Chevy P30 Seat Belt

COVERKING CUSTOM SEAT COVER, CR-GRADE NEOPRENE, BLACK SIDES AND TAN INSERT

Get the looks and comfort of Neoprene without the waterproof lining. These seat covers look virtually identical to CR-Grade Neoprene at a far more economical price.

Features:

• TS16949 and QS-9000 quality certified
• A strong, durable, and inexpensive alternative to neoprene seat covers
• Protects your original upholstery from damage, covers up any existing damage, and provides an active, sporty, and vibrant look to your vehicle's interior
• Fits nearly as good as the original upholstery
• Easy to clean and install
• Made in the USA

Notes:

• For high back bucket seat
• For vehicles with built-in headrest
• Will not fit vehicles with armrest

Fits the following 1996-1999 Chevrolet P30 submodels:

• 1996-1999: Base; All Engines;

AUTOMATIC BELT TENSIONER -- 7-groove; Serpentine type; A high quality, OE replacement automatic belt tensioner; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1996-1999 Chevrolet P30 submodels:

• 1998-1999: Base; 8 Cyl 7.4L; "GAS, FI, Naturally Aspirated, VIN B"
• 1996-1999: Base; 6 Cyl 4.3L; "GAS, FI, Naturally Aspirated, VIN W"

• 1996-1999: Base; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN R"

• 1996-1999: Base; 8 Cyl 7.4L; "GAS, FI, Naturally Aspirated, VIN J"

• 1996-1997: Base; 8 Cyl 7.4L; "GAS, FI, Naturally Aspirated, VIN N"

• 1996-1996: Base; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"

Fits 4 more submodels. (Show all) Show less info

DAYCO BELT TENSIONER -- Automatic Belt Tensioner, The Featured Patented Flat Spring Design Reduces The Risk Of Accessory Bearing Failure, Reduces The Risk Of Belt Squeal And Slippage, Or Poor Accessory Performance Caused By Low Tension, The Flat Spring Is Coated To Resist Rust, Heavy Duty Cast Aluminum Spring Case Resists Cracking, Heavy-Duty Cast Aluminum Arm Offers Additional Strength And Less Distortion

Fits the following 1994-1999 Chevrolet P30 submodels:

• 1994-1999: Base; 8 Cyl 6.5L; "DIESEL, FI, Naturally Aspirated, VIN Y"
• 1994-1999: Base; 8 Cyl 6.5L; "DIESEL, FI, Turbocharged, VIN F"

GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 70 mm outside diameter, 25 mm width, 6 grooves, 6-rib V-ribbed belt type; Thermoplastic material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.

Fits the following 1996-1999 Chevrolet P30 submodels:

• 1996-1999: Base; 6 Cyl 4.3L; "GAS"
• 1996-1999: Base; 8 Cyl 5.7L; "GAS"

• 1996-1999: Base; 8 Cyl 7.4L; "GAS"

Fits 1 more submodels. (Show all) Show less info

DORMAN AUTOMATIC BELT TENSIONER -- Serpentine Type; A high quality, direct fit OE replacement automatic belt tensioner; With lifetime Dorman limited warranty.

Fits the following 1996-1999 Chevrolet P30 submodels:

• 1998-1999: Base; 8 Cyl 7.4L; "GAS, FI, Naturally Aspirated, VIN B"
• 1996-1999: Base; 6 Cyl 4.3L; "GAS, FI, Naturally Aspirated, VIN W"

• 1996-1999: Base; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN R"

• 1996-1999: Base; 8 Cyl 7.4L; "GAS, FI, Naturally Aspirated, VIN J"

• 1996-1997: Base; 8 Cyl 7.4L; "GAS, FI, Naturally Aspirated, VIN N"

• 1996-1996: Base; 8 Cyl 5.7L; "GAS, FI, Naturally Aspirated, VIN K"

Fits 4 more submodels. (Show all) Show less info

AC DELCO DRIVE BELT TENSIONER ASSEMBLY, SOLD INDIVIDUALLY -- A high quality, OE replacement drive belt tensioner assembly; Replaces OE number 88909608; With 12-month or 12,000-mile AC Delco warranty.

Fits the following 1994-1999 Chevrolet P30 submodels:

• 1994-1999: Base; 8 Cyl 6.5L; "DIESEL, FI, Naturally Aspirated, VIN Y"
• 1994-1999: Base; 8 Cyl 6.5L; "DIESEL, FI, Turbocharged, VIN F"

HAYDEN AUTOMATIC BELT TENSIONER, SOLD INDIVIDUALLY -- OE quality for long life and easy replacement; Maintains constant tension on the belt to extend both belt and accessory drive bearing life.

Fits the following 1994-1999 Chevrolet P30 submodels:

• 1994-1999: Base; 8 Cyl 6.5L;

4 SEASONS ACCESSORY BELT IDLER PULLEY

4-Seasons Accessory Belt Idler Pulley is the most suitable replacement if it's time for you to deal with your engine system. It matches the exact design of the original accessory belt idler pulley that was installed with your car or truck as it was sent forth from the assembly line so you could be sure of its general performance.

Fits the following 1987-1988 Chevrolet P30 submodels:

• 1987-1988: All Submodels; All Engines;

ContiTech AG
ContiTech AG is a global manufacturer and an OE supplier of rubber and plastic components that include; drive belts, hoses and functional parts.

Cogged

Fits the following 1985-1995 Chevrolet P30 submodels:

• 1991-1995: Base; 6 Cyl 4.3L;
• 1985-1995: Base; 8 Cyl 5.7L;

• 1985-1990: Step-Van; 8 Cyl 5.7L;

Fits 1 more submodels. (Show all) Show less info

MALLORY DISTRIBUTOR DRIVE BELT -- Machined To Exact Tolerances, Features Large Diameter Cap Offered In The High Performance Industry And A Specially Designed Counterbalanced Rotor That Interlocks With The Adapter Shield To Eliminate Arcing And Crossfiring, Comes With A Spark Plug Wire Retainer Designed To Ensure Positive Spark Plug Wire Connections Under Even The Most Severe Racing Conditions, For Use With The %X93Jesel%X94 Camshaft Belt Drive Kit, Fits Distributor Kits 20900 And 20901, With Manufacturer's 1-Year Limited Warranty

Fits the following 1975-1987 Chevrolet P30 submodels:

• 1982-1987: Base; 8 Cyl 6.2L;
• 1982-1987: Step-Van; 8 Cyl 6.2L;

• 1975-1987: Base; 6 Cyl 4.8L;

• 1975-1987: Base; 8 Cyl 5.7L;

• 1975-1987: Base; 8 Cyl 7.4L;

• 1975-1987: Step-Van; 6 Cyl 4.8L;

• 1975-1987: Step-Van; 8 Cyl 5.7L;

• 1975-1987: Step-Van; 8 Cyl 7.4L;

• 1976-1976: Base; 8 Cyl 6.6L;

• 1976-1976: Step-Van; 8 Cyl 6.6L;

Fits 8 more submodels. (Show all) Show less info

Fits the following 1989-1995 Chevrolet P30 submodels:

• 1990-1995: Base; 6 Cyl 4.3L;
• 1990-1990: Step-Van; 6 Cyl 4.3L;

• 1989-1990: Base; 8 Cyl 5.7L;

• 1989-1990: Step-Van; 8 Cyl 5.7L;

Fits 2 more submodels. (Show all) Show less info

Fits the following 1989-1995 Chevrolet P30 submodels:

• 1990-1995: Base; 6 Cyl 4.3L;
• 1990-1990: Step-Van; 6 Cyl 4.3L;

• 1989-1990: Base; 8 Cyl 5.7L;

• 1989-1990: Step-Van; 8 Cyl 5.7L;

Fits 2 more submodels. (Show all) Show less info

PLASTICOLOR WEATHERPRO FLOOR MATS, PLASTISOL, BLACK, SET OF 2

For floor mats that can make a statement, Plasticolor Floor Mats are the best choice. These floor mats were made with quality and uncompromising design for everyone, from a Ford enthusiast to a Betty Boop collector.

Features:

• With licensed Chevy Bowtie logo
• Made of thick, high quality plastisol
• Designed to keep dirt, mud, snow, and other materials from damaging your vehicle's floor
• Ultimate protection for active lifestyles
• Trimmed to fit most cars and trucks
• Can be easily cleaned with soap and water

Fits the following 1975-1999 Chevrolet P30 submodels:

• 1975-1999: Base; All Engines;
• 1975-1990: Step-Van; All Engines;