$65.88List Price $77.74Save $11.86Availability: In Stock
Free Ground Shipping
Low Price Guarantee
A1 CARDONE WINDOW LIFT MOTOR, NEW, SOLD INDIVIDUALLY -- 100 percent computer-tested under actual on-car simulated conditions to ensure proper function every time; Assembled with the proper amount of (see more)
Brand: A1 Cardone
Anticipated Ship Out Time:
Same day - 1 business day
"Dittos on 1st review for metal tabs and recrymp with channel locks. Not pretty but they also loosen jar lids well. My 1998 Town and Country Chiltons stated to tape the window up half way and take off the window quick disconnects to see if anything was binding. My motor was not completely dead but had one place where it dragged but just in one direction. Ditto on the cable assembly being critical. If you are careful you will not have to rethread the cable as I did. Also in the process the cable jumped off one of the runner pulleys. When assembled this way window dragged (regulator bounces). So...uncoiled the cable thread it correctly then rewind. But after all that worked like a charm."posted by: twotonetool on September 1, 2012
"Although the part fit in my 2000 Chrysler T & C van, I had difficulties removing the original motor from the vehicle. Additionally, I needed to go to the hardware store to purchase new Stainless Steel hardware to re-install the new motor. This added to my installation time but resulted in the proper installation and operation of the motor. The electrical connection was correct for the vehicle, so no issues there. The instructions provided with the motor were generic and intended to cover a wide market of products, however if I had followed the directions as indicated, it would have meant drilling holes in the interior side of the sheet metal door and going through major pain. It was just easier to "go it alone".
One major point that was NEVER discussed in the instructions was the fact that extreme care needs to be taken when removing and re-installing the lift cable take-up bobbin. It is under spring tension and MUST be installed in the exact same orientation as it was removed from the vehicle or the entire installation will not work. If you CAREFULLY remove the bobbin and reinstall it the same way, you should be good to go. Also, the original motor assembly has 3 crimped metal tabs that attach to the regulator assembly.. The instructions never mentioned that these need to be "opened up" with either a screwdriver or pliers and then to be "re-crimped" somehow to the original regulator assembly. I used a large 3-4" jaw channel-locks pliers to do the job. Not very pretty, but it did work.
I also noticed that the original Chrysler motor used yellow cad plated hardware (excellent for corrosion resistance) and the replacement motor uses nickel plated hardware. This will most certainly rust sooner than later.
Overall, the motor did work as advertised and connected electrically to the vehicle first time out. No major complaints. Install time including a trip to LOWE'S for the stainless Steel screws, nuts, lockwashers and rubber washers was about 2-1/2 - 3 hours."posted by: Robie on December 5, 2010
$61.13List Price $159.00Save $97.87Availability: In Stock
Free Ground Shipping
Low Price Guarantee
VDO WINDOW MOTOR, NEW, SOLD INDIVIDUALLY -- With 7 tooth metal pinion gear and butt connectors; Made from a durable construction material for long service life; Features corrosion proof polymer pinion (see more)
Packed with the right amount of lubricant, the A1 Cardone window motor will operate smoothly and quietly and will surely last long in service. This window component went through 100% computer testing under real on-car simulated situations, so it will definitely work well any time and at any given situation. This motor also features magnets that are capable of providing the right amount of torque necessary in withstanding extreme weather, plus brushes that are made to OE specs to be sure that the armature properly matches the contacts. This A1 Cardone window motor for the Chrysler's front, passenger side window is sold individually, along with a generous lifetime manufacturer limited warranty.
VDO Window Motor
The VDO window motor is manufactured from durable and premium-quality materials for reliable performance and long lifespan. This window motor, which comes with a 7-tooth metal pinion gear and butt connectors, are designed to meet or even exceed OE specifications, so it will fit and function just like the original component. Since it is also direct fit, even DIYers won't have a hard time installing it and making it work. Part incompatibility will never be an issue, too. The said VDO window motor also includes a polymer pinion head that's corrosion proof, so no amount of corrosive element can cause premature damage on it. Sold individually, this window motor is ready to deliver the much-needed lifting efficiency to bring the vehicle's windows back to life.
Dorman Window Motor
Quality tested for efficient performance and durability, the Dorman window motor will surely satisfy even the most demanding Chrysler owners. Designed to replace the motor of the front, driver-side window, this Dorman product meets OE standards in fit, form, design, and function, so you won't have any problem fitting it in place and making it work with the rest of the window system components. This unit is 100% new and is packed with the necessary mounting hardware, so installation will never be too big of an issue even for DIYers. Its wiring harness is also direct fit--so there's no wire splicing required.
Free Shipping on orders over $50* | Lowest Prices Guaranteed*| Over 2,345,124 Customers Served Since 1995
What Our Customers Say
Award Winning Customer Service
Earn APW Reward Points
Our loyalty program just got better! More rewards, easier redemption, bigger savings.