Ford Custom Tie Rod End

MOOG TIE ROD END, OUTER, SOLD INDIVIDUALLY -- A High Quality Direct Fit OEM Replacement Tie Rod End, Designed To Consistently Produce Just The Right Amount Of Preload To Provide Proper Steering Effort, Housing Is Forged Then Heat-Treated For Strength And Durability, Sealed With A Premium Polychloroprene To Keep Out Dirt, Its Bearings Include Grease Grooves That Ensure Flow Of Lubrication Throughout The Part

Fits the following 1965-1968 Ford Custom submodels:

• 1968-1968: Base; 8 Cyl 3.9L;
• 1968-1968: Base; 8 Cyl 5.0L;

• 1965-1968: Base; 6 Cyl 3.9L;

• 1965-1968: Base; 8 Cyl 4.7L;

• 1965-1968: Base; 8 Cyl 6.4L;

• 1965-1968: Base; 8 Cyl 7.0L;

• 1965-1967: Base; 8 Cyl 5.8L;

• 1965-1965: Base; 8 Cyl 4.3L;

Fits 6 more submodels. (Show all) Show less info

AC DELCO TIE ROD END -- Features an advanced-technology and performance-tested low-friction polymer upper bearing material that helps eliminate endplay and helps provide smoother, easier steering, better return-to-center; With heat-treated ball ends that are precision-finished and zinc dichromate coated for increased corrosion protection and smooth operation throughout the travel; Case-hardened, full-ball type stud for tighter over-all fit; 2 required per vehicle.

Fits the following 1972-1972 Ford Custom submodels:

• 1972-1972: Base; 6 Cyl 3.9L; "GAS, CARB, Naturally Aspirated, VIN E"
• 1972-1972: Base; 6 Cyl 3.9L; "GAS, CARB, Naturally Aspirated, VIN V"

• 1972-1972: Base; 8 Cyl 5.8L; "GAS, CARB, Naturally Aspirated, VIN H"

• 1972-1972: Base; 8 Cyl 6.6L; "GAS, CARB, Naturally Aspirated, VIN S"

Fits 2 more submodels. (Show all) Show less info

MOOG TIE ROD END, SOLD INDIVIDUALLY -- A High Quality Direct Fit OEM Replacement Tie Rod End, Designed To Consistently Produce Just The Right Amount Of Preload To Provide Proper Steering Effort, Housing Is Forged Then Heat-Treated For Strength And Durability, Sealed With A Premium Polychloroprene To Keep Out Dirt, Its Bearings Include Grease Grooves That Ensure Flow Of Lubrication Throughout The Part

Fits the following 1950-1951 Ford Custom submodels:

• 1950-1951: Base; 6 Cyl 3.7L;
• 1950-1951: Base; 8 Cyl 3.9L;

MOOG TIE ROD END, SOLD INDIVIDUALLY -- A High Quality Direct Fit OEM Replacement Tie Rod End, Designed To Consistently Produce Just The Right Amount Of Preload To Provide Proper Steering Effort, Housing Is Forged Then Heat-Treated For Strength And Durability, Sealed With A Premium Polychloroprene To Keep Out Dirt, Its Bearings Include Grease Grooves That Ensure Flow Of Lubrication Throughout The Part

Fits the following 1964-1964 Ford Custom submodels:

• 1964-1964: Base; 6 Cyl 3.6L;
• 1964-1964: Base; 8 Cyl 4.3L;

• 1964-1964: Base; 8 Cyl 4.7L;

• 1964-1964: Base; 8 Cyl 5.8L;

• 1964-1964: Base; 8 Cyl 6.4L;

• 1964-1964: Base; 8 Cyl 7.0L;

Fits 4 more submodels. (Show all) Show less info

MOOG TIE ROD END, SOLD INDIVIDUALLY -- This is a high quality OE replacement tie rod end.

Fits the following 1965-1968 Ford Custom submodels:

• 1968-1968: Base; 8 Cyl 3.9L;
• 1968-1968: Base; 8 Cyl 5.0L;

• 1965-1968: Base; 6 Cyl 3.9L;

• 1965-1968: Base; 8 Cyl 4.7L;

• 1965-1968: Base; 8 Cyl 6.4L;

• 1965-1968: Base; 8 Cyl 7.0L;

• 1965-1967: Base; 8 Cyl 5.8L;

• 1965-1965: Base; 8 Cyl 4.3L;

Fits 6 more submodels. (Show all) Show less info