Nissan B210 Spark Plug Wires

BOSCH SPARK PLUG WIRES, SET OF 4

Bosch Spark Plug Wire delivers maximum voltage to the spark plug for a hotter, more powerful, and longer spark resulting in optimum engine performance while reducing the chance of misfire and eliminating radio static.

Features:

• Stainless steel mag winding, 100 percent pure silicone jacket, Kevlar reinforced core, EPDM inner insulation, snug-fitting OEM-style silicone boots, and snap lock or OEM style connectors
• Total resistance to oil penetration for lifetime protection against wire set failure
• Discontinues power-robbing voltage leaks
• Guarantees proper fit, function, and appearance while providing extreme durability for long life

Wires are tightly crimped to the connectors to exceed OEM standards providing worry free installation and re-installation.

Fits the following 1979-1982 Nissan 210 submodels:

• 1982-1982: MPG; 4 Cyl 1.4L;
• 1979-1982: Base; 4 Cyl 1.4L;

• 1980-1980: Deluxe; 4 Cyl 1.4L;

Fits 1 more submodels. (Show all) Show less info

PRESTOLITE PROCONNECT SPARK PLUG WIRES, SET OF 4

Prestolite ProConnect Spark Plug Wire offers superior fiberglass, silicone, and Kevlar construction for excellent conductivity. High temperature performance, EMI/RFI noise suppression, and durability. Wiring systems are specially designed to meet customer-established performance, reliability, and cost specifications.

Features:

• OE conductor and OE/OES specified insulators, nipples, and terminals
• Superior fiberglass, silicone, and Kevlar construction for excellent conductivity, high temperature performance, EMI/RFI noise suppression, and durability
• Estimated to withstand temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit
• Click-in-place end caps design that match to OE end caps for quick installation and a tight fit without adjustment that gives a perfect fit
• Ignition cable and wiring systems specially designed to meet customer-established performance, reliability, and cost specifications
• Electronic protection systems from electrical or magnetic interference
• Resistant to heat, cold, and chemical attack

Allows for all weather starting. Meets SAE j2031 class E specifications. Won't crack or shrink and carries a maximum voltage.

Fits the following 1979-1982 Nissan 210 submodels:

• 1982-1982: MPG; 4 Cyl 1.4L;
• 1980-1982: Deluxe; 4 Cyl 1.5L;

• 1979-1982: Base; 4 Cyl 1.2L;

• 1979-1982: Base; 4 Cyl 1.4L;

• 1980-1980: Deluxe; 4 Cyl 1.4L;

Fits 3 more submodels. (Show all) Show less info

DENSO FIRST TIME FIT IGNITION WIRES, SET OF 4

Denso First Time Fit Ignition Wires are identical in form, fit, color, and performance to the factory-installed wire sets, and constructed to meet OE standards. Ferrite impregnated layers, silicone insulation for superior dielectric and heat performance, and high temperature Class E silicon jacket to withstand chemicals, moisture, and temperatures from -40 degrees Fahrenheit to 428 degrees Fahrenheit.

Specifications:

• 7 mm diameter

Features:

• Pre-cut wire to exact length with reinforcing member for added strength and terminal retention
• Passed tests covering everything from electrical properties to shrinkage to chemical resistance and accelerated life testing
• Identical OE end caps, carbon impregnated fiberglass core for superior conductivity, fiberglass braid for maximum strength, conductive silicone layer for high temperature performance, and EMI/RFI noise suppression

Easy installation.

Fits the following 1979-1982 Nissan 210 submodels:

• 1982-1982: MPG; 4 Cyl 1.4L;
• 1981-1982: Base; 4 Cyl 1.4L;

• 1980-1982: Deluxe; 4 Cyl 1.5L;

• 1979-1982: Base; 4 Cyl 1.2L;

• 1980-1980: Deluxe; 4 Cyl 1.4L;

• 1979-1979: Base; 4 Cyl 1.4L; "VIN H"

Fits 4 more submodels. (Show all) Show less info

STANDARD SPARK PLUG WIRES, BLACK, SET OF 4

Standard Spark Plug Wires are engineered with silicone outer jacket to match the original that provides superior protection against severe under-hood operating environment. Silicone rubber provides unsurpassed heat resistance and eliminates burn-out for a tougher output.

Specifications:

• Assembled
• RFI suppression
• Stock distributor terminal ends
• Silicone jacket material
• Stock spark plug boot ends
• Spiral core conductor style
• Includes coil wire

Features:

• Aramid fibers provide maximum tensile strength preventing breaks and hot spots
• Fiberglass braid add to the wire's strength while increasing overall flexibility
• EPDM rubber insulation is the finest insulating material available to protect against voltage leaks
• Graphite impregnated latex, a conductive material with calibrated resistance to prevent radio frequency interference

Fits the following 1968-1980 Triumph Spitfire submodels:

• 1980-1980: Base; All Engines;
• 1973-1979: Base; 4 Cyl 1.5L;

• 1968-1972: Base; 4 Cyl 1.3L;

Fits 1 more submodels. (Show all) Show less info

GRANATELLI MPG PLUS SPARK PLUG WIRES, SET OF 4

Granatelli MPG Plus Spark Plug Wire increases power to the spark plug up to 400 percent over stock for more power and better gas mileage. Provides faster engine startup, smoother running engine, and boosts horsepower and torque.

Specifications:

• 8 mm diameter
• 0 ohm resistance

Features:

• Solid stainless connector cable with stainless snap lock spark plug connectors
• Fiberglass-reinforced braid resists temperatures up to 500 degrees
• Unique EMI/RMI protection ring that prevents stereo noise and no RFI/EMI interference
• Patented design works with any fuel injection
• Provides necessary pieces for a complete installation

Ideal for use with aftermarket headers and turbocharger systems.

Fits the following 1979-1979 Nissan 310 submodels:

• 1979-1979: All Submodels; All Engines;

BECK ARNLEY SPARK PLUG WIRE -- A High Quality Replacement Part With OE Form, Fit, And Function

Fits the following 1979-1982 Nissan 210 submodels:

• 1982-1982: MPG; 4 Cyl 1.4L; "A14"
• 1980-1982: Base; 4 Cyl 1.2L; "A12"

• 1980-1982: Deluxe; 4 Cyl 1.5L; "A15"

• 1979-1982: Base; 4 Cyl 1.4L; "A14"

• 1980-1980: Deluxe; 4 Cyl 1.4L; "A14"

• 1979-1979: Base; 4 Cyl 1.5L; "A15"

Fits 4 more submodels. (Show all) Show less info

NGK Ignition Wire Set

NGK Resistor Spark Plug Wire Sets utilize a construction method known as "variable pitch" wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by "scrambling" and breaking up the electrical waves radiated by the firing of the spark plugs.

NGK Spark Plug Wire Sets are built to meet stringent OEM tolerances for a variety of import vehicles

• OE-Equivalent.
• OEM style connectors for easy Installation.
• Superior Firing and Fuel Savings
• Outstanding Durability and Performance
• Excellent Noise Suppression
• Numbered for easy cylinder identification.
• High quality EPDM and Silicone coverings.

CONSTRUCTION

A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter vs. 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

Warranty Information: 12 Month - 12,000 mile limited warranty against defects in material and workmanship.

---

NE66 NGK

Fits the following 1979-1982 Nissan 210 submodels:

• 1981-1982: All Submodels; All Engines;
• 1980-1980: Base; 4 Cyl 1.2L;

• 1980-1980: Deluxe; 4 Cyl 1.4L;

• 1980-1980: Deluxe; 4 Cyl 1.5L;

• 1979-1979: Base; 4 Cyl 1.4L;

Fits 3 more submodels. (Show all) Show less info