Dodge D350 Performance Pulleys

JET PERFORMANCE STAGE 1 POWER CONTROL MODULE -- Adds up to 25 h.p.; Improves throttle response, acceleration and low end torque; Allows you to gain maximum performance from point by point air/fuel ratio, ignition advance and various other tuning points; Features dynamic spectrum tuning that provides power gains across the entire power band not just at full throttle; Its fuel and timing curves are modified for optimal performance and mileage using less expensive, lower octane fuels; For stock or mildly modified vehicles; Easy plug-in installation; With Jet Performance limited warranty.

Notes: 49-state legal, not for sale or use in California; Cannot be shipped to California addresses.

Fits the following 1989-1989 Dodge D350 submodels:

• 1989-1989: Base; 8 Cyl 5.9L;

DAYCO BELT TENSIONER PULLEY -- 76 mm diameter, 31 mm W, 17 mm bearing ID, 06 rib maximum belt W, 1-bearing, flat steel without flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.

Fits the following 1993-1993 Dodge D350 submodels:

• 1993-1993: Base; 8 Cyl 5.9L; "GAS, FI, Naturally Aspirated, VIN 5"

GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 90mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures

Fits the following 1993-1993 Dodge D350 submodels:

• 1993-1993: Base; 8 Cyl 5.9L; "GAS"

DORMAN POWER STEERING PULLEY, STEEL, BLACK, SOLD INDIVIDUALLY -- For serpentine type belt; 5.98 in. outside diameter; 0.75 in. inside diameter; 1.30 in. width; This high quality power steering pump pulley directly replaces OE number 53005614.

Fits the following 1992-1993 Dodge D350 submodels:

• 1992-1993: Base; 6 Cyl 5.9L; "DIESEL, FI, Turbocharged, VIN C"
• 1992-1993: Base; 8 Cyl 5.9L; "GAS, FI, Naturally Aspirated, VIN 5"

• 1992-1993: Base; 8 Cyl 5.9L; "GAS, FI, Naturally Aspirated, VIN Z"

Fits 1 more submodels. (Show all) Show less info

4-SEASONS IDLER PULLEY -- 3/8 in. belt width, 3-3/4 in. pulley diameter, V-belt type; A high quality, direct fit OE replacement idler pulley; With 90-day 4-Seasons warranty.

Fits the following 1981-1983 Dodge D350 submodels:

• 1982-1983: Base; 8 Cyl 5.2L;
• 1982-1983: Base; 8 Cyl 5.9L;

• 1981-1981: All Submodels; All Engines;

Fits 1 more submodels. (Show all) Show less info

AC DELCO IDLER PULLEY -- A high quality, OE replacement idler pulley; Replaces OE number 19190148; With 12-month or 12,000-mile AC Delco limited warranty.

Fits the following 1993-1993 Dodge D350 submodels:

• 1993-1993: Base; 8 Cyl 5.9L; "GAS, FI, Naturally Aspirated, VIN 5"
• 1993-1993: Base; 8 Cyl 5.9L; "GAS, FI, Naturally Aspirated, VIN Z"

HAYDEN IDLER/TENSIONER PULLEY, PLASTIC -- 1 in. belt W, 3.125 in. pulley diameter, 3 in. OD, 0.67 in. ID, serpentine belt type, flat groove, 7-groove pulley type; Manufactured using the highest quality standards; Meets or exceeds OE specifications; Assists in belt routing and tensioning within the accessory drive system.

Fits the following 1993-1993 Dodge D350 submodels:

• 1993-1993: Base; 8 Cyl 5.9L;

MR GASKET ELECTRIC WATER PUMP LARGE PULLEY -- A replacement large pulley for Drive kit part number 4333 and 4433; Fits water pump; With Mr. Gasket's limited 90-day warranty.

Fits the following 1981-1993 Dodge D350 submodels:

• 1989-1993: Base; 8 Cyl 5.9L;
• 1981-1988: All Submodels; All Engines;

PERFORMANCE RADIATOR, ALL ALUMINUM, NEW, 2-ROW -- 29 x 18.5 x 2.25 in. core size, 1.5 in. inlet size, 1.75 in. outlet size; With 7-plate 11.5 in. transmission oil cooler; A high quality, OE replacement radiator; With Performance Radiator limited warranty.

Fits the following 1981-1993 Dodge D350 submodels:

• 1981-1993: Base; 8 Cyl 5.9L;
• 1981-1983: Base; 8 Cyl 5.2L;

SLP PERFORMANCE PARTS HOOD SCOOP, ABS PLASTIC, UNPAINTED, SOLD INDIVIDUALLY -- 25.5 in. length; 20 in. front width; 25.25 in. back width; 1-7/8 in. height; Includes tape, hardware, and installation instructions; Made of OEM-quality composite ABS material that is UV stable to prevent distortion due to heat and cold; Designed to enhance the aggressive looks of your vehicle; Paintable to match the color of your vehicle.

Fits the following 1981-1993 Dodge D350 submodels:

• 1981-1993: All Submodels; All Engines;

KYB GAS-A-JUST SHOCK ABSORBERS AND STRUT ASSEMBLIES

KYB Gas-A-Just Shocks and Struts automatically adjusts to any driving conditions and make your vehicle responsive to your control. These are monotube-designed dampeners ideal to use by cars, vans, SUVs, and trucks.

Disclaimer: KYB now manufactures silver Gas-a-Just Shock Absorbers to replace the white versions. Performance and quality of Silver Gas-a-Just Shock Absorbers do not vary from those of their White counterparts. For purposes of identification, boxes of silver shock absorbers have been tagged with yellow labels, while those of white shock absorbers have been tagged with white.

Fits the following 1981-1993 Dodge D350 submodels:

• 1981-1993: Base; All Engines;

GIBSON SWEPT SIDE EXHAUST SYSTEM

Gibson's Swept Side exhaust system is their best performing system in the market. It offers maximum increase in horsepower, towing power and torque at a cost-effective price. It improves fuel economy and features CNC mandrel-bent tubing that maintains constant exhaust flow for outstanding performance. This system delivers a deep and aggressive exhaust tone ideal for use on towing and general applications.

Specifications

• Cat-back exhaust system
• Exit behind the rear tire
• 3 in. main piping diameter
• 3 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Single 4 in. polished stainless steel with round shape, slash cut, and non-rolled edge design

Features

• Mandrel-bent tubing

<

Heavy duty enough for off-road use

Bolt-on attachment style

Fits the following 1989-1993 Dodge D350 submodels:

• 1989-1993: Base; 6 Cyl 5.9L;

GABRIEL ULTRA SHOCK ABSORBERS AND STRUT ASSEMBLIES

Gabriel Ultra Twin-tube Shock Absorbers and Strut Assemblies have 1 3/8" bore pistons (in most applications) and bonded iron structures safeguarding a long lasting durability. The Orifice Control Disk inducted with nine stages of valving casts oil-flow consistency and prevents oil flooding. Built with a larger bulged tube (varies in application) to support proper heat dissipation. To minimize friction, Ultra Shocks are created with single-lip oil seals and these parts also exercise component durability by having sintered iron pistons. Highlighted features including leak-proof piston seals, rod guides, single-lip oil seal and super-finished chrome piston rods are engineered using their developed G-Force Technology that was pioneered by Gabriel to achieve superb control, safety and vehicle performance.

Item Details:

• 5.78 in. damper travel

Fits the following 1981-1993 Dodge D350 submodels:

• 1981-1993: All Submodels; All Engines;

HAWK PERFORMANCE HPS BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Increase the braking power of your street legal performance vehicle by 20-40 percent with Hawk High Performance Street (HPS) Brake Pads! The unique ferro-carbon compound of these pads has a higher coefficient of friction over OE pads and has a higher resistance to fade over standard aftermarket replacements - giving you increased stopping power, reduced dust production, and longer pad and rotor life.

Specifications:

• 0.68 in. thickness

Features:

• Asbestos-free
• Low-dust and long-wear ferro-carbon compound
• Higher coefficient of friction over stock brake pads
• Higher resistance to brake fade than standard replacements
• High friction/torque hot or cold
• Virtually noise free
• Prolonged rotor life

Fits the following 1984-1993 Dodge D350 submodels:

• 1984-1993: All Submodels; All Engines;

BENDIX TITANIUMETALLIC II BRAKE PADS, SEMI-METALLIC, 2-WHEEL SET

Enjoy unmatched braking performance right out of the box with TitaniuMetallic II brake pads. These boast a completely reformulated TitaniuMetallic II blue coating that cuts down the required break-in period from 200 stops to just 50 stops, assuring greater stopping power sooner. They also have an all-new semi-metallic pad formulation that provides shorter stopping distances with less pedal effort. Additionally, these have noise-reducing shims and match OE pads in terms of design (chamfered and/or slotted), configuration (riveted and/or integrally-molded) and included components (attaching hardware and/or wear sensors).

Features:

• Asbestos-free
• Riveted
• Non-chamfered
• Non-slotted
• Semi-metallic formulation provides superior braking performance
• TitaniuMetallic II coating shortens the break-in period
• Greater stopping power from the very first stop

This brake pad set comes with shims.

Fits the following 1981-1993 Dodge D350 submodels:

• 1989-1993: Base; 6 Cyl 5.9L; "DIESEL"
• 1981-1993: Base; 8 Cyl 5.9L;

• 1981-1983: Base; 8 Cyl 5.2L;

Fits 1 more submodels. (Show all) Show less info