Transfer Case Lowering Kit
We Have 22 Items for Transfer Case Lowering Kit In-Stock.
Want to prevent stress and driveline vibration from occurring to your ride? Thank your lucky stars because the transfer case lowering kit is here. What it does is lowers your ride's transfer case so that it is in a proper angle to help your car perform in its maximum performance. It also prevents the two conditions mentioned in the first sentence from happening. If you own a four-wheel drive, you'll find that this works like a charm. Using a transfer case lowering kit is an easy way to get your transfer case to the right position and angle. Since the kit already contains everything you will need, all you have to do is have the proper tools and hardware to install it. It also comes in different sizes, fit for vehicles raised in varying heights. Make sure you get one that is compatible with your ride. Otherwise, you might not be able to achieve the results that you want. Get the perfect fit for your ride by letting Auto Parts Warehouse select a transfer case lowering kit that's best for your ride. Just provide your ride's details and we'll take care of everything for you. Buy now!
Transfer Case Lowering Kit: The Driveline Vibrations Solution
Since you had your vehicle raised for some inches to give it a boost, now you are worrying about the driveline vibrations that you experience every time you're on the road. To correct your car's driveshaft alignment, we suggest that you try to lower your transfer case for about an inch or more. A transfer case lowering kit is a cheap and easy solution to get rid of unnecessary shakes that could cause damage to your car's other components.
Five tips to keep in mind
Though we cannot suggest the best brand of transfer case lowering kit to look for, here are some tips that you can use in finding the right one for your vehicle:
- Know your vehicle's specifications. Lowering kits are vehicle-specific; it is important to know the make, model, year of your car. You should also know how many inches your vehicle was raised. Most lowering kits specify a range (i.e., 2-4in, 4-8in) to give your transfer case the right lowering height to use.
- Determine the lowering height your car needs. You may want to ask an expert mechanic's opinion on how low your car should be to balance it with your driveshaft. This is also specified on the details of the kits sold--you should know this information first. Don't buy anything if you are not so sure about this detail.
- Inspect the kit details. A complete transfer case lowering kit should include the necessary brackets, mounting hardware, and an instruction guide. Otherwise, look for other kits that have these inclusions indicated and read reviews to look for the best brand suggestions of car enthusiasts. This kit features an easy bolt-on installation, so you can surely mount it by yourself.
- Choose the material type and color. Typically, the materials used in high quality lowering kits are aluminum spacers and powder-coated steel brackets. These are tested to be durable and corrosion resistant, so no need to worry about rust and premature wear. You can select, however, between red and black brackets, whichever looks best on your car.
- Consider the price. Buying a kit is usually cheaper than buying parts individually. A kit can be less than $50 up to $100, depending on the brand. We suggest that you look for the one with the best price and the longest warranty. This is to ensure that you can still replace the product if any problem occurs during installation or first months of use.
In a nutshell
Though there is a wide variety of transfer case lowering kit sold all over the Internet, your goal is to minimize your vehicle's driveline vibration, so it is best to look for the right kit that will correct your vehicle's alignment. Be equipped with all the information about your vehicle before buying car parts. After all, only the right kit will fit in your vehicle properly and perform its function-the right way.
Installing a Transfer Case Lowering Kit: Five Steps to a Shake-Free 4WD
Have you noticed unnecessary vibrations whenever you're driving your 4WD vehicle lately? This driveline vibration may be due to loose or worn parts, or poor car balance. A simple but sure remedy to eliminate these vibrations is installing a transfer case lowering kit. It will help lower your vehicle's transfer case and transmission, improving your driveline angles that will leave your car completely shake-free. This includes all the bolts and nuts you'll need, so installing the kit will be the least of your worries.
Difficulty level: Easy
Tools that you'll need:
- Floor jack
- Wrench set
- Screwdriver set
- Replacement transfer case lowering kit (includes linkage relocation bracket and mounting hardware)
Step 1: Park your car on a level surface. Place a floor jack under your vehicle's skid plate. It is a steel plate bolted in the underside of your car. Lift it until you have enough space to work on and ensure that there is a bit of pressure on the plate.
Step 2: Using a wrench, loosen the nuts in the skid plate. Begin from the center part and then loosen the bolts on the frame of the skid plate afterwards.
Step 3: You are now ready to install the new transfer case lowering kit. Lower the floor jack and skid plate at about 3 inches. Install the lowering kit per side and in between the skid plate and the frame.
Step 4: Use a flat washer when securing the bolts. Tighten all the bolts firmly using a wrench. Remove the floor jack.
Step 5: Test-drive and check for vibrations. Retighten bolts if necessary.
With its easy bolt-on feature, installing the transfer lowering kit is as simple as mounting hooks on your kitchen. In just five simple steps, you can now experience a smoother drive sans the vibrations on your 4WD vehicle.