Ford P-350 Starter

BOSCH PROFESSIONAL PREFERRED STARTER, REMANUFACTURED -- 100 percent factory tested prior to and during remanufacturing to meet or exceed OE specifications; Designed with 100 percent replacement of all bearings and bushings with high quality new friction reducing components; Its solenoid include 100 percent new high temperature cap, contacts, copper windings and terminal hardware; Ensures cranking and starting performance under all temperature extremes, provides balanced high speed torque for maximum performance and dependability, increases brush life and maximizes starting power, and offers less battery draw resulting in faster starts with maximum voltage; Features 100 percent exhaustive multipoint quality and performance testing, and armature/commutator remachined to the toughest concentricity industry standards; Built to withstand extreme heat, cold, and high demands; Covered with Bosch's Ultimate Protection Plan and free emergency roadside assistance program available 24/7 within two years from date of purchase; With lifetime Bosch limited warranty.

Fits the following 1976-1976 Ford P-350 submodels:

• 1976-1976: Base; 8 Cyl 5.0L;
• 1976-1976: Custom; 8 Cyl 5.0L;

MG INDUSTRIES PERFORMANCE GEAR REDUCTION STARTERS, NEW -- Features 100 percent more torque 4.4:1 gear reduction, roller bearing supports and integrated solenoid ensures starter can crank any engine, 200 percent more cranking power, 20,000 starts vs. 5,000 for stock, uses less amperage, turns faster under load, slower under no load and is more cold-weather resistant, enhanced rock/hill climbing ability with clutch-free starting, 0.33 smaller size and weight for easy installation, heavy-duty construction and extreme reliability that are the primary hallmarks of this performance gear reduction starter, and five sealed ball bearings that increase efficiency, reduce wear and thrive under extreme conditions like water intrusion; Integral solenoid is corrosion proof and heat-sinked to prevent overheating and thermal breakdown; Stainless steel main shaft provides direct line engagement which increases even further efficiency, power and reliability; Rotating billeted aluminum nose cone adapter can be turned in 20 degree increments depending on application to clear headers, oil pans or other obstacles; Depending on application there are dual-bolt patterns so they fit both the 153-tooth and 168-tooth flywheels; PSI certified and approved; With 1-year MG Industries warranty.

Fits the following 1972-1976 Ford P-350 submodels:

• 1976-1976: Base; 8 Cyl 6.6L; "VIN W"
• 1976-1976: Custom; 8 Cyl 5.0L; "VIN W"

• 1976-1976: Custom; 8 Cyl 6.6L; "VIN W"

• 1972-1976: Base; 8 Cyl 5.0L; "VIN W"

• 1973-1973: Base; 8 Cyl 5.9L; "VIN W"

• 1972-1973: Base; 8 Cyl 6.4L; "VIN W"

Fits 4 more submodels. (Show all) Show less info

BOSCH PROFESSIONAL PREFERRED STARTER, REMANUFACTURED -- 100 percent factory tested prior to and during remanufacturing to meet or exceed OE specifications; Designed with 100 percent replacement of all bearings and bushings with high quality new friction reducing components; Its solenoid include 100 percent new high temperature cap, contacts, copper windings and terminal hardware; Ensures cranking and starting performance under all temperature extremes, provides balanced high speed torque for maximum performance and dependability, increases brush life and maximizes starting power, and offers less battery draw resulting in faster starts with maximum voltage; Features 100 percent exhaustive multipoint quality and performance testing, and armature/commutator remachined to the toughest concentricity industry standards; Built to withstand extreme heat, cold, and high demands; Covered with Bosch's Ultimate Protection Plan and free emergency roadside assistance program available 24/7 within two years from date of purchase; With lifetime Bosch limited warranty.

Fits the following 1976-1976 Ford P-350 submodels:

• 1976-1976: Base; 8 Cyl 6.6L;
• 1976-1976: Custom; 8 Cyl 6.6L;

STANDARD T-SERIES STARTER RELAY/STARTER SOLENOID, UNIVERSAL -- 4 terminals, no connector, male terminal, screw terminal type; Does not include hardware; A high quality starter relay/starter solenoid; For use with farm, industrial and marine applications.

Fits the following 1962-1976 Ford P-350 submodels:

• 1962-1976: All Submodels; All Engines;

STARTER RELAY/STARTER SOLENOID -- 4 terminals, screw terminal type; Fender mounting location; With hardware kit; A high quality, direct fit OE replacement starter relay/starter solenoid; With 3-year or 36,000-mile Standard limited warranty.

Fits the following 1962-1976 Ford P-350 submodels:

• 1962-1976: All Submodels; All Engines;