Are your headlights starting to dim the same way your interior lights are? A slow engine crank—are you experiencing it, too? Have you ever had to ask your friend to help you jumpstart your car? Well, you might be looking at an inevitable culprit: a failing car battery.
How long do car batteries last? About three to four years. So when you’ve reached this point, it’s time to consider getting a new one. But it is still important to ensure your battery is due a replacement. Either you have a mechanic confirm it for you or you check for signs yourself: sulfate build-up, faulty battery charge, and inaccurate alternator voltage, to name a few.
There are a lot of options available in the market if you’re looking for a replacement battery to revive your car’s performance; however, no matter how high-quality the new battery you outfit your car with, it’s not going to deliver as expected if not perfectly set in place.
So, how to change battery the proper way? Here are the steps:
1. Access your battery. Locate the positive and negative terminals.
2. Using a wrench, loosen first the nut or bolt of the negative terminal, then remove, using a terminal puller, the cable and terminal from the negative battery post. Do the same with the positive terminal. Remember: negative first, then positive—this is how to disconnect car battery properly.
3. Disengage the battery hold-down clamp and take out the battery without jostling. Take advantage of the battery handle, if there’s any, and use both your hands to support the weight of the battery.
4. Look out for corrosion your old battery might’ve left behind on the tray or hold-down clamp. Thoroughly clean the spots using a battery cleaning solution or baking soda-water mix.
5. Clean your battery connectors, too, using a wire brush. The cleaner yours posts and clamps are, the better connection you’ll secure for your replacement battery.
6. Now, you’re all set to install your new battery. How to put a battery in a car? Simple. Just rest it on the hold-down tray and fix it in place with the hold-down clamp. Finish off by spraying both terminal ends with an anti-corrosion solution.
7. Attach and tighten the positive battery cable. After which, do the same thing with the negative cable. Remember, this time around, it’s positive first, then negative.
8. Finally, check if all connections are tight. Make sure your battery is securely in place; it shouldn’t wiggle back and forth. When everything feels solid, you can now enjoy renewed performance from your newly installed battery.
If you’re looking for top-notch car battery replacements you can afford, Auto Parts Warehouse has the best options for you. Check them here: https://bit.ly/2MIZY0A.