BMW Spark Plug Wires

SPARK PLUG WIRE -- A high quality, OE replacement spark plug wire; Backed by 1-year, unlimited-mileage warranty.

Fits the following 1991-1993 BMW 318is submodels:

• 1991-1993: All Submodels; All Engines;

Bosch Ignition Wire Set

Bosch ignition leads incorporate the latest inductive core technology. The specialised construction of stainless steel wire winding wrapped around a Kevlar® reinforced aramid core, filters the RF interference by restricting the AC component. This allows DC energy to flow easily through the resistance of the spiral winding which has a lower resistance than normal resistive leads.

The overall construction of the cable core, spark plug boots and outer jacket make Bosch ignition leads suitable for use with gasoline, LPG or alternative fuel engines.

• Latest cable technology using inductive core for better performance
• 100% silicone construction inner and outer insulating sheathing
• Class F cables with superior heat resistance up to 250°C
• Ensures high performance whilst maintaining peak voltage to the spark plugs
• Exceeds International Standard ISO3808:2002(E) for High Voltage Ignition Cables
• Excellent RFI suppression and electrical conductivity properties
• High liner & tensile strength fiber glass reinforcing braid for longer life
• Resistance to aggressive under bonnet conditions of fuels and oils

Warranty Information: 5 year - 50,000 mile limited warranty against defects in material and workmanship.

---

Fits the following 1991-1993 BMW 318is submodels:

• 1991-1993: All Submodels; All Engines;

PRESTOLITE PROCONNECT SPARK PLUG WIRES, SET OF 4

Prestolite ProConnect Spark Plug Wire offers superior fiberglass, silicone, and Kevlar construction for excellent conductivity. High temperature performance, EMI/RFI noise suppression, and durability. Wiring systems are specially designed to meet customer-established performance, reliability, and cost specifications.

Features:

• OE conductor and OE/OES specified insulators, nipples, and terminals
• Superior fiberglass, silicone, and Kevlar construction for excellent conductivity, high temperature performance, EMI/RFI noise suppression, and durability
• Estimated to withstand temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit
• Click-in-place end caps design that match to OE end caps for quick installation and a tight fit without adjustment that gives a perfect fit
• Ignition cable and wiring systems specially designed to meet customer-established performance, reliability, and cost specifications
• Electronic protection systems from electrical or magnetic interference
• Resistant to heat, cold, and chemical attack

Allows for all weather starting. Meets SAE j2031 class E specifications. Won't crack or shrink and carries a maximum voltage.

Fits the following 1975-1976 BMW 2002 submodels:

• 1975-1976: Base; 4 Cyl 2.0L;

DENSO FIRST TIME FIT IGNITION WIRES, SET OF 6

Denso First Time Fit Ignition Wires are identical in form, fit, color, and performance to the factory-installed wire sets, and constructed to meet OE standards. Ferrite impregnated layers, silicone insulation for superior dielectric and heat performance, and high temperature Class E silicon jacket to withstand chemicals, moisture, and temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit.

Specifications:

• 7 mm diameter

Features:

• Pre-cut wire to exact length with reinforcing member for added strength and terminal retention
• Passed tests covering everything from electrical properties to shrinkage to chemical resistance and accelerated life testing
• Identical OE end caps, carbon impregnated fiberglass core for superior conductivity, fiberglass braid for maximum strength, conductive silicone layer for high temperature performance, and EMI/RFI noise suppression

Easy installation.

Fits the following 1989-1990 BMW 525i submodels:

• 1989-1990: Base; 6 Cyl 2.5L;

AC DELCO IGNITION WIRES, SET OF 4

AC Delco Ignition Wires meet or exceed original equipment quality specifications. Made from top-quality materials, precisely engineered and manufactured to provide everyday reliability and efficient performance.

Features:

• Constructed from top quality materials to help the engine run clean and longer
• Copper-core center electrode
• Engineered to high standards and tested under extreme conditions to exceed OE specifications
• Delivers high quality and dependable performance

Fits the following 1980-1983 BMW 320i submodels:

• 1980-1983: Base; 4 Cyl 1.8L; "GAS, FI, M10, Naturally Aspirated"

STANDARD SPARK PLUG WIRES, BLACK, SET OF 12

Standard Spark Plug Wires are engineered with silicone outer jacket to match the original that provides superior protection against severe under-hood operating environment. Silicone rubber provides unsurpassed heat resistance and eliminates burn-out for a tougher output.

Specifications:

• Assembled
• RFI suppression
• Stock distributor terminal ends
• Silicone jacket material
• Stock spark plug boot ends
• Spiral core conductor style
• Includes coil wire

Features:

• Aramid fibers provide maximum tensile strength preventing breaks and hot spots
• Fiberglass braid add to the wire's strength while increasing overall flexibility
• EPDM rubber insulation is the finest insulating material available to protect against voltage leaks
• Graphite impregnated latex, a conductive material with calibrated resistance to prevent radio frequency interference

Fits the following 1979-1980 American Motors Spirit submodels:

• 1980-1980: DL; 6 Cyl 4.2L; "GAS, CARB, Naturally Aspirated, VIN C"
• 1980-1980: Limited; 6 Cyl 4.2L; "GAS, CARB, Naturally Aspirated, VIN C"

• 1979-1980: Base; 6 Cyl 4.2L; "GAS, CARB, Naturally Aspirated, VIN C"

• 1979-1979: Base; 6 Cyl 3.8L; "GAS, CARB, Naturally Aspirated, VIN E"

• 1979-1979: Base; 6 Cyl 4.2L; "GAS, CARB, Naturally Aspirated, VIN A"

Fits 3 more submodels. (Show all) Show less info

BECK ARNLEY PREMIUM SPARK PLUG WIRES, BLACK, SET OF 6

Beck Arnley Spark Plug Wires are made of stainless steel terminals that are positively crimped with external pull strength for reliable connections. Designed with OE style boot seal to protect connection against heat, dirt, and moisture.

Specifications:

• 7 mm diameter
• Tinned copper conductor type
• Silicone jacket material

Features:

• 100 percent pure silicone jacket
• Fiberglass braiding provides an extra strength and flexibility for higher class rating
• EPDM inner insulation prevents arcing and voltage leak

All set comes with wire separators and electric grease packets where applicable.

Fits the following 1979-1981 BMW 528i submodels:

• 1979-1981: Base; 6 Cyl 2.8L;

Bremi Ignition Wire Set

The Bremi ignition wire set utilizes OE connectors and a copper core silicone wire that is waterproof, resistant to corrosion, high temperatures and vibration.

• OE-Equivalent.
• OEM style connectors for easy Installation.
• Resistant to high temperatures, corrosion and vibration.
• Ignition noise suppressed.

Warranty Information: 12 Month - 12,000 mile limited warranty against defects in material and workmanship.

---

Fits the following 1996-1998 BMW Z3 submodels:

• 1997-1998: Roadster; 4 Cyl 1.9L;
• 1996-1996: All Submodels; All Engines;

Prenco Ignition Wire Set

The Prenco ignition wire set utilizes OE connectors and a copper core silicone wire that is waterproof, resistant to corrosion, high temperatures and vibration.

• OE-Equivalent.
• OEM style connectors for easy Installation.
• Resistant to high temperatures, corrosion and vibration.
• Ignition noise suppressed.

Warranty Information: 12 Month - 12,000 mile limited warranty against defects in material and workmanship.

---

Fits the following 1988-1994 BMW 750iL submodels:

• 1988-1994: All Submodels; All Engines;

Beru Ignition Wire Set

The Beru Ignition Wires comply exactly with OEM requirements and thus guarantee precise fitting, optimal engine performance and economical fuel consumption.

Technical Features

• OE-Equivalent and Direct fit for easy Installation.
• Copper core construction
• Resistant to high voltages up to 40,000 Volts.
• Absolutely waterproof.
• Resistant to high temperatures, corrosion and vibration
• Reliable connection system.
• Ignition noise suppressed. (VDE standard).

BERU ignition leads sets consisting of assembled cables and connectors make the replacement very easy.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Fits the following 1988-1991 BMW M3 submodels:

• 1988-1991: All Submodels; All Engines;

KARLYN SPARK PLUG WIRES, BLACK, SET OF 6

Karlyn Spark Plug Wire Set comes with two layers of high grade silicone for superior voltage protection. Karlyn has engineered this wire set line that is second to none in every aspect of performance and coverage.

Specifications:

• Includes ignition coil wire

Features:

• Greatly exceeds OE and competitor specifications
• Super conductivity with superior corrosion resistance
• Contains 19 strands of tinned copper core
• Double extruded silicone over silicone wire

Fits the following 1986-1987 BMW 325es submodels:

• 1986-1987: All Submodels; All Engines;

PVL Ignition Wire Set

The PVL ignition wire set utilizes OE connectors and a copper core silicone wire that is waterproof, resistant to corrosion, high temperatures and vibration.

• OE-Equivalent.
• OEM style connectors for easy Installation.
• Resistant to high temperatures, corrosion and vibration.
• Ignition noise suppressed.

Warranty Information: 12 Month - 12,000 mile limited warranty against defects in material and workmanship.

---

Fits the following 1984-1985 BMW 318i submodels:

• 1984-1985: All Submodels; All Engines;