Dodge Custom Water Pump

GMB OE REPLACEMENT WATER PUMP, NEW, ALUMINUM, NATURAL FINISH -- Standard volume pump flow, mechanical type, standard pump rotation; Includes 1 paper gasket; Features a high flow design that provides long lasting and efficient cooling; Designed for OE fit and performance; Factory lubricated for long life; The precision ground shaft and hub accept OE fan clutches perfectly; Its OE quality forged housing is specially formed to ensure maximum coolant flow; Precision built and balanced with its pressed on impeller that increases water flow; The unique no-sealant required gasket makes installation fast, easy and leak-free; Its unitized seal protects bearings that provides long life and leak free performance; Features factory sealed precision ground one piece bearing; Engineered, designed, and built using the strictest design and manufacturing guidelines; With the finest quality assured through ISO 9002 programs; Easy installation; Fits models with factory air pump; With lifetime GMB limited warranty.

Fits the following 1959-1965 Dodge Custom submodels:

• 1962-1965: Base; 8 Cyl 5.2L; "GAS, Naturally Aspirated"
• 1959-1964: Base; 8 Cyl 5.9L; "GAS, Naturally Aspirated"

A1 CARDONE WATER PUMP, NEW -- Includes mounting gasket; Designed and manufactured with the best new unitized seals for long and trouble-free performance; Guarantees leak proof seal on all mounting surfaces; Manufactured to original casting specifications for proper fit and proper water flow for maximum cooling; CSE engineered for installer acceptance, easy installation, and maximum durability; With 3-year or 36,000 mile A1 Cardone limited warranty.

Fits the following 1962-1965 Dodge Custom submodels:

• 1964-1965: Base; 8 Cyl 4.5L;
• 1962-1965: Base; 8 Cyl 5.2L;

AIRTEX WATER PUMP ASSEMBLY -- A high quality, direct fit OE replacement water pump assembly.

Fits the following 1962-1965 Dodge Custom submodels:

• 1963-1965: Base; 8 Cyl 6.7L;
• 1963-1965: Base; 8 Cyl 7.0L;

• 1962-1965: Base; 8 Cyl 6.3L;

• 1962-1964: Base; 8 Cyl 5.9L;

Fits 2 more submodels. (Show all) Show less info

EDELBROCK VICTOR SERIES WATER PUMP, CAST ALUMINUM -- 0.63 in. pilot shaft, 3.07 in. from block surface to hub, standard rotation; Includes gaskets except pump housing; Provides maximum flow and equal cooling to both sides of block; Features maximum cooling for street and racing engines, internal passages are balanced for maximum flow, impeller is larger than others for max pressure, impeller vanes dramatically increase flow rates, and equal distribution to both sides of block; Only flows in one-direction for optimum efficiency.

Fits the following 1959-1965 Dodge Custom submodels:

• 1963-1965: Base; 8 Cyl 7.0L;
• 1962-1965: Base; 8 Cyl 6.3L;

• 1959-1964: Base; 8 Cyl 5.9L;

Fits 1 more submodels. (Show all) Show less info

MR GASKET ELECTRIC WATER PUMP DRIVE KIT, BLACK -- Complete with motor mounting bracket, extra long bolts, 10 spline pulleys, drive belt, wiring and switch; Designed to alleviate the power drag produced by conventional pulley drive units; Features a heavy-duty electric motor turning at approximately 1500 rpm to fulfill cooling needs without draining precious engine horsepower; This unit can be turned on and off manually during a run or before and afterwards even with engine off; With Mr. Gasket's limited 90-day warranty.

Fits the following 1955-1965 Dodge Custom submodels:

• 1964-1965: Base; 8 Cyl 4.5L;
• 1963-1965: Base; 8 Cyl 7.0L;

• 1962-1965: Base; 8 Cyl 5.2L;

• 1962-1965: Base; 8 Cyl 6.3L;

• 1958-1964: Base; 8 Cyl 5.9L;

• 1957-1959: Base; 8 Cyl 5.3L;

• 1958-1958: Base; 8 Cyl 5.7L;

• 1957-1957: Base; 8 Cyl 5.8L;

• 1955-1956: All Submodels; All Engines;

Fits 7 more submodels. (Show all) Show less info