Chevy Corvette Intake Manifold

EDELBROCK PERFORMER EPS INTAKE MANIFOLD -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Non-EGR, A Dual-Plane Manifold That Is Optimized To Deliver Superior Performance With Edelbrock Square-Bore Performer Series Or Thunder Series AVS Carburetors, Has A Runner Design That Is Tuned For Peak Torque Around 3500 RPM On A 350-Inch Engine And It Is Ideal For Power From Off-Idle To 5500 RPM, Dyno Tested To Increase Power By Up To 5 Hp And 9 lb.-ft. of Torque Over The Edelbrock Performer Manifold 2101, Can Be Matched With A Dependable Edelbrock Square-Bore Carburetor For Maximum Performance Gains

Fits the following 1955-1981 Chevrolet Corvette submodels:

• 1956-1981: Base; All Engines;
• 1980-1980: Base; 8 Cyl 5.0L; "CARB"

• 1969-1980: Base; 8 Cyl 5.7L; "CARB"

• 1978-1978: Indianapolis 500 Pace Car; All Engines;

• 1978-1978: Silver Anniversary Edition; All Engines;

• 1975-1976: Stingray; All Engines;

• 1974-1974: Base; 8 Cyl 5.7L; "CARB, VIN T"

• 1972-1972: Base; 8 Cyl 5.7L; "CARB, VIN L"

• 1968-1968: Base; 8 Cyl 5.4L; "CARB"

• 1965-1968: Base; 8 Cyl 5.3L; "CARB"

• 1955-1955: Base; 8 Cyl 4.3L; "CARB"

Fits 9 more submodels. (Show all) Show less info

EFI HIGH RISE DUAL PLANE INTAKE MANIFOLD -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Satin Finish, Power Band Idle to 6,000 RPM, EGR Compatible, Cast Iron Head

Fits the following 1987-1991 Chevrolet Corvette submodels:

• 1990-1991: Base; 8 Cyl 5.7L;
• 1990-1991: ZR-1; 8 Cyl 5.7L;

• 1987-1989: All Submodels; All Engines;

Fits 1 more submodels. (Show all) Show less info

PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, 85MM THROTTLE BODY OPENING, POLISHED -- This Manifold Is Proven To Provide 17.7 More HP At 6,200 RPM And More Power In The Mid-Range As Well, It Has A 1500-6500 RPM Power Range, Nitrous Bosses That Are Positioned On The Port Runners, High Volume Fuel Rails With Stainless Steel Mounting Brackets, Stainless Steel Hardware And A -6 AN Stainless Steel Braided Connection Crossover Hose, Additional Stock Fuel Inlet Line Fittings Are Also Supplied

Fits the following 1997-2004 Chevrolet Corvette submodels:

• 1997-2004: All Submodels; All Engines;

WEIAND ACTION PLUS SERIES INTAKE MANIFOLD, SATIN FINISH -- Single 4 Barrel Manifold, Non-EGR, Square Flange Carburetor Mounting, 180 Degree Low-Rise Dual-Plane Manifold Designed As A Stock Replacement Manifold With Improved Power And Torque Characteristics, Effective RPM Range Idle-5500, Carburetor Mounting Pads Available, Satin Finish

Fits the following 1957-1991 Chevrolet Corvette submodels:

• 1990-1991: ZR-1; 8 Cyl 5.7L;
• 1969-1991: Base; 8 Cyl 5.7L;

• 1957-1989: All Submodels; All Engines;

• 1980-1980: Base; 8 Cyl 5.0L;

• 1974-1974: Base; 8 Cyl 5.7L; "VIN T"

• 1972-1972: Base; 8 Cyl 5.7L; "VIN L"

• 1968-1968: Base; 8 Cyl 5.4L;

• 1965-1968: Base; 8 Cyl 5.3L;

Fits 6 more submodels. (Show all) Show less info