-1990: Indianapolis 500 Pace Car; 4 Cyl 2.2L;

• 1987-1989: Base; 4 Cyl 2.0L;

• 1987-1988: GT; 4 Cyl 2.0L;

Fits 2 more submodels. (Show all) Show less info

DENSO FIRST TIME FIT IGNITION WIRES, SET OF 6

Denso First Time Fit Ignition Wires are identical in form, fit, color, and performance to the factory-installed wire sets, and constructed to meet OE standards. Ferrite impregnated layers, silicone insulation for superior dielectric and heat performance, and high temperature Class E silicon jacket to withstand chemicals, moisture, and temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit.

Specifications:

• 7 mm diameter

Features:

• Pre-cut wire to exact length with reinforcing member for added strength and terminal retention
• Passed tests covering everything from electrical properties to shrinkage to chemical resistance and accelerated life testing
• Identical OE end caps, carbon impregnated fiberglass core for superior conductivity, fiberglass braid for maximum strength, conductive silicone layer for high temperature performance, and EMI/RFI noise suppression

Easy installation.

Fits the following 1994-1996 Chevrolet Beretta submodels:

• 1994-1996: Base; 6 Cyl 3.1L; "VIN M"
• 1994-1996: Z26; 6 Cyl 3.1L; "VIN M"

TAYLOR CABLE CUSTOM-FIT SPIRO-PRO IGNITION WIRES, BLUE, SET OF 6

Taylor Cable Custom Fit Wire Set fits muscle cars, performance cars, sport compacts, and trucks. Custom fit wires provide extra boost on your engines through maximum firepower and non-stop heat protection.

Specifications:

• 90 degrees plug boot
• Socket ignition type

Features:

• 2-layer insulation made of 100 percent silicone with fiberglass reinforced jacket
• High conductive spiral wound core with stainless steel wire covered with fluorocarbon conductive material
• 350 ohms per foot resistance for more fire power to spark plugs
• 10 times less resistance than standard resistor core wires
• Eliminates radio frequency interference
• Wires terminated to specific lengths featuring Taylor Cable's exclusive 100 percent silicone low profile pro boots with vibration proof double spring locking spark plug terminals
• Withstand temperatures of up to 600 degrees Fahrenheit

Fits the following 1994-1996 Chevrolet Beretta submodels:

• 1994-1996: Base; 6 Cyl 3.1L;
• 1994-1996: Z26; 6 Cyl 3.1L;

AC DELCO IGNITION WIRES, SET OF 4

AC Delco Ignition Wires meet or exceed original equipment quality specifications. Made from top-quality materials, precisely engineered and manufactured to provide everyday reliability and efficient performance.

Features:

• Constructed from top quality materials to help the engine run clean and longer
• Copper-core center electrode
• Engineered to high standards and tested under extreme conditions to exceed OE specifications
• Delivers high quality and dependable performance

Fits the following 1993-1995 Chevrolet Beretta submodels:

• 1993-1995: Base; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated, VIN 4"
• 1993-1993: GT; 4 Cyl 2.2L; "GAS, FI, Naturally Aspirated, VIN 4"

MSD SUPER CONDUCTOR SPARK PLUG WIRES, RED, SET OF 4

MSD Super Conductor Spark Plug Wires ultimate performance provides extreme low resistance combined with the ability to suppress high EMI. Made of DuPont Kevlar conductor for increased tensile strength and durable outer sleeve for resistance to high heat or abrasion.

Specifications:

• 8.5 mm diameter
• Two-in-one
• Non-assembled
• RFI suppression
• Male/HEI and female/socket distributor terminal ends
• Eight multi-angle spark plug boot ends
• Gray distributor boot and spark plug boot
• Silicone distributor boot and spark plug boot material
• Spiral core conductor style

Features:

• Ferro-magnetic impregnated core that creates an effective EMI choke
• DuPont Kevlar material conductor for increased tensile strength and durable outer sleeve for resistance to high heat or abrasion
• Tough and high heat sleeve design that provides excellent abrasion protection
• Dual crimp terminals provide the strongest connections to the wire and lock to the spark plug terminal

Terminals for engines with early type socket and late type HEI spark plug top distributor caps.

Fits the following 1987-1993 Chevrolet Beretta submodels:

• 1992-1993: GT; 4 Cyl 2.2L;
• 1990-1993: Base; 4 Cyl 2.2L;

• 1990-1993: GTZ; 4 Cyl 2.3L;

• 1990-1990: Indianapolis 500 Pace Car; 4 Cyl 2.2L;

• 1990-1990: Indianapolis 500 Pace Car; 4 Cyl 2.3L;

• 1987-1989: Base; 4 Cyl 2.0L;

• 1987-1988: GT; 4 Cyl 2.0L;

Fits 5 more submodels. (Show all) Show less info

ACCEL GRAPHITE SUPPRESSION SPARK PLUG WIRES, YELLOW, SET OF 4

Accel Graphite Suppression Spark Plug Wire Kit offers an ultra high temperature barrier that acts as a heat mirror reflecting the infra-red energy or heat ay from the spark plug boot. Engineered with an ultra high temperature double silicone wire rated at 600 degrees Fahrenheit peak.

Specifications:

• 8.8 mm diameter
• Non-assembled
• RFI suppression
• Silicone distributor and spark plug boot material
• Black distributor boot color
• Orange spark plug boot color
• Male/HEI distributor terminal ends
• Four multi-angle spark plug boot ends
• Stainless steel alloy conductor style
• Includes coil wire

Features:

• Universal fit design
• Fiberglass braiding and Kevlar stranded inner core to fit perfectly
• High stresses, heavy duty, and super or turbo charged engines
• Heat reflective coating that is highly resistant to rubbing, flaking, and peeling off

Does not include coil wire.

Fits the following 1987-1993 Chevrolet Beretta submodels:

• 1992-1993: GT; 4 Cyl 2.2L;
• 1990-1993: Base; 4 Cyl 2.2L;

• 1990-1993: GTZ; 4 Cyl 2.3L;

• 1990-1990: Indianapolis 500 Pace Car; 4 Cyl 2.2L;

• 1990-1990: Indianapolis 500 Pace Car; 4 Cyl 2.3L;

• 1987-1989: Base; 4 Cyl 2.0L;

• 1987-1988: GT; 4 Cyl 2.0L;

Fits 5 more submodels. (Show all) Show less info

STANDARD SPARK PLUG WIRES, BLACK, SET OF 6

Standard Spark Plug Wires are engineered with silicone outer jacket to match the original that provides superior protection against severe under-hood operating environment. Silicone rubber provides unsurpassed heat resistance and eliminates burn-out for a tougher output.

Specifications:

• Assembled
• RFI suppression
• Stock distributor terminal ends
• Silicone jacket material
• Stock spark plug boot ends
• Spiral core conductor style

Features:

• Aramid fibers provide maximum tensile strength preventing breaks and hot spots
• Fiberglass braid add to the wire's strength while increasing overall flexibility
• EPDM rubber insulation is the finest insulating material available to protect against voltage leaks
• Graphite impregnated latex, a conductive material with calibrated resistance to prevent radio frequency interference

Does not include coil wire.

Fits the following 1989-1993 Chevrolet Beretta submodels:

• 1991-1993: GTZ; 6 Cyl 3.1L;
• 1990-1993: Base; 6 Cyl 3.1L;

• 1990-1993: GT; 6 Cyl 3.1L;

• 1990-1990: Indianapolis 500 Pace Car; 6 Cyl 3.1L;

• 1989-1989: Base; 6 Cyl 2.8L;

• 1989-1989: GT; 6 Cyl 2.8L;

Fits 4 more submodels. (Show all) Show less info

GRANATELLI MPG PLUS SPARK PLUG WIRES, SET OF 4

Granatelli MPG Plus Spark Plug Wire increases power to the spark plug up to 400 percent over stock for more power and better gas mileage. Provides faster engine startup, smoother running engine, and boosts horsepower and torque.

Specifications:

• 8 mm diameter
• 0 ohm resistance

Features:

• Solid stainless connector cable with stainless snap lock spark plug connectors
• Fiberglass-reinforced braid resists temperatures up to 500 degrees
• Unique EMI/RMI protection ring that prevents stereo noise and no RFI/EMI interference
• Patented design works with any fuel injection
• Provides necessary pieces for a complete installation

Ideal for use with aftermarket headers and turbocharger systems.

Fits the following 1987-1991 Chevrolet Beretta submodels:

• 1987-1991: All Submodels; All Engines;

DELPHI SPARK PLUG WIRES, SET OF 4

A high quality, OE replacement spark plug wire set.

Fits the following 1987-1991 Chevrolet Beretta submodels:

• 1991-1991: Base; 4 Cyl 2.2L; "VIN G"
• 1990-1990: Indianapolis 500 Pace Car; 4 Cyl 2.2L; "VIN G"

• 1987-1989: Base; 4 Cyl 2.0L; "VIN 1"

• 1987-1988: GT; 4 Cyl 2.0L; "VIN 1"

Fits 2 more submodels. (Show all) Show less info

NOLOGY HOTWIRES IGNITION WIRES, BLUE, SET OF 4

Nology Hotwires Ignition Wire utilizes the highest quality silicone and OE terminals to guarantee high performance reliability and perfect fit. Uses spiral-core technology with 300 ohms per foot resistance eliminating radio interference.

Features:

• Hotter spark and OBD II compatible
• Built-in capacitor design creates a spark 300 times more powerful than OE wires
• Increases in torque, fuel mileage, horsepower up to 5 percent that is smog legal, and reduces emission
• Faster acceleration, higher top speed, easier start-ups, precise ignition timing, and no plug fouling

Ideal for engines with turbochargers and headers with high-temperature silicone construction.

Fits the following 1987-1996 Chevrolet Beretta submodels:

• 1987-1996: All Submodels; All Engines;