Subaru Ignition Wire Set

SPARK PLUG WIRE -- A high quality, OE replacement spark plug wire; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1999-2004 Subaru Impreza submodels:

• 2004-2004: Outback; 4 Cyl 2.5L; "Naturally Aspirated"
• 2004-2004: RS; 4 Cyl 2.5L; "Naturally Aspirated"

• 2004-2004: TS; 4 Cyl 2.5L; "Naturally Aspirated"

• 2004-2004: WRX STI; 4 Cyl 2.5L; "Naturally Aspirated"

• 2002-2003: Outback; 4 Cyl 2.5L;

• 2002-2003: RS; 4 Cyl 2.5L;

• 2002-2003: TS; 4 Cyl 2.5L;

• 1999-2001: All Submodels; All Engines;

Fits 6 more submodels. (Show all) Show less info

Bosch Ignition Wire Set

Bosch ignition leads incorporate the latest inductive core technology. The specialised construction of stainless steel wire winding wrapped around a Kevlar® reinforced aramid core, filters the RF interference by restricting the AC component. This allows DC energy to flow easily through the resistance of the spiral winding which has a lower resistance than normal resistive leads.

The overall construction of the cable core, spark plug boots and outer jacket make Bosch ignition leads suitable for use with gasoline, LPG or alternative fuel engines.

• Latest cable technology using inductive core for better performance
• 100% silicone construction inner and outer insulating sheathing
• Class F cables with superior heat resistance up to 250°C
• Ensures high performance whilst maintaining peak voltage to the spark plugs
• Exceeds International Standard ISO3808:2002(E) for High Voltage Ignition Cables
• Excellent RFI suppression and electrical conductivity properties
• High liner & tensile strength fiber glass reinforcing braid for longer life
• Resistance to aggressive under bonnet conditions of fuels and oils

Warranty Information: 5 year - 50,000 mile limited warranty against defects in material and workmanship.

---

Fits the following 2000-2003 Subaru Outback submodels:

• 2001-2003: Base; 4 Cyl 2.5L;
• 2001-2003: Limited; 4 Cyl 2.5L;

• 2000-2000: All Submodels; All Engines;

Fits 1 more submodels. (Show all) Show less info

PRESTOLITE PROCONNECT SPARK PLUG WIRES, SET OF 4

Prestolite ProConnect Spark Plug Wire offers superior fiberglass, silicone, and Kevlar construction for excellent conductivity. High temperature performance, EMI/RFI noise suppression, and durability. Wiring systems are specially designed to meet customer-established performance, reliability, and cost specifications.

Features:

• OE conductor and OE/OES specified insulators, nipples, and terminals
• Superior fiberglass, silicone, and Kevlar construction for excellent conductivity, high temperature performance, EMI/RFI noise suppression, and durability
• Estimated to withstand temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit
• Click-in-place end caps design that match to OE end caps for quick installation and a tight fit without adjustment that gives a perfect fit
• Ignition cable and wiring systems specially designed to meet customer-established performance, reliability, and cost specifications
• Electronic protection systems from electrical or magnetic interference
• Resistant to heat, cold, and chemical attack

Allows for all weather starting. Meets SAE j2031 class E specifications. Won't crack or shrink and carries a maximum voltage.

Fits the following 1998-1998 Subaru Impreza submodels:

• 1998-1998: RS; 4 Cyl 2.5L;

DENSO FIRST TIME FIT IGNITION WIRES, SET OF 4

Denso First Time Fit Ignition Wires are identical in form, fit, color, and performance to the factory-installed wire sets, and constructed to meet OE standards. Ferrite impregnated layers, silicone insulation for superior dielectric and heat performance, and high temperature Class E silicon jacket to withstand chemicals, moisture, and temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit.

Specifications:

• 7 mm diameter

Features:

• Pre-cut wire to exact length with reinforcing member for added strength and terminal retention
• Passed tests covering everything from electrical properties to shrinkage to chemical resistance and accelerated life testing
• Identical OE end caps, carbon impregnated fiberglass core for superior conductivity, fiberglass braid for maximum strength, conductive silicone layer for high temperature performance, and EMI/RFI noise suppression

Easy installation.

Fits the following 2003-2006 Subaru Baja submodels:

• 2006-2006: Sport; 4 Cyl 2.5L; "GAS, FI, EJ253, Naturally Aspirated"
• 2004-2005: Turbo; 4 Cyl 2.5L;

• 2003-2005: Sport; 4 Cyl 2.5L;

• 2003-2003: Base; 4 Cyl 2.5L;

Fits 2 more submodels. (Show all) Show less info

AC DELCO IGNITION WIRES, SET OF 4

AC Delco Ignition Wires meet or exceed original equipment quality specifications. Made from top-quality materials, precisely engineered and manufactured to provide everyday reliability and efficient performance.

Features:

• Constructed from top quality materials to help the engine run clean and longer
• Copper-core center electrode
• Engineered to high standards and tested under extreme conditions to exceed OE specifications
• Delivers high quality and dependable performance

Fits the following 1990-1994 Subaru Loyale submodels:

• 1990-1994: Base; 4 Cyl 1.8L; "GAS, FI, Naturally Aspirated, VIN 5"
• 1990-1993: Base; 4 Cyl 1.8L; "GAS, FI, Naturally Aspirated, VIN 4"

• 1990-1990: RS; 4 Cyl 1.8L; "GAS, FI, Naturally Aspirated, VIN 5"

Fits 1 more submodels. (Show all) Show less info

STANDARD SPARK PLUG WIRES, BLACK, SET OF 4

Standard Spark Plug Wires are engineered with silicone outer jacket to match the original that provides superior protection against severe under-hood operating environment. Silicone rubber provides unsurpassed heat resistance and eliminates burn-out for a tougher output.

Specifications:

• Assembled
• RFI suppression
• Stock distributor terminal ends
• Silicone jacket material
• Stock spark plug boot ends
• Spiral core conductor style
• Includes coil wire

Features:

• Aramid fibers provide maximum tensile strength preventing breaks and hot spots
• Fiberglass braid add to the wire's strength while increasing overall flexibility
• EPDM rubber insulation is the finest insulating material available to protect against voltage leaks
• Graphite impregnated latex, a conductive material with calibrated resistance to prevent radio frequency interference

Fits the following 1975-1975 Subaru GF submodels:

• 1975-1975: Base; 4 Cyl 1.4L;

GRANATELLI MPG PLUS SPARK PLUG WIRES, SET OF 4

Granatelli MPG Plus Spark Plug Wire increases power to the spark plug up to 400 percent over stock for more power and better gas mileage. Provides faster engine startup, smoother running engine, and boosts horsepower and torque.

Specifications:

• 8 mm diameter
• 0 ohm resistance

Features:

• Solid stainless connector cable with stainless snap lock spark plug connectors
• Fiberglass-reinforced braid resists temperatures up to 500 degrees
• Unique EMI/RMI protection ring that prevents stereo noise and no RFI/EMI interference
• Patented design works with any fuel injection
• Provides necessary pieces for a complete installation

Ideal for use with aftermarket headers and turbocharger systems.

Fits the following 1980-1987 Subaru Brat submodels:

• 1980-1987: All Submodels; All Engines;

BECK ARNLEY PREMIUM SPARK PLUG WIRES, BLACK, SET OF 4

Beck Arnley Spark Plug Wires are made of stainless steel terminals that are positively crimped with external pull strength for reliable connections. Designed with OE style boot seal to protect connection against heat, dirt, and moisture.

Specifications:

• 7 mm diameter
• Mag core 500 ohms/feet conductor type
• Silicone jacket material

Features:

• 100 percent pure silicone jacket
• Fiberglass braiding provides an extra strength and flexibility for higher class rating
• EPDM inner insulation prevents arcing and voltage leak

All set comes with wire separators and electric grease packets where applicable.

Fits the following 1972-1989 Subaru GL submodels:

• 1985-1989: Base; 4 Cyl 1.8L; "Naturally Aspirated"
• 1984-1987: Turbo; 4 Cyl 1.8L;

• 1980-1987: Base; 4 Cyl 1.8L;

• 1973-1975: Base; 4 Cyl 1.4L;

• 1972-1972: Base; 4 Cyl 1.3L;

Fits 3 more submodels. (Show all) Show less info

NGK Ignition Wire Set

NGK Resistor Spark Plug Wire Sets utilize a construction method known as "variable pitch" wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by "scrambling" and breaking up the electrical waves radiated by the firing of the spark plugs.

NGK Spark Plug Wire Sets are built to meet stringent OEM tolerances for a variety of import vehicles

• OE-Equivalent.
• OEM style connectors for easy Installation.
• Superior Firing and Fuel Savings
• Outstanding Durability and Performance
• Excellent Noise Suppression
• Numbered for easy cylinder identification.
• High quality EPDM and Silicone coverings.

CONSTRUCTION

A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter vs. 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

Warranty Information: 12 Month - 12,000 mile limited warranty against defects in material and workmanship.

---

FX58 NGK

Fits the following 1999-2004 Subaru Impreza submodels:

• 2004-2004: Outback; 4 Cyl 2.5L; "Naturally Aspirated"
• 2004-2004: RS; 4 Cyl 2.5L; "Naturally Aspirated"

• 2004-2004: TS; 4 Cyl 2.5L; "Naturally Aspirated"

• 2004-2004: WRX STI; 4 Cyl 2.5L; "Naturally Aspirated"

• 2002-2003: Outback; 4 Cyl 2.5L;

• 2002-2003: RS; 4 Cyl 2.5L;

• 2002-2003: TS; 4 Cyl 2.5L;

• 1999-2001: All Submodels; All Engines;

Fits 6 more submodels. (Show all) Show less info

Karlyn Ignition Wire Set

The Karlyn Ignition Wire Set incorporates two layers of high grade silicone for superior heat and voltage protection. The double extruded Silicone-over-Silicone wire contains 19 strands of tinned copper core which provides super conductivity and corrosion resistance.

• OE-Equivalent.
• OEM style connectors for easy Installation.
• Resistant to high temperatures, corrosion and vibration.
• Ignition noise suppressed.
• Includes O.E. Type Connectors, Looms, Sensors and Harness Clips when required

Warranty Information: 12 Month - 12,000 mile limited warranty against defects in material and workmanship.

---

Fits the following 2005-2006 Subaru Legacy submodels:

• 2006-2006: 2.5i; 4 Cyl 2.5L; "Naturally Aspirated"
• 2006-2006: GT spec.B; 4 Cyl 2.5L; "Naturally Aspirated"

• 2005-2006: GT; 4 Cyl 2.5L; "Naturally Aspirated"

• 2005-2005: GT Limited; 4 Cyl 2.5L; "Naturally Aspirated"

• 2005-2005: Limited; 4 Cyl 2.5L; "Naturally Aspirated"

• 2005-2005: i; 4 Cyl 2.5L; "Naturally Aspirated"

Fits 4 more submodels. (Show all) Show less info