Toyota Mark II P/S Hose

GATES VULCO FLEX II COOLANT HOSE --15 in. centerline L, 1.25 in. ID; With heat and ozone resistant cover; Designed to bend in almost any directions; Replicates the angels of original equipment hose; Features improved sealing surface for greater leak resistance and increased flexibility; A high quality, direct fit OE replacement coolant hose; Rated for SAE 20R5 class D-2 performance; Replacing of all clamps when replacing the hose is recommended; Do not use for fuel or oil transfer applications.

Fits the following 1972-1976 Toyota Mark II submodels:

• 1973-1976: Base; 6 Cyl 2.6L; "GAS"
• 1972-1972: Base; 6 Cyl 2.3L; "GAS"

PLEWS-EDELMANN BULK POWER STEERING HOSE -- Trim to fit; 3/8 in. ID, 25 ft. length; Does not include end fittings; This is a high quality power steering hose.

Fits the following 1972-1976 Toyota Mark II submodels:

• 1973-1976: Base; 6 Cyl 2.6L; "GAS"
• 1972-1972: Base; 6 Cyl 2.3L; "GAS"

DAYCO FLEX RADIATOR HOSE -- Flex Radiator Hose, Precision Molded In Standard Lengths, This Flex Radiator Hose Is Designed To Replace Straight Or Molded Radiator Hoses, The Knitted Reinforcement And Synthetic EPDM Construction Meets Requirements, Preventing Splitting, Ballooning, And Resisting Environmental Elements, Coolants, And Temperature, Provides Excellent Hose Flexibility Without Flattening Or Collapse

Fits the following 1973-1974 Toyota Mark II submodels:

• 1973-1974: Base; 6 Cyl 2.6L; "GAS, CARB, 4M, Naturally Aspirated"
• 1973-1974: Base; 6 Cyl 2.6L; "GAS, CARB, 4M, Naturally Aspirated, VIN M"

BECK ARNLEY POWER STEERING HOSE, RETURN/LOW PRESSURE SIDE, SOLD INDIVIDUALLY -- Cut-to-length; This is a high quality OE replacement power steering return/low pressure hose.

Fits the following 1972-1976 Toyota Mark II submodels:

• 1972-1976: All Submodels; All Engines;

AC DELCO POWER STEERING RETURN HOSE, SOLD INDIVIDUALLY -- Does not include end fittings; This high quality power steering return hose replaces OE numbers 19147363, 36R18624 or 89055923.

Fits the following 1972-1976 Toyota Mark II submodels:

• 1973-1976: Base; 6 Cyl 2.6L; "GAS, CARB, 4M, Naturally Aspirated, VIN M"
• 1973-1974: Base; 6 Cyl 2.6L; "GAS, CARB, 4M, Naturally Aspirated"

• 1972-1972: Base; 6 Cyl 2.3L; "GAS, CARB, 2M, Naturally Aspirated"

Fits 1 more submodels. (Show all) Show less info

HAYDEN TRANSMISSION COOLER HOSE, RUBBER, BLACK, SOLD INDIVIDUALLY -- 0.344 in. hose size, 0.340 in. hose ID, 4.5 ft. L, 500 psi maximum operating pressure; A high quality, direct fit OE replacement oil cooler hose.

Fits the following 1972-1972 Toyota Mark II submodels:

• 1972-1972: Base; 4 Cyl 2.0L;

DORMAN CARBURETOR PRE-HEATER HOSE -- 1.56 in. diameter, 21 in. length; Made of paper and aluminum material; A high quality, direct fit OE replacement carburetor pre-heater hose.

Fits the following 1975-1976 Toyota Mark II submodels:

• 1975-1976: Base; 6 Cyl 2.6L; "GAS, CARB, 4M, Naturally Aspirated, VIN M"