Buick Regal Multi Rib Belt

DAYCO SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 99.02 in. effective length, W rib profile, standard rib type, rubber backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Fits the following 1982 Buick Regal submodels:

• 1982-1982: Base; 6 Cyl 4.3L; "DIESEL, FI, Naturally Aspirated, VIN V"
• 1982-1982: Limited; 6 Cyl 4.3L; "DIESEL, FI, Naturally Aspirated, VIN V"

DAYCO SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 102 in. effective length, W rib profile, standard rib type, rubber backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Fits the following 1983-1995 Buick Regal submodels:

• 1995-1995: Gran Sport; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN L"
• 1995-1995: Limited; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN L"

• 1992-1995: Base; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN L"

• 1992-1995: Custom; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN L"

• 1985-1985: Base; 8 Cyl 5.7L; "DIESEL, FI, Naturally Aspirated, VIN N"

• 1983-1985: Limited; 6 Cyl 4.3L; "DIESEL, FI, Naturally Aspirated, VIN V"

• 1983-1984: Base; 6 Cyl 4.3L; "DIESEL, FI, Naturally Aspirated, VIN V"

Fits 5 more submodels. (Show all) Show less info

DAYCO SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 69.5 in. effective length, W rib profile, standard rib type, rubber backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Fits the following 1996 Buick Regal submodels:

• 1996-1996: Base; 6 Cyl 3.1L; "GAS, FI, Naturally Aspirated, VIN M"
• 1996-1996: Custom; 6 Cyl 3.1L; "GAS, FI, Naturally Aspirated, VIN M"

DAYCO SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 61.5 in. effective length, W rib profile, standard rib type, rubber backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Fits the following 1988-1989 Buick Regal submodels:

• 1989-1989: Custom; 6 Cyl 3.1L; "GAS, FI, Naturally Aspirated, VIN T"
• 1989-1989: Gran Sport; 6 Cyl 3.1L; "GAS, FI, Naturally Aspirated, VIN T"

• 1989-1989: Limited; 6 Cyl 3.1L; "GAS, FI, Naturally Aspirated, VIN T"

• 1988-1989: Custom; 6 Cyl 2.8L; "GAS, FI, Naturally Aspirated, VIN W"

• 1988-1989: Limited; 6 Cyl 2.8L; "GAS, FI, Naturally Aspirated, VIN W"

Fits 3 more submodels. (Show all) Show less info

DAYCO SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 93 in. effective length, W rib profile, standard rib type, rubber backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Fits the following 1997-1998 Buick Regal submodels:

• 1998-1998: 25th Anniversary Edition; 6 Cyl 3.8L; "GAS, FI, Supercharged, VIN 1"
• 1997-1998: GS; 6 Cyl 3.8L; "GAS, FI, Supercharged, VIN 1"

• 1997-1998: LS; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN K"

Fits 1 more submodels. (Show all) Show less info

DAYCO SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 98.03 in. effective length, W rib profile, standard rib type, rubber backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Fits the following 1983-1985 Buick Regal submodels:

• 1985-1985: Base; 8 Cyl 5.7L; "DIESEL, FI, Naturally Aspirated, VIN N"
• 1983-1985: Limited; 6 Cyl 4.3L; "DIESEL, FI, Naturally Aspirated, VIN V"

• 1983-1984: Base; 6 Cyl 4.3L; "DIESEL, FI, Naturally Aspirated, VIN V"

Fits 1 more submodels. (Show all) Show less info

DAYCO SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 78 in. effective length, W rib profile, standard rib type, rubber backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Fits the following 2011 Buick Regal submodels:

• 2011-2011: CXL; 4 Cyl 2.4L; "GAS, FI, LAF, Naturally Aspirated, VIN C"

DAYCO SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 64 in. effective length, W rib profile, standard rib type, rubber backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Fits the following 1986-1987 Buick Regal submodels:

• 1987-1987: GNX; 6 Cyl 3.8L; "Gas, FI, Turbocharged, VIN 7"
• 1987-1987: Limited; 6 Cyl 3.8L; "Gas, FI, Turbocharged, VIN 7"

• 1986-1987: Grand National; 6 Cyl 3.8L; "Gas, FI, Turbocharged, VIN 7"

• 1986-1986: T-Type; 6 Cyl 3.8L; "Gas, FI, Turbocharged, VIN 7"

Fits 2 more submodels. (Show all) Show less info

DAYCO SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 66.55 in. effective length, W rib profile, standard rib type, rubber backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Fits the following 1997-2004 Buick Regal submodels:

• 1997-2004: GS; 6 Cyl 3.8L; "GAS, FI, Supercharged, VIN 1"
• 2000-2000: GSE; 6 Cyl 3.8L; "GAS, FI, Supercharged, VIN 1"

• 1998-1998: 25th Anniversary Edition; 6 Cyl 3.8L; "GAS, FI, Supercharged, VIN 1"

Fits 1 more submodels. (Show all) Show less info

DAYCO SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 93.5 in. effective length, W rib profile, standard rib type, rubber backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Fits the following 1997 Buick Regal submodels:

• 1997-1997: GS; 6 Cyl 3.8L; "GAS, FI, Supercharged, VIN 1"
• 1997-1997: LS; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN K"

SERPENTINE BELT -- 93.5 in. effective length, 0.82 in. top width, 6 ribs; Multiple accessory; A high quality, OE replacement serpentine belt; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1997 Buick Regal submodels:

• 1997-1997: GS; 6 Cyl 3.8L; "GAS, FI, Supercharged, VIN 1"
• 1997-1997: LS; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN K"

DAYCO POLY COG SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 102.56 in. effective length, W rib profile, standard rib type, rubber backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Fits the following 1982-1994 Buick Regal submodels:

• 1990-1994: Base; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN L"
• 1990-1994: Custom; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN L"

• 1990-1994: Gran Sport; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN L"

• 1990-1994: Limited; 6 Cyl 3.8L; "GAS, FI, Naturally Aspirated, VIN L"

• 1982-1982: Base; 6 Cyl 4.3L; "DIESEL, FI, Naturally Aspirated, VIN V"

• 1982-1982: Limited; 6 Cyl 4.3L; "DIESEL, FI, Naturally Aspirated, VIN V"

Fits 4 more submodels. (Show all) Show less info

SERPENTINE BELT -- 99.02 in. effective length, 0.82 in. top width, 6 ribs; Multiple accessory; A high quality, OE replacement serpentine belt; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1982 Buick Regal submodels:

• 1982-1982: Base; 6 Cyl 4.3L; "DIESEL, FI, Naturally Aspirated, VIN V"
• 1982-1982: Limited; 6 Cyl 4.3L; "DIESEL, FI, Naturally Aspirated, VIN V"

SERPENTINE BELT -- 102.56 in. effective length, 0.82 in. top width, 6 ribs; A high quality, OE replacement serpentine belt; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1982-1994 Buick Regal submodels:

• 1990-1994: Base; 6 Cyl 3.8L;
• 1990-1994: Custom; 6 Cyl 3.8L;

• 1990-1994: Gran Sport; 6 Cyl 3.8L;

• 1990-1994: Limited; 6 Cyl 3.8L;

• 1982-1982: Base; 6 Cyl 4.3L;

• 1982-1982: Limited; 6 Cyl 4.3L;

Fits 4 more submodels. (Show all) Show less info

SERPENTINE BELT -- 102 in. effective length, 0.82 in. top width, 6 ribs; Multiple accessory; A high quality, OE replacement serpentine belt; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1983-1995 Buick Regal submodels:

• 1992-1995: Base; 6 Cyl 3.8L;
• 1992-1995: Custom; 6 Cyl 3.8L;

• 1992-1995: Gran Sport; 6 Cyl 3.8L;

• 1992-1995: Limited; 6 Cyl 3.8L;

• 1983-1984: Base; 6 Cyl 4.3L;

• 1983-1984: Limited; 6 Cyl 4.3L;

Fits 4 more submodels. (Show all) Show less info