APWPART FINDER
My Vehicle Add New
  • Select Year
  • Select Make
  • Select Model
  • Select Submodel
  • Select Engine

Shop by Brand

Mercury Cyclone Intake Manifold

We have 5 Items In-stock. Select a year to continue.
$382.57 List Price $451.43 Save $68.86 Availability: In Stock
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 351-C, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, Ford 351C
  • SKU#: E117564
  • Brand: Edelbrock
  • Quantity Sold: Sold Individually
  • Anticipated Ship Out Time: 2-3 business days
 
Fits the following Mercury Cyclone Years:
  • 1970-1971 | 8 Cyl 5.8L | Base, GT, Spoiler
$190.29 List Price $282.71 Save $92.42 Availability: In Stock
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- 50-state legal; 1500 to 6500 RPM power range; Rectangular port; This manifold is a dual plane 180-degree medium high rise design that delivers outstanding street or race performance across while retaining good throttle response; Has a rear water crossover with the two extra NPT ports and features nitrous bosses; Uses a square bore 600 CFM carb for street performance and 750 CFM carb for race application; Non-EGR compatible; Used with intake gasket part number 54600; Torque manifold bolts to 15 to 18 lb.-ft. only.
  • SKU#: P8954001
  • Brand: Professional Products
  • Fit Note: Without Cruise Control
  • Product Fit: Direct Fit
  • Quantity Sold: Sold Individually
  • Anticipated Ship Out Time: 3-4 business days
  • Carburetor Flange Type: Square bore
  • Intake Type: Dual plane
(see more)
Fits the following Mercury Cyclone Years:
  • 1970 | 8 Cyl 5.0L | GT
  • 1969-1970 | 8 Cyl 5.0L | Spoiler
(see more)
$281.34 List Price $331.98 Save $50.64 Availability: In Stock
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 351-4V, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, Non-EGR, Idle-5500 RPM, Cast Finish, Will not Accept Stock Motorcraft Spread-Bore Carburetor, Recommended Gaskets FelPro Gasket Part number 1228 For Manifold Gasket
  • SKU#: E112665
  • Brand: Edelbrock
  • Quantity Sold: Sold Individually
  • Anticipated Ship Out Time: 2-3 business days
 
Fits the following Mercury Cyclone Years:
  • 1970-1971 | 8 Cyl 5.8L | Base, GT, Spoiler
$218.83 List Price $338.78 Save $119.95 Availability: In Stock
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Not for exhaust heated or stock style chokes.
  • SKU#: P8954026
  • Brand: Professional Products
  • Fit Note: Not Legal For Sale/Use On Pollution Controlled Vehicles
  • Product Fit: Direct Fit
  • Quantity Sold: Sold Individually
  • Anticipated Ship Out Time: 3-4 business days
  • Intake Type: Dual plane
  • Operating RPM Range: 1500 to 6500 rpm
(see more)
Fits the following Mercury Cyclone Years:
  • 1970 | 8 Cyl 5.0L | GT
  • 1969-1970 | 8 Cyl 5.0L | Spoiler
(see more)
$229.27 List Price $355.80 Save $126.53 Availability: In Stock
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- 50-state legal; 1500 to 6500 RPM power range; Rectangular port; A dual plane 180-degree medium high rise design that delivers outstanding street or race performance across while retaining good throttle response; Has a rear water crossover with the two extra NPT ports and features nitrous bosses; Uses a square bore 600 CFM carb for street performance and 750 CFM carb for race application; Non-EGR compatible; Used with intake gasket part number 54600; Torque manifold bolts to 15 to 18 lb.-ft. only.
  • SKU#: P8954000
  • Brand: Professional Products
  • Fit Note: Without Cruise Control
  • Product Fit: Direct Fit
  • Quantity Sold: Sold Individually
  • Anticipated Ship Out Time: 3-4 business days
  • Carburetor Flange Type: Square bore
  • Intake Type: Dual plane
(see more)
Fits the following Mercury Cyclone Years:
  • 1970 | 8 Cyl 5.0L | GT
  • 1969-1970 | 8 Cyl 5.0L | Spoiler
(see more)