Ford E-350 Seat Belt

COVERKING CUSTOM SEAT COVER, CR-GRADE NEOPRENE, BLACK SIDES AND CHARCOAL INSERT

Get the looks and comfort of Neoprene without the waterproof lining. These seat covers look virtually identical to CR-Grade Neoprene at a far more economical price.

Features:

• TS16949 and QS-9000 quality certified
• A strong, durable, and inexpensive alternative to neoprene seat covers
• Protects your original upholstery from damage, covers up any existing damage, and provides an active, sporty, and vibrant look to your vehicle's interior
• Fits nearly as good as the original upholstery
• Easy to clean and install
• Made in the USA

Notes:

• For bucket seat
• Fits seats with highback backrest and 1 armrest per seat

Fits the following 2003-2003 Ford E-350 submodels:

• 2003-2003: All Submodels; All Engines;

CALTREND NEOSUPREME CUSTOM SEAT COVER

• Made of soft yet tough polyester with ultra soft foam backing for maximum comfort
• Custom tailored on a sophisticated CAD/CAM computer system for a perfect fit
• Can accommodate side-impact airbags
• Easy installation with no tools required
• Backed by CalTrend's 3-year limited warranty
• For seats with armrest

CalTrend's NeoSupreme seat covers suit your outdoor lifestyle with its sporty appearance. These seat covers last for a long time with its high UV and fade resistance. They are specially engineered to display a close resemblance to neoprene but without the drawbacks such as drying, cracking, and fading. Designed with reinforced seams, NeoSupreme seat covers will surely provide protection to your car seat while enhancing the appearance of your vehicle's interior.

Fits the following 2003-2003 Ford E-350 submodels:

• 2003-2003: All Submodels; All Engines;

DAYCO NO SLACK AUTOMATIC BELT TENSIONER -- Designed to maintain constant tension on serpentine belt drives; Features a patented flat spring design that provides less operating range variations in tension, reduces the risk of premature accessory bearing failure, and lessens the risk of belt squeal and slippage or poor accessory performance; Designed with a Teflon strip wound within the spring to resist abrasion; A heavy-duty cast aluminum arm offers additional strength and less distortion, an aluminum retainer ring locks the spring case and arm together and seals against corrosion, a thermoplastic rubber spring slot plug keeps out harmful contaminants, and a rubber O-ring seals against dust and grime; The lubricated nylon pivot tube bushing and spring bushing promote quieter performance, while the zinc coated mounting bolt resists rust and is concentric for a more even degree of constant tension.

Fits the following 2003-2003 Ford E-350 submodels:

• 2003-2003: Base; 8 Cyl 7.3L; "DIESEL, FI, Turbocharged, VIN F"

ACCESSORY BELT TENSIONER PULLEY -- 3 in. OD; 1.22 in. W; Flat; With steel flange; A high quality, OE replacement accessory belt tensioner pulley; Backed by 1-year, unlimited-mileage warranty.

Fits the following 2003-2003 Ford E-350 submodels:

• 2003-2003: Base; 8 Cyl 5.4L; "CNG, FI, VIN M"
• 2003-2003: Base; 8 Cyl 5.4L; "GAS, FI, VIN L"

Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.

Fits the following 2003-2003 Ford E-350 submodels:

• 2003-2003: Base; 10 Cyl 6.8L;

DORMAN AUTOMATIC BELT TENSIONER -- Serpentine Type; A high quality, direct fit OE replacement automatic belt tensioner; With lifetime Dorman limited warranty.

Fits the following 2003-2003 Ford E-350 submodels:

• 2003-2003: Base; 10 Cyl 6.8L; "GAS, FI, Naturally Aspirated, VIN S"
• 2003-2003: Base; 8 Cyl 5.4L; "CNG, FI, Naturally Aspirated, VIN M"

• 2003-2003: Base; 8 Cyl 5.4L; "GAS, FI, Naturally Aspirated, VIN L"

Fits 1 more submodels. (Show all) Show less info

MOTORCRAFT BELT TENSIONER -- Designed to perform in harsh underhood environment and provides less operating range variation under tension, helping to minimize premature failure and poor performance; Features a cast-aluminum spring case and arm to resist cracking and fatigue; Sealed-for-life bearing offers long service life; Easy to install; Replaces OE part number F7TZ6B209EA; With Motorcraft's limited 12-month or 12,000-mile warranty.

Fits the following 2003-2003 Ford E-350 submodels:

• 2003-2003: Base; 10 Cyl 6.8L;

AC DELCO BELT TENSIONER, STEEL -- 2.99 x 0.67 x 1.2 in.; A high quality, direct fit OE replacement belt tensioner; Replaces OE number 19111827; With 12-month or 12,000-mile AC Delco warranty.

Fits the following 2003-2003 Ford E-350 submodels:

• 2003-2003: Base; 10 Cyl 6.8L; "GAS, FI, Naturally Aspirated, VIN S"
• 2003-2003: Base; 8 Cyl 5.4L; "CNG, FI, Naturally Aspirated, VIN M"

• 2003-2003: Base; 8 Cyl 5.4L; "GAS, FI, Naturally Aspirated, VIN L"

Fits 1 more submodels. (Show all) Show less info

HAYDEN IDLER/TENSIONER PULLEY, STEEL -- 1 in. belt W, 3.25 in. pulley diameter, 3.562 in. OD, 0.67 in. ID, serpentine belt type, flat groove, back idler pulley type; Manufactured using the highest quality standards; Meets or exceeds OE specifications; Assists in belt routing and tensioning within the accessory drive system.

Fits the following 2003-2003 Ford E-350 submodels:

• 2003-2003: Base; 8 Cyl 5.4L;
• 2003-2003: Base; 8 Cyl 7.3L;

Four SeasonsFour Seasons manufactures and distributes a comprehensive line of replacement mobile climate control products and is one of the largest mobile compressor remanufacturers in the world.

Fits the following 2003-2003 Ford E-350 submodels:

• 2003-2003: Base; 10 Cyl 6.8L;
• 2003-2003: Base; 8 Cyl 5.4L;