Daihatsu Ignition Wire Set

Bosch Ignition Wire Set

Bosch ignition leads incorporate the latest inductive core technology. The specialised construction of stainless steel wire winding wrapped around a Kevlar® reinforced aramid core, filters the RF interference by restricting the AC component. This allows DC energy to flow easily through the resistance of the spiral winding which has a lower resistance than normal resistive leads.

The overall construction of the cable core, spark plug boots and outer jacket make Bosch ignition leads suitable for use with gasoline, LPG or alternative fuel engines.

• Latest cable technology using inductive core for better performance
• 100% silicone construction inner and outer insulating sheathing
• Class F cables with superior heat resistance up to 250°C
• Ensures high performance whilst maintaining peak voltage to the spark plugs
• Exceeds International Standard ISO3808:2002(E) for High Voltage Ignition Cables
• Excellent RFI suppression and electrical conductivity properties
• High liner & tensile strength fiber glass reinforcing braid for longer life
• Resistance to aggressive under bonnet conditions of fuels and oils

Warranty Information: 5 year - 50,000 mile limited warranty against defects in material and workmanship.

---

Fits the following 1990-1992 Daihatsu Rocky submodels:

• 1990-1992: All Submodels; All Engines;

PRESTOLITE PROCONNECT SPARK PLUG WIRES, SET OF 3

Prestolite ProConnect Spark Plug Wire offers superior fiberglass, silicone, and Kevlar construction for excellent conductivity. High temperature performance, EMI/RFI noise suppression, and durability. Wiring systems are specially designed to meet customer-established performance, reliability, and cost specifications.

Features:

• OE conductor and OE/OES specified insulators, nipples, and terminals
• Superior fiberglass, silicone, and Kevlar construction for excellent conductivity, high temperature performance, EMI/RFI noise suppression, and durability
• Estimated to withstand temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit
• Click-in-place end caps design that match to OE end caps for quick installation and a tight fit without adjustment that gives a perfect fit
• Ignition cable and wiring systems specially designed to meet customer-established performance, reliability, and cost specifications
• Electronic protection systems from electrical or magnetic interference
• Resistant to heat, cold, and chemical attack

Allows for all weather starting. Meets SAE j2031 class E specifications. Won't crack or shrink and carries a maximum voltage.

Fits the following 1988-1992 Daihatsu Charade submodels:

• 1990-1992: SE; 3 Cyl 1.0L;
• 1990-1990: SX; 3 Cyl 1.0L;

• 1989-1989: CES; 3 Cyl 1.0L;

• 1988-1989: CLS; 3 Cyl 1.0L;

• 1988-1989: CLX; 3 Cyl 1.0L;

• 1988-1988: CSX; 3 Cyl 1.0L;

Fits 4 more submodels. (Show all) Show less info

DENSO FIRST TIME FIT IGNITION WIRE SET, 4 PIECES -- 7 mm; Identical in form, fit, color and performance to the factory-installed wire sets and constructed to meet OE standards; Each wire is pre-cut to exact length, with reinforcing member for added strength and terminal retention; Withstands temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit; Passed tests covering everything from electrical properties to shrinkage to chemical resistance and accelerated life testing; Features identical OE end caps, carbon impregnated fiberglass core for superior conductivity, fiberglass braid for maximum strength, conductive silicone layer for high temperature performance and EMI/RFI noise suppression, Ferrite impregnated layers, silicone insulation for superior dielectric and heat performance and high temperature Class E silicon jacket to withstand heat, cold, chemicals and moisture; Easy installation.

Fits the following 1988-1992 Daihatsu Charade submodels:

• 1990-1992: SE; 3 Cyl 1.0L;
• 1990-1990: SX; 3 Cyl 1.0L;

• 1989-1989: CES; 3 Cyl 1.0L;

• 1988-1989: CLS; 3 Cyl 1.0L;

• 1988-1989: CLX; 3 Cyl 1.0L;

• 1988-1988: CSX; 3 Cyl 1.0L;

Fits 4 more submodels. (Show all) Show less info

PREMIUM IGNITION WIRE SET - Original Equipment Replacement, Designed To Meet Or Exceed Original Manufacturers Specifications, Conductive Silicone Core Delivers Maximum Voltage

Fits the following 1988-1992 Daihatsu Charade submodels:

• 1990-1992: SE; 3 Cyl 1.0L;
• 1990-1990: SX; 3 Cyl 1.0L;

• 1989-1989: CES; 3 Cyl 1.0L;

• 1988-1989: CLS; 3 Cyl 1.0L;

• 1988-1989: CLX; 3 Cyl 1.0L;

• 1988-1988: CSX; 3 Cyl 1.0L;

Fits 4 more submodels. (Show all) Show less info

GRANATELLI MPG PLUS SPARK PLUG WIRES, SET OF 3

Granatelli MPG Plus Spark Plug Wire increases power to the spark plug up to 400 percent over stock for more power and better gas mileage. Provides faster engine startup, smoother running engine, and boosts horsepower and torque.

Specifications:

• 8 mm diameter
• 0 ohm resistance

Features:

• Solid stainless connector cable with stainless snap lock spark plug connectors
• Fiberglass-reinforced braid resists temperatures up to 500 degrees
• Unique EMI/RMI protection ring that prevents stereo noise and no RFI/EMI interference
• Patented design works with any fuel injection
• Provides necessary pieces for a complete installation

Ideal for use with aftermarket headers and turbocharger systems.

Fits the following 1988-1992 Daihatsu Charade submodels:

• 1988-1992: All Submodels; All Engines;

BECK ARNLEY PREMIUM SPARK PLUG WIRES, BLACK, SET OF 4

Beck Arnley Spark Plug Wires are made of stainless steel terminals that are positively crimped with external pull strength for reliable connections. Designed with OE style boot seal to protect connection against heat, dirt, and moisture.

Specifications:

• 7 mm diameter
• Mag core 500 ohms/feet conductor type
• Silicone jacket material

Features:

• 100 percent pure silicone jacket
• Fiberglass braiding provides an extra strength and flexibility for higher class rating
• EPDM inner insulation prevents arcing and voltage leak

All set comes with wire separators and electric grease packets where applicable.

Fits the following 1989-1992 Daihatsu Charade submodels:

• 1990-1992: SE; 4 Cyl 1.3L;
• 1990-1992: SX; 4 Cyl 1.3L;

• 1989-1989: CLS; 4 Cyl 1.3L;

• 1989-1989: CLX; 4 Cyl 1.3L;

Fits 2 more submodels. (Show all) Show less info