Dodge Intrepid Spark Plug Wires

Bosch Ignition Wire Set

Bosch ignition leads incorporate the latest inductive core technology. The specialised construction of stainless steel wire winding wrapped around a Kevlar® reinforced aramid core, filters the RF interference by restricting the AC component. This allows DC energy to flow easily through the resistance of the spiral winding which has a lower resistance than normal resistive leads.

The overall construction of the cable core, spark plug boots and outer jacket make Bosch ignition leads suitable for use with gasoline, LPG or alternative fuel engines.

• Latest cable technology using inductive core for better performance
• 100% silicone construction inner and outer insulating sheathing
• Class F cables with superior heat resistance up to 250°C
• Ensures high performance whilst maintaining peak voltage to the spark plugs
• Exceeds International Standard ISO3808:2002(E) for High Voltage Ignition Cables
• Excellent RFI suppression and electrical conductivity properties
• High liner & tensile strength fiber glass reinforcing braid for longer life
• Resistance to aggressive under bonnet conditions of fuels and oils

Warranty Information: 5 year - 50,000 mile limited warranty against defects in material and workmanship.

---

Fits the following 1996-1997 Chrysler Concorde submodels:

• 1997-1997: All Submodels; All Engines;
• 1996-1996: LX; 6 Cyl 3.5L;

• 1996-1996: LXi; 6 Cyl 3.5L;

Fits 1 more submodels. (Show all) Show less info

PRESTOLITE PROCONNECT SPARK PLUG WIRES, SET OF 6

Prestolite ProConnect Spark Plug Wire offers superior fiberglass, silicone, and Kevlar construction for excellent conductivity. High temperature performance, EMI/RFI noise suppression, and durability. Wiring systems are specially designed to meet customer-established performance, reliability, and cost specifications.

Features:

• OE conductor and OE/OES specified insulators, nipples, and terminals
• Superior fiberglass, silicone, and Kevlar construction for excellent conductivity, high temperature performance, EMI/RFI noise suppression, and durability
• Estimated to withstand temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit
• Click-in-place end caps design that match to OE end caps for quick installation and a tight fit without adjustment that gives a perfect fit
• Ignition cable and wiring systems specially designed to meet customer-established performance, reliability, and cost specifications
• Electronic protection systems from electrical or magnetic interference
• Resistant to heat, cold, and chemical attack

Allows for all weather starting. Meets SAE j2031 class E specifications. Won't crack or shrink and carries a maximum voltage.

Fits the following 1997-2000 Plymouth Prowler submodels:

• 1997-2000: Base; 6 Cyl 3.5L;

DENSO FIRST TIME FIT IGNITION WIRES, SET OF 6

Denso First Time Fit Ignition Wires are identical in form, fit, color, and performance to the factory-installed wire sets, and constructed to meet OE standards. Ferrite impregnated layers, silicone insulation for superior dielectric and heat performance, and high temperature Class E silicon jacket to withstand chemicals, moisture, and temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit.

Specifications:

• 7 mm diameter

Features:

• Pre-cut wire to exact length with reinforcing member for added strength and terminal retention
• Passed tests covering everything from electrical properties to shrinkage to chemical resistance and accelerated life testing
• Identical OE end caps, carbon impregnated fiberglass core for superior conductivity, fiberglass braid for maximum strength, conductive silicone layer for high temperature performance, and EMI/RFI noise suppression

Easy installation.

Fits the following 1997-1997 Plymouth Prowler submodels:

• 1997-1997: Base; 6 Cyl 3.5L;

TAYLOR CABLE THUNDERVOLT CUSTOM RACE-FIT IGNITION WIRES, BLUE, SET OF 6

Taylor Cable ThunderVolt Custom Wire Sets are the ultimate performance wire. Designed to fit muscle cars, performance cars, sports compacts, and trucks.

Specifications:

• 8.2 mm diameter
• Assembled
• Male/HEI distributor terminal end
• Stock spark plug boot ends
• Black distributor boot color
• Gray spark plug boot color
• Silicone distributor and spark plug boot material

Features:

• 50 ohms ferrite spiral-wound coated core which is a blend of exclusive copper and nickel alloy bonded by a conductive acrylic cover
• 100 percent Zimplex silicone 2-layer outer jacket for added heat protection up to 600 degrees Fahrenheit for extended wire life and performance
• Dyno tested to outperform the competition in spark energy, horsepower increases, and significant torque gains
• Offers smoother idle, improved fuel economy and low resistance for optimum RFI and EMI suppression
• Gray 600 degrees silicone plug boots featuring vibration proof double spring locking terminals

Compatible with most ignition systems and electronic components. Works with factory wire looms. Does not include coil wire.

Fits the following 2000-2000 Plymouth Prowler submodels:

• 2000-2000: All Submodels; All Engines;

AC DELCO SPARK PLUG WIRES, SET OF 6

AC Delco Spark Plug Wires meet or exceed original equipment quality specifications. Made from top-quality materials, precisely engineered and manufactured to provide everyday reliability and efficient performance.

Features:

• Constructed from top quality materials to help the engine run clean and longer
• Copper-core center electrode
• Engineered to high standards and tested under extreme conditions to exceed OE specifications
• Delivers high quality and dependable performance

Fits the following 1997-2000 Plymouth Prowler submodels:

• 2000-2000: Base; 6 Cyl 3.5L; "GAS, FI, Naturally Aspirated, VIN G"
• 1999-1999: Base; 6 Cyl 3.5L; "GAS, FI, Naturally Aspirated"

• 1997-1997: Base; 6 Cyl 3.5L; "GAS, FI, Naturally Aspirated, VIN F"

Fits 1 more submodels. (Show all) Show less info

MSD SUPER CONDUCTOR SPARK PLUG WIRES, RED, SET OF 6

MSD Super Conductor Spark Plug Wires ultimate performance provides extreme low resistance combined with the ability to suppress high EMI. Made of DuPont Kevlar conductor for increased tensile strength and durable outer sleeve for resistance to high heat or abrasion.

Specifications:

• 8.5 mm diameter
• Two-in-one
• Non-assembled
• RFI suppression
• Male/HEI and female/socket distributor terminal ends
• Eight multi-angle spark plug boot ends
• Gray distributor boot and spark plug boot
• Silicone distributor boot and spark plug boot material
• Spiral core conductor style

Features:

• Ferro-magnetic impregnated core that creates an effective EMI choke
• DuPont Kevlar material conductor for increased tensile strength and durable outer sleeve for resistance to high heat or abrasion
• Tough and high heat sleeve design that provides excellent abrasion protection
• Dual crimp terminals provide the strongest connections to the wire and lock to the spark plug terminal

Terminals for engines with early type socket and late type HEI spark plug top distributor caps.

Fits the following 2006-2007 Buick Lucerne submodels:

• 2006-2007: CX; 6 Cyl 3.8L;
• 2006-2007: CXL; 6 Cyl 3.8L;

STANDARD SPARK PLUG WIRES, BLACK, SET OF 6

Standard Spark Plug Wires are engineered with silicone outer jacket to match the original that provides superior protection against severe under-hood operating environment. Silicone rubber provides unsurpassed heat resistance and eliminates burn-out for a tougher output.

Specifications:

• Assembled
• RFI suppression
• Stock distributor terminal ends
• Silicone jacket material
• Stock spark plug boot ends
• Spiral core conductor style

Features:

• Aramid fibers provide maximum tensile strength preventing breaks and hot spots
• Fiberglass braid add to the wire's strength while increasing overall flexibility
• EPDM rubber insulation is the finest insulating material available to protect against voltage leaks
• Graphite impregnated latex, a conductive material with calibrated resistance to prevent radio frequency interference

Does not include coil wire.

Fits the following 1997-1997 Plymouth Prowler submodels:

• 1997-1997: Base; 6 Cyl 3.5L;

BECK ARNLEY PREMIUM SPARK PLUG WIRES, BLACK, SET OF 6

Beck Arnley Spark Plug Wires are made of stainless steel terminals that are positively crimped with external pull strength for reliable connections. Designed with OE style boot seal to protect connection against heat, dirt, and moisture.

Specifications:

• 7 mm diameter
• Mag core 500 ohms/feet conductor type
• Silicone jacket material

Features:

• 100 percent pure silicone jacket
• Fiberglass braiding provides an extra strength and flexibility for higher class rating
• EPDM inner insulation prevents arcing and voltage leak

All set comes with wire separators and electric grease packets where applicable.

Fits the following 1993-1996 Chrysler Concorde submodels:

• 1996-1996: LX; 6 Cyl 3.3L;
• 1993-1995: Base; 6 Cyl 3.3L;