Imagine the hassle when your car battery dies and no other vehicle is present to help you jump-start it with; this is when a jump box for a car comes in handy. In this article, we’ll explain how to use a jump box and its advantages and disadvantages. But if you’d like to check out some jump boxes or jump starters now, you can visit Auto Parts Warehouse to see our selection right here: https://bit.ly/2PwSxLm
What is a Jump Box?
A jump start box or jump box is a portable car battery starter. A jump box is different from a battery charger as the former can’t charge a dead car battery, only a battery that’s low on power. It is a portable jump starter that provides the necessary power to start your vehicle that has a dead battery.
Advantages and Disadvantages of Using a Jump Box
Advantages – Aside from being handy and not requiring another vehicle to use (so there’s no chance you’ll accidentally damage the host car), a jump box has plenty of power and an internal battery that provides high-powered output, which enables dead car batteries to be instantly usable. A jump box also has a sealed battery that prevents spilling or leaking, as well as plastic housing, which makes it fully sealed. Some jump boxes also have features like air compressor, emergency lights, radios, 12-Volt outlets, and inverters.
Disadvantages – Although a jump box can power your car, it can’t handle too much load, especially if your car has a lot of electrical components like hybrid and electric cars. Also, even a small jump box occupies a bigger space compared to jumper cables and it usually needs to be charged a few times a year and can only last for 3 to 4 years even when properly maintained. Moreover, cold weather can decrease the performance of a jump box.
Starting a Car Using a Jump Box
Using a jump box is generally the same as using jumper cables but it’s still advisable to read your owner’s manual because some vehicles have specific jump starting instructions. Also check if the jump box’ output voltage matches your car’s battery charger voltage.
Attach the positive jump box cable to the positive terminal of your car’s battery and the negative jump box cable to a good ground somewhere on the engine. Since jump box cables are short, you have to place the jump box in a stable area within the engine compartment. Make sure it’s not placed near the radiator fan, engine pulley, or areas where it can knock electrical connections loose.
Next, turn on your jump box then try starting your car engine for no more than 5 seconds. Wait for a couple of minutes before trying again if your car won’t turn on. If you need to adjust the jump box cables, turn off your car and jump box first. You may need to get a new battery if you’ve already had 5 attempts and the car still won’t start. You can get quality replacement car batteries from Auto Parts Warehouse right here: https://bit.ly/2PyTFOx
As soon as your engine starts, turn off the jump box. Carefully detach the negative jump box cable and place it back in the jump box. Do the same with the positive jump box cable.
Idle your vehicle for a couple of minutes before driving and make sure to recharge your jump box as soon as possible for future use.