Ford Custom Starter

BOSCH PROFESSIONAL PREFERRED STARTER, REMANUFACTURED -- 100 percent factory tested prior to and during remanufacturing to meet or exceed OE specifications; Designed with 100 percent replacement of all bearings and bushings with high quality new friction reducing components; Its solenoid include 100 percent new high temperature cap, contacts, copper windings and terminal hardware; Ensures cranking and starting performance under all temperature extremes, provides balanced high speed torque for maximum performance and dependability, increases brush life and maximizes starting power, and offers less battery draw resulting in faster starts with maximum voltage; Features 100 percent exhaustive multipoint quality and performance testing, and armature/commutator remachined to the toughest concentricity industry standards; Built to withstand extreme heat, cold, and high demands; Covered with Bosch's Ultimate Protection Plan and free emergency roadside assistance program available 24/7 within two years from date of purchase.

Fits the following 1969-1972 Ford Custom submodels:

• 1969-1972: Base; 8 Cyl 7.0L;

USA INDUSTRIES STARTER MOTOR, REMANUFACTURED -- 12 V, 9 teeth; DD design; Clockwise rotation; Features all new hardware and insulators, new solid copper commutators, and zinc plated backing plates; Core charge applies; With USA Industries limited warranty.

Fits the following 1965-1971 Ford Custom submodels:

• 1965-1971: Base; 8 Cyl 6.4L;
• 1966-1970: Base; 8 Cyl 7.0L;

• 1965-1966: Base; 8 Cyl 5.8L;

Fits 1 more submodels. (Show all) Show less info

POWERMASTER OE/RETRO STARTER, NEW -- 22 lbs., 4.49 x 7.48 x 0.63 x 0.98 x 4.09 in. dimensions, 90 ft.-lbs. of torque at peak horsepower, 1.4 kW; A high quality, direct fit starter; With 1-year Powermaster limited warranty.

Fits the following 1964-1971 Ford Custom submodels:

• 1964-1971: Base; 8 Cyl 6.4L;
• 1966-1970: Base; 8 Cyl 7.0L;

MG INDUSTRIES PERFORMANCE GEAR REDUCTION STARTERS, NEW -- Features 100 percent more torque 4.4:1 gear reduction, roller bearing supports and integrated solenoid ensures starter can crank any engine, 200 percent more cranking power, 20,000 starts vs. 5,000 for stock, uses less amperage, turns faster under load, slower under no load and is more cold-weather resistant, enhanced rock/hill climbing ability with clutch-free starting, 0.33 smaller size and weight for easy installation, heavy-duty construction and extreme reliability that are the primary hallmarks of this performance gear reduction starter, and five sealed ball bearings that increase efficiency, reduce wear and thrive under extreme conditions like water intrusion; Integral solenoid is corrosion proof and heat-sinked to prevent overheating and thermal breakdown; Stainless steel main shaft provides direct line engagement which increases even further efficiency, power and reliability; Rotating billeted aluminum nose cone adapter can be turned in 20 degree increments depending on application to clear headers, oil pans or other obstacles; Depending on application there are dual-bolt patterns so they fit both the 153-tooth and 168-tooth flywheels; PSI certified and approved; With 1-year MG Industries warranty.

Fits the following 1949-1972 Ford Custom submodels:

• 1971-1972: Base; 8 Cyl 6.6L; "VIN W"
• 1968-1972: Base; 8 Cyl 5.0L; "VIN W"

• 1966-1972: Base; 8 Cyl 7.0L; "VIN W"

• 1964-1972: Base; 8 Cyl 5.8L; "VIN W"

• 1964-1971: Base; 8 Cyl 6.4L; "VIN W"

• 1965-1967: Base; 8 Cyl 4.7L; "VIN W"

• 1964-1964: Base; 8 Cyl 4.3L; "VIN W"

• 1957-1957: Base; 8 Cyl 4.4L; "VIN W"

• 1957-1957: Base; 8 Cyl 4.8L; "VIN W"

• 1949-1952: Base; 8 Cyl 3.9L; "VIN W"

Fits 8 more submodels. (Show all) Show less info