Acura TL Performance Pulleys

JET PERFORMANCE V-FORCE PLUS MODULE

Features and Benefits

• Designed around a 20 MHz RISC processor
• Optimizes ignition advance and fuel maps for optimum horsepower and drivability
• Designed for the performance enthusiast who wants improved performance, acceleration and the ability to monitor vehicle information
• Allows the user to select from 14 different screens to monitor throttle position, mass air flow, manifold pressure, fuel economy and air/fuel ratio
• Replaces part number 67001
  
  

Notes: 50-state legal

Fits the following 1995-2012 Acura TL submodels:

• 1995-2012: All Submodels; All Engines;

DAYCO BELT TENSIONER PULLEY -- 76 mm diameter, 31 mm W, 17 mm bearing ID, 06 rib maximum belt W, 1-bearing, flat steel without flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.

Fits the following 2004-2012 Acura TL submodels:

• 2011-2012: Base; 6 Cyl 3.5L; "J35Z6"
• 2011-2012: SH-AWD; 6 Cyl 3.7L; "J37A4"

• 2009-2010: Base; 6 Cyl 3.5L; "GAS, FI, J35Z6, Naturally Aspirated"

• 2009-2010: SH-AWD; 6 Cyl 3.7L; "GAS, FI, J37A4, Naturally Aspirated"

• 2007-2008: Type-S; 6 Cyl 3.5L; "GAS, FI, J35A8, Naturally Aspirated"

• 2004-2008: Base; 6 Cyl 3.2L; "GAS, FI, J32A3, Naturally Aspirated"

Fits 4 more submodels. (Show all) Show less info

Fits the following 1995-1998 Acura TL submodels:

• 1996-1998: Base; 5 Cyl 2.5L;
• 1996-1998: Premium; 5 Cyl 2.5L;

• 1995-1995: All Submodels; All Engines;

Fits 1 more submodels. (Show all) Show less info

GATES DRIVEALIGN IDLER PULLEY -- 76 mm outside diameter, 30.5 mm width, 6-rib V-ribbed belt type; Steel material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; Its robust and high quality pulley materials withstand contaminants, while its superior bearings outperform OE idler pulleys; Guaranteed to last up to 3 times longer than competitive aftermarket tensioners.

Fits the following 2004-2012 Acura TL submodels:

• 2009-2012: Base; 6 Cyl 3.5L; "GAS"
• 2009-2012: SH-AWD; 6 Cyl 3.7L; "GAS"

• 2007-2008: Type-S; 6 Cyl 3.5L; "GAS"

• 2004-2008: Base; 6 Cyl 3.2L; "GAS"

Fits 2 more submodels. (Show all) Show less info

Dorman Products
Dorman Products, Inc. is a leading supplier of automotive products and hardware to the automotive aftermarket.

Fits the following 2005-2008 Acura TL submodels:

• 2005-2008: All Submodels; All Engines;

4-SEASONS IDLER PULLEY -- 1 in. belt width, flat groove, 3.5 in. pulley diameter, serpentine belt type, back idler; A high quality, direct fit OE replacement idler pulley.

Fits the following 1999-2003 Acura TL submodels:

• 1999-2003: All Submodels; All Engines;

AC DELCO BELT IDLER PULLEY, STEEL -- 76 x 17 x 30.5 mm, smooth/backside pulley type; A high quality, OE replacement belt idler pulley; Replaces OE number 88909587; With 12-month or 12,000-mile AC Delco warranty.

Fits the following 2004-2012 Acura TL submodels:

• 2009-2012: Base; 6 Cyl 3.5L; "GAS, FI, J35Z6, Naturally Aspirated"
• 2009-2012: SH-AWD; 6 Cyl 3.7L; "GAS, FI, J37A4, Naturally Aspirated"

• 2007-2008: Type-S; 6 Cyl 3.5L; "GAS, FI, J35A8, Naturally Aspirated"

• 2004-2008: Base; 6 Cyl 3.2L; "GAS, FI, J32A3, Naturally Aspirated"

Fits 2 more submodels. (Show all) Show less info

HAYDEN IDLER/TENSIONER PULLEY, STEEL -- 1 in. belt W, 3.25 in. pulley diameter, 3.562 in. OD, 0.67 in. ID, serpentine belt type, flat groove, back idler pulley type; Manufactured using the highest quality standards; Meets or exceeds OE specifications; Assists in belt routing and tensioning within the accessory drive system.

Fits the following 1999-2003 Acura TL submodels:

• 1999-2003: All Submodels; All Engines;

BECK ARNLEY TIMING BELT IDLER PULLEY -- A high quality, direct-fit OE replacement timing belt idler pulley.

Fits the following 1999-2003 Acura TL submodels:

• 2002-2003: Type-S; 6 Cyl 3.2L;
• 1999-2003: Base; 6 Cyl 3.2L;

GMB
GMB is one of the world's largest designers and manufacturers of automotive service products. GMB offers OE quality water pumps, universal joints, tensioner idler bearings and chassis parts for most European, Asian and Domestic vehicles.

Fits the following 2004-2011 Acura TL submodels:

• 2004-2011: All Submodels; All Engines;

Koyo Seiko Co., Ltd
Koyo Seiko Co., Ltd. (JTECT Corporation) designs, manufacturers and supplies a wide range of ball and roller bearings to the world's leading automotive manufacturers.

Fits the following 1999-2003 Acura TL submodels:

• 1999-2003: All Submodels; All Engines;

PERFORMANCE RADIATOR, ALUMINUM CORE/PLASTIC TANK, 1-ROW, NEW -- 15.75 x 28.06 x 0.63 in. core size, 1.25 in. inlet and outlet size, 8.6 mm tube pitch; With 12.81 in. concentric transmission oil cooler; A high quality, OE replacement radiator; With Performance Radiator limited warranty.

Fits the following 1999-2001 Acura TL submodels:

• 1999-2001: Base; 6 Cyl 3.2L;

KYB AGX SHCK ABSORBERS AND STRUT ASSEMBLIES

These KYB AGX Shock Absorbers and Strut Assemblies permit the driver to regulate damping to match varying ride conditions immediately. In just few seconds, adjust the level for street, cruising, or high-speed touring. Offering excellent performance with plenty of selections, choose four to eight damping rates with no components to eliminate or springs to compress.

Fits the following 1999-2003 Acura TL submodels:

• 1999-2003: All Submodels; All Engines;

EBC SIGNATURE KIT - STAGE 4 BRAKE DISC AND PAD KIT

Experience improved over-all braking with EBC Signature Kit Stage 4 Series. These kits provide an ideal blend of premium rotors and high friction pads for performance braking without the noise.

EBC USR Series Sports Slotted Brake Disc Details:

• Narrower multi slot design promotes effective dirt, gas, water, and debris expulsion
• Machined at a progressive angle for quiet operation
• Effectively promotes flat and parallel pad wear

EBC Redstuff Brake Pad Details:

• Exclusive EBC Brake-In coating
• Resists rotor vibration and fade under load
• Low dust
• Chamfered, shimmed, and slotted
• Delivers high initial brake effect

Fits the following 1996-1998 Acura TL submodels:

• 1996-1998: Base; 6 Cyl 3.2L;
• 1996-1998: Premium; 6 Cyl 3.2L;

Powerstop 1-Click Street Warrior Z26 Brake Kits were designed with the muscle car or tuner enthusiast in mind. It increases stopping power up to 20% over stock brake parts. The Carbon Fiber/Ceramic Matrix Brake Pad formula resists fade under the most demanding driving conditions. The Drilled and Slotted rotors provide added performance over OEM brake rotors through their Cross-Drilled construction and extra cooling benefits. The slots in the brake rotors wipe away gas and debris between the pad and the rotor to enhance pad bite.

• Proprietary Z26 Carbon Fiber/Ceramic Matrix brake pads enhance stopping power
• Each Powerstop kit includes necessary brake sensors and hardware where needed – up to a $100 value you’ll only find here! (see item details for specifics)
• Quiet, low-dust copper-free formula
• Up to 20 percent more stopping power than OEM equipment and other brands
• Recommended for performance street driving
• Adds extra stopping power to tame vehicles that have been enhanced with power adders or larger wheels
• Big Brake Performance without the Big Brake Kit price tag
• Powerstop has done the engineering so you don't have to - they match components to maximize performance

Fits the following 1996-1996 Acura TL submodels:

• 1996-1996: Base; 6 Cyl 3.2L;
• 1996-1996: Premium; 6 Cyl 3.2L;