Land Rover Ignition Wire Set

Bosch Ignition Wire Set

Bosch ignition leads incorporate the latest inductive core technology. The specialised construction of stainless steel wire winding wrapped around a Kevlar® reinforced aramid core, filters the RF interference by restricting the AC component. This allows DC energy to flow easily through the resistance of the spiral winding which has a lower resistance than normal resistive leads.

The overall construction of the cable core, spark plug boots and outer jacket make Bosch ignition leads suitable for use with gasoline, LPG or alternative fuel engines.

• Latest cable technology using inductive core for better performance
• 100% silicone construction inner and outer insulating sheathing
• Class F cables with superior heat resistance up to 250°C
• Ensures high performance whilst maintaining peak voltage to the spark plugs
• Exceeds International Standard ISO3808:2002(E) for High Voltage Ignition Cables
• Excellent RFI suppression and electrical conductivity properties
• High liner & tensile strength fiber glass reinforcing braid for longer life
• Resistance to aggressive under bonnet conditions of fuels and oils

Warranty Information: 5 year - 50,000 mile limited warranty against defects in material and workmanship.

---

w/o Coil Wire

Fits the following 1994-1999 Land Rover Discovery submodels:

• 1999-1999: SD; All Engines;
• 1994-1998: All Submodels; All Engines;

PRESTOLITE PROCONNECT SPARK PLUG WIRES, SET OF 8

Prestolite ProConnect Spark Plug Wire offers superior fiberglass, silicone, and Kevlar construction for excellent conductivity. High temperature performance, EMI/RFI noise suppression, and durability. Wiring systems are specially designed to meet customer-established performance, reliability, and cost specifications.

Features:

• OE conductor and OE/OES specified insulators, nipples, and terminals
• Superior fiberglass, silicone, and Kevlar construction for excellent conductivity, high temperature performance, EMI/RFI noise suppression, and durability
• Estimated to withstand temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit
• Click-in-place end caps design that match to OE end caps for quick installation and a tight fit without adjustment that gives a perfect fit
• Ignition cable and wiring systems specially designed to meet customer-established performance, reliability, and cost specifications
• Electronic protection systems from electrical or magnetic interference
• Resistant to heat, cold, and chemical attack

Allows for all weather starting. Meets SAE j2031 class E specifications. Won't crack or shrink and carries a maximum voltage.

Fits the following 1999-2004 Land Rover Discovery submodels:

• 2003-2004: HSE; 8 Cyl 4.6L;
• 2003-2004: S; 8 Cyl 4.6L;

• 2003-2004: SE; 8 Cyl 4.6L;

• 2001-2002: Series II SD; 8 Cyl 4.0L;

• 2001-2002: Series II SE; 8 Cyl 4.0L;

• 2001-2001: Series II LE; 8 Cyl 4.0L;

• 1999-2000: Series II; 8 Cyl 4.0L;

Fits 5 more submodels. (Show all) Show less info

DENSO FIRST TIME FIT IGNITION WIRES, SET OF 8

Denso First Time Fit Ignition Wires are identical in form, fit, color, and performance to the factory-installed wire sets, and constructed to meet OE standards. Ferrite impregnated layers, silicone insulation for superior dielectric and heat performance, and high temperature Class E silicon jacket to withstand chemicals, moisture, and temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit.

Specifications:

• 7 mm diameter

Features:

• Pre-cut wire to exact length with reinforcing member for added strength and terminal retention
• Passed tests covering everything from electrical properties to shrinkage to chemical resistance and accelerated life testing
• Identical OE end caps, carbon impregnated fiberglass core for superior conductivity, fiberglass braid for maximum strength, conductive silicone layer for high temperature performance, and EMI/RFI noise suppression

Easy installation.

Fits the following 1999-2004 Land Rover Discovery submodels:

• 2003-2004: HSE; 8 Cyl 4.6L;
• 2003-2004: S; 8 Cyl 4.6L;

• 2003-2004: SE; 8 Cyl 4.6L;

• 2001-2002: Series II SD; 8 Cyl 4.0L;

• 2001-2002: Series II SE; 8 Cyl 4.0L;

• 2001-2001: Series II LE; 8 Cyl 4.0L;

• 1999-2000: Series II; 8 Cyl 4.0L;

Fits 5 more submodels. (Show all) Show less info

STANDARD SPARK PLUG WIRES, BLACK, SET OF 4

Standard Spark Plug Wires are engineered with silicone outer jacket to match the original that provides superior protection against severe under-hood operating environment. Silicone rubber provides unsurpassed heat resistance and eliminates burn-out for a tougher output.

Specifications:

• Assembled
• RFI suppression
• Stock distributor terminal ends
• Silicone jacket material
• Stock spark plug boot ends
• Spiral core conductor style
• Includes coil wire

Features:

• Aramid fibers provide maximum tensile strength preventing breaks and hot spots
• Fiberglass braid add to the wire's strength while increasing overall flexibility
• EPDM rubber insulation is the finest insulating material available to protect against voltage leaks
• Graphite impregnated latex, a conductive material with calibrated resistance to prevent radio frequency interference

Fits the following 1958-1966 Land Rover Land Rover submodels:

• 1958-1966: All Submodels; All Engines;

BECK ARNLEY PREMIUM SPARK PLUG WIRES, BLACK, SET OF 8

Beck Arnley Spark Plug Wires are made of stainless steel terminals that are positively crimped with external pull strength for reliable connections. Designed with OE style boot seal to protect connection against heat, dirt, and moisture.

Specifications:

• 7 mm diameter
• Mag core 500 ohms/feet conductor type
• Silicone jacket material

Features:

• 100 percent pure silicone jacket
• Fiberglass braiding provides an extra strength and flexibility for higher class rating
• EPDM inner insulation prevents arcing and voltage leak

All set comes with wire separators and electric grease packets where applicable.

Fits the following 1987-1995 Land Rover Range Rover submodels:

• 1995-1995: 25th Anniversary Edition; 8 Cyl 4.2L;
• 1993-1995: County LWB; 8 Cyl 4.2L;

• 1989-1994: County; 8 Cyl 3.9L;

• 1993-1993: Sport; 8 Cyl 3.9L;

• 1992-1992: LSE; 8 Cyl 3.9L;

• 1989-1992: Base; 8 Cyl 3.9L;

• 1991-1991: County SE; 8 Cyl 3.9L;

• 1991-1991: Great Divide; 8 Cyl 3.9L;

• 1989-1991: Hunter; 8 Cyl 3.9L;

• 1988-1988: 40th Anniversary Edition; 8 Cyl 3.5L;

• 1987-1988: Base; 8 Cyl 3.5L;

Fits 9 more submodels. (Show all) Show less info

Prenco
Prenco is a leading manufacturer and supplier of OE quality ignition, electrical, brake, engine, and emission products to the automotive aftermarket.

Fits the following 2002-2005 Land Rover Freelander submodels:

• 2002-2005: All Submodels; All Engines;

Karlyn Ignition Wire Set

The Karlyn Ignition Wire Set incorporates two layers of high grade silicone for superior heat and voltage protection. The double extruded Silicone-over-Silicone wire contains 19 strands of tinned copper core which provides super conductivity and corrosion resistance.

• OE-Equivalent.
• OEM style connectors for easy Installation.
• Resistant to high temperatures, corrosion and vibration.
• Ignition noise suppressed.
• Includes O.E. Type Connectors, Looms, Sensors and Harness Clips when required

Warranty Information: 12 Month - 12,000 mile limited warranty against defects in material and workmanship.

---

Fits the following 1999-2004 Land Rover Discovery submodels:

• 2000-2004: All Submodels; All Engines;
• 1999-1999: Series II; All Engines;

Eurospare Ignition Wire Set

The Eurospare ignition wire set utilizes OE connectors and a copper core silicone wire that is waterproof, resistant to corrosion, high temperatures and vibration.

• OE-Equivalent.
• OEM style connectors for easy Installation.
• Resistant to high temperatures, corrosion and vibration.
• Ignition noise suppressed.

Warranty Information: 12 Month - 12,000 mile limited warranty against defects in material and workmanship.

---

Fits the following 1987-1995 Land Rover Range Rover submodels:

• 1995-1995: 25th Anniversary Edition; All Engines;
• 1995-1995: County Classic; 8 Cyl 3.9L;

• 1995-1995: County LWB; All Engines;

• 1987-1994: All Submodels; All Engines;

Fits 2 more submodels. (Show all) Show less info

OE Aftermarket Ignition Wire Set

The OE Aftermarket Ignition wire set is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment manufacturer.

• OE-Equivalent.
• OEM connectors for easy Installation.
• Resistant to high temperatures, corrosion and vibration.
• Ignition noise suppressed.

The OEA Ignition wire set in most cases is manufactured by the same company who supplies the vehicle manufacturer.

Warranty Information: 12 Month - 12,000 mile limited warranty against defects in material and workmanship.

---

Fits the following 1996-1999 Land Rover Discovery submodels:

• 1999-1999: SD; All Engines;
• 1996-1998: All Submodels; All Engines;