order by phone (Se Habla Español) 1-800-913-6119 | 1-801-214-2997 or Live Chat
APWPART FINDER
My Vehicle Add New
  • Select Year
  • Select Make
  • Select Model
  • Select Submodel
  • Select Engine

Shop by Brand

Ford Mustang Intake Manifold Spacer

We have 27 Items In-stock. Select a year to continue.
$248.89 List Price $293.69 Save $44.80 Availability: In Stock
  • APW Bestseller
  • Free Ground Shipping
  • Low Price Guarantee
Earn Double
AutoPoints
Instead of 249,
INTAKE MANIFOLD KIT -- 50-state legal; Includes gaskets, thermostat, O-rings, and universal alternator bracket; A high quality, OE replacement intake manifold kit; Backed by 1-year, unlimited-mileage warranty.
  • SKU#: REPL311902
  • Brand: Replacement
  • Quantity Sold: Kit
  • Anticipated Ship Out Time: 1-2 Business Days
  • Notes: Includes gaskets, thermostat, O-rings, and universal alternator bracket
  • Warranty: 1-year, unlimited-mileage warranty
 
Fits the following Ford Mustang Years:
  • 1996-1998 | 8 Cyl 4.6L | GT, SVT Cobra
Rating: (see review/s)

"Very good quality on this product.I purchased 2 of them so far." posted by: Carbuff71 on December 13, 2013

"This is a very good product. It was easy to install and its overall Quality was very good. It arrived at my house in a few days. However There was no tightening diagram to show the tightening order I had to get it off of Utube. And after several requests I still have yet to recieve an invoice. The product was very good but the customer service is lacking." posted by: Big B on November 14, 2013 view all 5 reviews

$214.48 List Price $253.09 Save $38.61 Availability: In Stock
  • APW Bestseller
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
DORMAN INTAKE MANIFOLD KIT -- 50-state legal; Includes thermostat, gaskets, and O-rings; Features reinforced aluminum coolant crossover that means there will be no repeat failure due to corrosion and vibration, integrated silicone gasket that means no separate gasket to deal with and fewer leak paths at cylinder heads and throttle body, and reinforced coolant passages that means stronger protection against recurring leaks; It also has thicker intake walls and better fillet design to prevent warping of the manifold at the gasket mounting surfaces; Designed to eliminate the double sided throttle body gasket; Replaces OE numbers F6SZ 9424-AA, F8AZ 9424-AAA, F8AZ 9424-BAA, F8AZ 9424-BC, F8AZ 9424-CA.
  • SKU#: RB615178
  • Brand: Dorman
  • Quantity Sold: Kit
  • Anticipated Ship Out Time: 1-2 Business Days
  • Includes: Thermostat, Gaskets, O-rings
  • Warranty: Lifetime Dorman limited warranty
 
Fits the following Ford Mustang Years:
  • 1996-1998 | 8 Cyl 4.6L | GT, SVT Cobra
Rating: (see review/s)

"Manifold fit right in. I am not a auto mechanic. I watched a couple of utube videos. And everthing went well. Just be carefull and take your time. It is easier to remove the crash braket with the wipers and cowl removed. I also changed heater core tube under intake. As well as all the heater hoses. Make sure you cover all head holes well intake is removed." posted by: BigD on December 19, 2012

"I love it when a product turns out to BE what it claims, FIT like it should, and WORK RIGHT when I'm done. That is the case with this intake manifold for my 96 Mustang GT. Very straightforward installation, improved appearance and function with the aluminum crossover, an afternoon's time well spent." posted by: DrMagiver on January 4, 2011 view all 9 reviews

$31.62 List Price $37.31 Save $5.69 Availability: In Stock
  • Low Price Guarantee
(

more

)
FELPRO INTAKE MANIFOLD GASKETS, SET OF 3 -- High quality, OE replacement intake manifold gaskets.
  • SKU#: FPMS957282
  • Brand: Felpro
  • Fit Note: Car
  • Gasket Material: Rubber
 
Fits the following Ford Mustang Years:
  • 1996-1998 | 8 Cyl 4.6L | GT
$17.09 List Price $20.17 Save $3.08 Availability: In Stock
  • Low Price Guarantee
(

more

)
VICTOR INTAKE MANIFOLD GASKET KIT -- A high quality, OE replacement intake manifold gasket kit; Replaces OE numbers Z1806, Z2713, C2OE 9441, C2OE 9441-B, C2OE 9441-D, C2OE 9441C, C2OZ 9433-A, C2OZ 9441-A, C2OZ 9441-A2, C3AZ 9433-B, C3AZ 9433-D, C3AZ 9433-H, C3AZ 9441-A, C3AZ 9441-C, C5OE 9439-A4, and D1AZ 9433-B.
  • SKU#: VICMS15172
  • Brand: Victor
  • Replaces OE Number: Z1806, Z2713, C2OE 9441, C2OE 9441-B, C2OE 9441-D, C2OE 9441C, C2OZ 9433-A, C2OZ 9441-A, C2OZ 9441-A2, C3AZ 9433-B, C3AZ 9433-D, C3AZ 9433-H, C3AZ 9441-A, C3AZ 9441-C, C5OE 9439-A4, D1AZ 9433-B
 
Fits the following Ford Mustang Years:
  • 1970-1973 | 8 Cyl 5.0L | Grande, Mach I
  • 1968-1973 | 8 Cyl 5.0L | Base
(see more)
$239.56 List Price $282.68 Save $43.12 Availability: In Stock
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer RPM 302, Intake Manifold, Designed For Great Top End Power With Good Throttle Response, High Rise, Dual Plane, Non-EGR, 1500-6500rpm, Air-Gap 302, Cast Finish, Recommend FelPro Gasket Part Number 1250 For Manifold Gasket
  • SKU#: E117121
  • Brand: Edelbrock
  • Quantity Sold: Sold Individually
  • Anticipated Ship Out Time: 1-2 Business Days
 
Fits the following Ford Mustang Years:
  • 1984-1985 | 8 Cyl 5.0L | GT, LX
  • 1984 | 8 Cyl 5.0L | GT-350 20th Anniversary, L
(see more)
View All
$15.42 List Price $18.20 Save $2.78 Availability: In Stock
  • Low Price Guarantee
(

more

)
DNJ INTAKE MANIFOLD GASKET KIT -- A high quality, OE replacement intake manifold gasket kit.
  • SKU#: DNJIG4112
  • Brand: DNJ
  • Fit Note: Without High Output
  • Warranty: 12-month or 12,000-mile DNJ limited warranty
 
Fits the following Ford Mustang Years:
  • 1970-1973 | 8 Cyl 5.0L | Grande, Mach I
  • 1968-1973 | 8 Cyl 5.0L | Base
(see more)
$229.27 List Price $355.80 Save $126.53 Availability: In Stock
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- 50-state legal; 1500 to 6500 RPM power range; Rectangular port; A dual plane 180-degree medium high rise design that delivers outstanding street or race performance across while retaining good throttle response; Has a rear water crossover with the two extra NPT ports and features nitrous bosses; Uses a square bore 600 CFM carb for street performance and 750 CFM carb for race application; Non-EGR compatible; Used with intake gasket part number 54600; Torque manifold bolts to 15 to 18 lb.-ft. only.
  • SKU#: P8954000
  • Brand: Professional Products
  • Fit Note: Without Cruise Control
  • Product Fit: Direct Fit
  • Quantity Sold: Sold Individually
  • Anticipated Ship Out Time: 3-4 business days
  • Carburetor Flange Type: Square bore
  • Intake Type: Dual plane
(see more)
Fits the following Ford Mustang Years:
  • 1995 | 8 Cyl 5.0L | GTS
  • 1993-1995 | 8 Cyl 5.0L | SVT Cobra
(see more)
$20.16 List Price $30.51 Save $10.35 Availability: In Stock
  • Clearance Item
  • Low Price Guarantee
(

more

)
MR GASKET PERFORMANCE INTAKE MANIFOLD GASKET SET -- 2.48 in. port diameter, 0.0625 in. thick; Made from high-quality cellulose/nitrile composition gasket material; Provides excellent sealing and durability; Can be trimmed if needed for modified ports; Ideal for OE replacement, high performance street use, drag racing, or oval track racing; With Mr. Gasket's limited 90-day warranty.
  • SKU#: G12207G
  • Brand: Mr Gasket
  • Fit Note: 429 Boss Hemi
  • Gasket Material: Cellulose/nitrile composition
 
Fits the following Ford Mustang Years:
  • 1970 | 8 Cyl 7.0L | Base, Boss 429, Grande, Mach I
  • 1969 | 8 Cyl 7.0L | Base, Boss 429, Shelby GT-500
$30.12 List Price $35.54 Save $5.42 Availability: In Stock
  • Low Price Guarantee
(

more

)
INTAKE MANIFOLD GASKET, FOR SYSTEMAX MANIFOLD -- Excellent Seating And Sealing Characteristics, Made Kormetal, Goes Between Upper And Lower Manifold
  • SKU#: H1910880
  • Brand: Holley
  • Anticipated Ship Out Time: 1-2 Business Days
  • Gasket Material: Steel
 
Fits the following Ford Mustang Years:
  • 1995 | 8 Cyl 5.0L | GTS
  • 1993-1995 | 8 Cyl 5.0L | SVT Cobra
(see more)
$29.95 List Price $35.34 Save $5.39 Availability: In Stock
  • Low Price Guarantee
(

more

)
  • SKU#: W0133-1700017
  • Brand: OES Genuine
 
Fits the following Ford Mustang Years:
  • 1996-1998 | All Engines | GT
$28.95 List Price $35.82 Save $6.87 Availability: In Stock
  • Low Price Guarantee
(

more

)
The Mahle Group
The MAHLE Group is one of the largest global automotive parts manufacturers, specializing in Engine Components, Filtration and Peripherals.

Pair of Gaskets
  • SKU#: W0133-1917179
  • Brand: Mahle
 
Fits the following Ford Mustang Years:
  • 1999-2000 | 8 Cyl 4.6L | GT
  • 1999 | 8 Cyl 4.6L | SVT Cobra
$66.08 List Price $129.55 Save $63.47 Availability: In Stock
  • Free Ground Shipping
  • Low Price Guarantee
Earn Double
AutoPoints
Instead of 66,
KOOL VUE 1000 SERIES HIGH-FLOW PERFORMANCE COLD AIR INTAKE SYSTEM -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; Provides additional power up to 7.3 h.p. at 5000 RPM and 7.6 lb.-ft. of torque at 5000 RPM; Up to 99 percent filtration efficiency; Includes premium red air filter, intake tube, and all necessary hardware for easy installation; Features polished intake tubing that is made of lightweight T-6061 aluminum; Provides more power throughout the vehicle's full RPM range using mandrel-bent piping and reusable high flowing air filter; Backed by 2-year Kool Vue limited warranty.
  • SKU#: KV4401141K
  • Brand: Kool Vue
  • Quantity Sold: Assembly
  • Tube Material: Aluminum
  • Tube Color/Finish: Polished
  • Air Filter Material: Cotton gauze
  • Air Filter Type: Oiled
(see more)
Fits the following Ford Mustang Years:
  • 2003 | 8 Cyl 4.6L | Mach I, SVT Cobra 10th Anniversary
  • 1996-2003 | 8 Cyl 4.6L | GT, SVT Cobra
(see more)
$254.99 List Price $463.32 Save $208.33 Availability: In Stock
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
K&N – 57 SERIES FUEL-INJECTED COLD AIR INTAKE KITS

When most people think of vehicle performance, K&N comes to mind. K&N’s fuel-injected performance cold air intake kits feature an extra large conical filter for maximum cold air flow and a rotationally molded, non-metallic intake tube designed to eliminate air turbulence and the annoying noise that metal intakes can make. Started in 1969, K&N has garnered a reputation for engineering the world’s finest filtration products for cars, trucks, SUVs, motorcycles, race vehicles, commercial vehicles and anything in-between.

  • Great for vehicles with fuel injection
  • Replaces existing air filter and box
  • Includes rotationally-molded polyethylene tube for less noise than metal intake tubes
  • Conveniently uses stock mounting points and holes
  • Installs in less than 2 hours
  • Boosts cold air flow which translates to more horsepower
  • Backed by K&N’s million mile warranty
  • Custom fit to your vehicle’s specifications
  • Includes cotton-gauze conical air filter with 100,000-mile cleaning intervals
  • The world’s best fuel-injected cold air intake system
  • All filters are washable, reusable and come already oiled by K&N
  • CARB-exempt/50-state legal
  • SKU#: K335725193
  • Brand: K&N
  • Fit Note: California Air Resources Board Exempt: Yes, CARB EO: D-269-28, High Density Polyethylene Tube
  • Quantity Sold: Assembly
  • Tube Material: Plastic
  • Tube Color/Finish: Black
  • Air Filter Material: Cotton gauze
  • Air Filter Type: Oiled
(see more)
Fits the following Ford Mustang Years:
  • 1996-2004 | 8 Cyl 4.6L | GT
  • 2003 | 8 Cyl 4.6L | Mach I, SVT Cobra 10th Anniversary
(see more)
Rating: (see review/s)

"I've been getting 22mpg consistently on my stock 2003 Mustang GT out on the highway. Just out of curiosity I installed the cold intake system figuring it couldn't hurt anything and might help performance. What a surprise! I took a 600 mile round trip just after installation and averaged 25.2mpg. I couldn't believe such a simple upgrade could make so much difference. My average speed was 70mph on California's Interstate 5 with some alternate around town driving as well. I just wish I'd added this unit sooner." posted by: Zephyr on September 18, 2008

"awesome part...put on my 04mustang gt. saw instant hp gain..really noticeable" posted by: on June 29, 2008 view all 2 reviews

See Special Price List Price $275.06 Availability: In Stock
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
AFE POWER - MAGNUM FORCE STAGE 2 COLD AIR INTAKE SYSTEMS

The Magnum Force Stage 2 cold air intake system by aFe features a highly tuned, roto-molded intake tube and one of aFe’s bigger pro air filters that is protected by a heavy-duty powder-coated heat shield, all of which improve air flow to boost horsepower while also improving fuel economy. Started in 1999, aFe Power is known for its innovative design and manufacturing standards with regard to filters and cold air intakes for most road-going vehicles.

  • Made in America
  • High-flow washable/reusable aFe Pro DRY S or Pro 5R conical air filter included
  • Replaces existing intake system
  • Powder-coated 16-gauge heat shield
  • Rotationally-molded black intake tube is dyno-tuned for better flow of air
  • An inexpensive way to get a significant jump in horsepower
  • Boosts cold air flow which translates to more horsepower and better mileage
  • Backed by a 2-year warranty
  • SKU#: A155410293
  • Brand: AFE
  • Quantity Sold: Assembly
  • Tube Material: Plastic
  • Tube Color/Finish: Black
  • Air Filter Material: Cotton gauze
  • Air Filter Type: Oiled
(see more)
Fits the following Ford Mustang Years:
  • 2008-2009 | 8 Cyl 4.6L | Bullitt
  • 2005-2009 | 8 Cyl 4.6L | GT
(see more)

Special Price from

When a manufacturer implements a Minimum Advertised Price (MAP) policy, they create limits on the list price that retailers are allowed to advertise their products for.

In line with our efforts to continually provide the lowest possible price, we've made it easier for you to inquire about our Exclusive Pricing on these MAP items.

Ford Mustang Cold Air Intake, aFe Power MagnumFORCE Stage-2, Cold Air Intake, 49-State Legal - no CA shipments

$299.90 List Price $461.38 Save $161.48 Availability: In Stock
  • Free Ground Shipping
  • Low Price Guarantee
(

more

)
AIRAID – COLD AIR DAM INTAKE SYSTEMS

AIRAID’s Cold Air Dam system, which includes a premium washable and re-usable AIRAID SynthaFlow air filter, cold air dam and a bigger/better air intake tube, is perfect for enthusiasts looking to boost performance. AIRAID was founded over 15 years ago in the U.S. as a pioneering manufacturer of cold air intake systems, offering dyno-tested products that increase torque, horsepower and performance.

  • Made in America
  • Boosts cold air flow up to 20% for an increase of up to 18 hp
  • Replaces factory air box with cold air dam that blocks engine heat more effectively and adds a bigger intake tube to get more outside/cooler air
  • Provides up to 820 CFM and 99.99% filtration rate
  • For either diesel or gas vehicles
  • Includes upgraded AIRAID SynthaFlow (oiled) air
  • Computer-designed, tuned and dyno-tested for max torque and horsepower
  • Comes with necessary hardware
  • Installs in minutes without any special tools
  • Lifetime ‘no-hassle’ warranty

  • SKU#: A86450172
  • Brand: Airaid
  • Quantity Sold: Assembly
  • Tube Material: Plastic
  • Tube Color/Finish: Black
  • Air Filter Material: Cotton gauze
  • Air Filter Type: Oiled
(see more)
Fits the following Ford Mustang Years:
  • 2008-2009 | 8 Cyl 4.6L | Bullitt
  • 2005-2009 | 8 Cyl 4.6L | GT
(see more)
Rating: (see review/s)

"This was a great purchase would recommend to other Stang owners, immediate results with HP/TQ. Installation was a breeze and looks great under the hood. Sound under the hood and from my Corsa exhaust is GREAT!" posted by: Disturbed on February 26, 2009

"I installed this product on my 2005 Mustang GT in less than 30 minutes, with no problems at all! I would recommend to AIRAID, and to anyone installing this intake to use a different breather hose configuration than the one mentioned in the instructions, and provided with the kit. The kit tells you to re-use the quick-connect 90 degree OEM fittings to install the new 3/8 rubber breather tube that runs from the valve cover to the AIRAID intake tube. Once you remove the stock quick-connect elbows, the green retaining ring will snap off, redering the quick connect fitting useless. It is suppossed to be able to be re-used, but no one I know has been able to remove the elbows without damaging the OEM fitting. I simply used a piece of 3/8 inch fuel hose with two stainless steel worm drive clamps to make the connection between the fitting on the valve cover and the fitting on the AIRAID intake tube. Much more simple and effective. AIRAID should just include a longer piece of 3/8 inch tubing and two clamps in the kit to make the installation 100% foolproof!!!!! After installation, the butt-dyno was able to detect a very nice increase in power, and the sound of the intake makes your 'Stang sound aggressive both at the grill, and at the exhaust pipes. Great product!!!!!" posted by: CrazyHorse on April 6, 2008 view all 3 reviews

View Less