$28.26List Price $33.35Save $5.09Availability: In Stock
Low Price Guarantee
STABILUS GAS-CHARGED TRUNK LIFT SUPPORT, SOLD INDIVIDUALLY -- 18.42 in. extended length; 13.11 in. compressed length; 0.39 in. rod diameter; 0.86 in. tube diameter; With safety features for anti-trap (see more)
Fit Note: 13.1 in. Compressed Length
Anticipated Ship Out Time:
1-2 business days
Lifetime Stabilus limited warranty
Fits the following Jeep Model:
Grand Cherokee | 8 Cyl 4.7L | Laredo, Limited, Sport, Overland, Special Edition
$27.48List Price $32.43Save $4.95Availability: In Stock
Low Price Guarantee
STRONG ARM GAS CHARGED LIFTGATE LIFT SUPPORT, SOLD INDIVIDUALLY -- 7.65 in. stroke length; 16.18 in. compressed length; 23.83 in. extended length; 0.87 in. body diameter; 0.39 in. shaft diameter; (see more)
$21.89List Price $25.83Save $3.94Availability: In Stock
Low Price Guarantee
MONROE MAX-LIFT GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- Includes installation instructions; Made of steel body pressure cylinder and nitro-carbonized rod for exceptional corrosion (see more)
Anticipated Ship Out Time:
Same day - 1 business day
"Some trial and error during the installation due to no insturctions. Not rocket science stuff but a few "techniques" required. Be careful to start the bolt carefully to avoid cross-threading. Difficult to do due to alignment issures."posted by: JeepMonster on April 2, 2009
"This part, once you have the correct tools to remove and replace, works great. The part is great quality."
posted by: on December 7, 2008view all 2 reviews
$82.01List Price $96.77Save $14.76Availability: In Stock
Free Ground Shipping
Low Price Guarantee
RUGGED RIDGE HOOD LIFT SUPPORT -- Includes 2 gas-charged hood lift struts, brackets, and necessary hardware; Cleans up the under hood appearance of your vehicle; Safely holds the hood in place; May (see more)
"Easy to install, does not have the nice tight swivel joint like the factory intalled units and you cannot take it apart to install or swap out for the swivel. Once installed though they are rock solid and perform well ! Plenty of door lifting power !!"posted by: on August 29, 2009
With this quality Crown lift support, any Jeep model's owner is sure to enjoy the lifting capability of this original equipment component. This product is measured to fit exactly with the height of the liftgate opening while still providing enough room for angle adjustment. Thus, whether the liftgate is desired to provide full access to the back of the Jeep or it is needed to be partly closed, this lift support can definitely adjust. With a design that ensures proper fitment and operation, this lift support comes in one, sturdy, compact piece that requires no special tool for installation. The stainless finish complements well with the black casing, which is infused with carbon fiber for strength and lightness. Also, there is a rubber O-ring to seal the piston and provide an efficient fluid flow through the internal valve components. Equipped with a patented Multi-Lobe Seal that makes for vibration- and temperature-tolerant gas springs, this lift support gives superior performance and reliability because it carries Crown's twelve-month or 12,000-mile limited warranty.
AutoTrust Lift Support
This hood lift support is a perfect original equipment replacement for a Jeep's old or malfunctioning support arm. Installed on the driver or passenger side, this component uses stainless steel for durability. The external casing, which is black and requires less cleaning, is a plastic laminate reinforced with carbon fiber, thus making the entire lift support lightweight yet strong. The product is engineered to directly fit with the hood, and it is user-friendly because it requires no special tools for installation. Equipped with a leak-proof seal, this product is sure to perform with consistent efficiency--what with the promise of a three-year AutoTrust Silver limited warranty.
Omix Lift Support
An Omix lift support is a high-quality OE replacement support arm for any Jeep's liftgate door. This product can be installed either on the driver or passenger side, but a more important advantage is the promise of a no-hassle installation. This lift support's body, which is pressurized and nitro-carbonized, is made of steel for durability and strength. With the plastic laminate rod, main seal, and stop collar, this lift support can definitely support the weight of the liftgate and provide a smooth hydraulic operation. Above all these features, this lift support will allow the owner to raise the Jeep's liftgate to different levels without difficulty. Sold individually, this product carries a three-year Omix limited warranty.
CALIFORNIA TRANSPARENCY IN SUPPLY CHAINS ACT DISCLOSURE
On January 1, 2012, the California Transparency in Supply Chains Act of 2010 (SB 657) went into effect in the State of California. As a result, many companies (above a certain size) manufacturing or selling products in California are required to disclose their efforts (if any) to address the issues of human trafficking and slavery, thereby allowing consumers to make better, more informed choices regarding the products they buy and the companies they choose to support.
AutoPartsWarehouse.com and its subsidiaries (collectively, "AutoPartsWarehouse.com") strive to achieve and maintain high standards of corporate integrity and ethical behavior. AutoPartsWarehouse.com and its employees adhere to the AutoPartsWarehouse.com Code of Ethics and Business Conduct (the "Code"). AutoPartsWarehouse.com expects that its suppliers will conduct their businesses not only in a lawful manner but also in compliance with the same high standards of integrity and ethics. AutoPartsWarehouse.com expects that its suppliers must not support, promote or engage in the practice of slavery or human trafficking, and it requires suppliers to comply with the laws regarding anti-slavery and anti-human trafficking of the country or countries in which they are doing business. AutoPartsWarehouse.com suppliers are further expected to take reasonable and necessary steps to help ensure that their sub-contractors and sub-suppliers conduct business in compliance with the laws regarding anti-slavery and anti-human trafficking of the country or countries in which they are doing business. Suppliers are expected to promptly take corrective action to address any deficiencies identified with respect to compliance with the laws regarding anti-slavery and anti-human trafficking. If a supplier is found to be in violation of the laws regarding anti-slavery and anti-human trafficking AutoPartsWarehouse.com reserves the right to terminate its relationship with that supplier for failure to comply. AutoPartsWarehouse.com employees and management who have direct responsibility for supply chain management regularly visit and inspect its suppliers' facilities to further ensure compliance with laws regarding anti-slavery and anti-human trafficking. AutoPartsWarehouse.com participates in industry groups to share experiences and gain new information to improve compliance in its supply chain. AutoPartsWarehouse.com has zero tolerance for slavery, human trafficking and child labor.
VERIFICATION: AutoPartsWarehouse.com currently does not verify its suppliers in its supply chain to evaluate and address risks of slavery and human trafficking. AutoPartsWarehouse.com does not conduct third party verification of its suppliers' compliance with anti-slavery and anti-human trafficking laws. However, AutoPartsWarehouse.com utilizes its internal resources to regularly visit and inspect its suppliers' places of business to ensure compliance with anti-slavery and anti-human trafficking laws.
AUDITS: AutoPartsWarehouse.com currently does not conduct independent and unannounced formal audits of its suppliers to evaluate compliance with AutoPartsWarehouse.com standards for anti-slavery and anti-human trafficking in its supply chain. However, AutoPartsWarehouse.com utilizes its internal resources to regularly visit and inspect its suppliers' places of business to ensure compliance with anti-slavery and anti-human trafficking laws.
CERTIFICATIONS: AutoPartsWarehouse.com does not require all of its suppliers to provide any certifications regarding compliance with anti-slavery and anti-human trafficking laws of the country or countries in which they are doing business. However, AutoPartsWarehouse.com expects that its suppliers must not support, promote or engage in the practice of slavery or human trafficking, and it requires suppliers to comply with the laws regarding anti-slavery and anti-human trafficking of the country or countries in which they are doing business.
ACCOUNTABILITY: AutoPartsWarehouse.com expects its employees, whose duties involve the AutoPartsWarehouse.com supply chain, to comply with all applicable laws and regulations relating to anti-human trafficking and anti-slavery. AutoPartsWarehouse.com takes the issues of slavery and human trafficking very seriously and will continue doing its part by responsibly managing its supply chains in an effort to eradicate human trafficking and slavery. All reports of alleged violations will be investigated by AutoPartsWarehouse.com. If the results of an investigation indicates that corrective action is required, AutoPartsWarehouse.com will decide the appropriate steps to take, including discipline, dismissal, and possible legal proceedings. Disregard or deliberate ignorance of the law is not tolerated and may lead to disciplinary action.
TRAINING: AutoPartsWarehouse.com requires annual certification from our employees that they understand and will adhere to the Code. AutoPartsWarehouse.com is in the process of conducting awareness training on anti-slavery and anti-human trafficking for its employees and management who have direct responsibility for supply chain management, particularly with respect to mitigating risks within its supply chain.