Toyota Crown Oil Filter

FRAM EXTRA GUARD OIL FILTER, ORANGE -- 5.14 in. height, 3/4-16 in. thread ID, 3.8 in. OD, 2.42 in. gasket ID, 2.8 in. gasket OD, 0.2 in. gasket thickness, full-flow lube spin-on, canister style, base gasket usage, 12 relief valve setting psi, 20 microns smallest particle filtered; With anti-drain valve and filter bypass relief valve; Features cellulose and synthetic glass media that provides three times more engine protection than the average of leading economy oil filter; Meets and exceeds all engine and auto manufacturers' warranties; The sure grip no-slip feature guarantees superior handling control no matter how oily things might get; With Fram limited warranty.

Fits the following 1967-1972 Toyota Crown submodels:

• 1971-1972: Base; 6 Cyl 2.6L; "4M"
• 1967-1971: Base; 6 Cyl 2.3L; "2M"

BECK-ARNLEY OIL FILTER -- A High Quality, Direct-Fit OEM Replacement Oil Filter

Fits the following 1968-1972 Toyota Crown submodels:

• 1971-1972: Base; 6 Cyl 2.6L; "4M"
• 1968-1970: Base; 6 Cyl 2.3L; "2M"

K&N Wrench-Off Oil Filter

Treat your vehicle to K&N's premium oil filter - the Wrench-Off! Designed to handle high flow rates while maintaining outstanding oil filtration and built with thick canister walls for extra strength and durability. Best of all, it was developed with a 1-inch nut welded to the top for easy install and removal.

Features

• Exposed nut designed for easy removal
• Heavy-Duty Construction
• Traps 99% of harmful contaminants
• High flow design helps reduce engine drag
• Anti-drainback valve to eliminate dry starts
• Leak-proof double roll seam
• Can be used with the latest synthetic motor oils
• With K&N limited warranty

Fits the following 1967-1972 Toyota Crown submodels:

• 1971-1972: Base; 6 Cyl 2.6L;
• 1967-1970: Base; 6 Cyl 2.3L;

HASTINGS OIL FILTER -- Full flow lube spin-on; 3/4-16 thread, 3-11/16 in. OD, 5-13/32 in. L; Includes 1 gasket, anti-drainback valve, and 8 PSID by-pass valve; A high quality, direct fit OE replacement oil filter; Replaces OE part numbers B7A-6714-A, FL1A, and B2.

Fits the following 1968-1970 Toyota Crown submodels:

• 1968-1970: Base; 6 Cyl 2.3L; "GAS, CARB, 2M, Naturally Aspirated"

AC DELCO DURAGUARD ENGINE OIL FILTER -- 115.1 mm long; Made of cellulose and synthetic fibers that traps contaminant particles as small as 25 microns smaller than the human hair; Provides the best overall mix of filtration performance, flow management and product durability; Designed and developed to meet or exceed most application requirements; A high quality, direct fit OE replacement engine oil filter; With 12-month or 12,000-mile AC Delco warranty.

Fits the following 1968-1970 Toyota Crown submodels:

• 1968-1970: Base; 6 Cyl 2.3L; "GAS, CARB, 2M, Naturally Aspirated"

BOSCH PREMIUM OIL FILTER -- Constructed using Bosch's exclusive FILTECH media technology that offers 42 percent larger filtering area than conventional filters; Features stronger steel baseplate and housing, silicone anti-drain back valve, high lubricity design, and double-locked rolled seam; Screens out more harmful contaminants for greater engine protection; Prevents warpage, leaks, and poor fit; Ensures a supply of clean oil when you start your car; Provides a tight seal, yet an easy removal; Forms a leak free canister.

Fits the following 1967-1972 Toyota Crown submodels:

• 1971-1972: Base; 6 Cyl 2.6L; "GAS, CARB, 4M, Naturally Aspirated"
• 1971-1972: Base; 6 Cyl 2.6L; "GAS, CARB, 4M, Naturally Aspirated, VIN M"

• 1967-1970: Base; 6 Cyl 2.3L; "GAS, CARB, 2M, Naturally Aspirated"

Fits 1 more submodels. (Show all) Show less info