How to Install and Use a Chevrolet Power Programmer
Unlike other aftermarket upgrades, the power programmer is quite easy to install and use. The plug-and-play device lets you easily tune the performance of your Chevy by re-calibrating the onboard computer of the vehicle. It tunes the system for peak performance and to boost power,. The hand-held electronic device allows you to have greater control over your vehicle by letting you alter or adjust some of the settings. Power is right at your fingertips as you go through the options for finer-tuning. Although the Chevrolet power programmer may do a lot of complicated, technical work for you, the device is pretty straightforward. Here's a rundown of the installation:
Required skill level: Novice
Note: The job will take about 5 minutes or so. Power programmers are designed as plug-and-play devices.
Needed tools and materials
- Power programmer for the Chevrolet vehicle
Checking what's in the box
First off, you have to check what comes with the package. Aside from the tuner or programming device, make sure that in the box you'll also find a cord that attaches to the programmer, a USB cable, a software or CD, and some installation instructions, along with the warranty. Read the instructions carefully.
Getting the latest updates for the software
Before you plug in the electronic hand-held device, you must first log on to the website of the manufacturer. Check for updates and other options for programming the vehicle. The software must be updated. The updates and upgrades are usually free, so take advantage of them. Look for the latest releases and other relevant info.
Plugging in the device
To install, you just have to plug in the programmer. The device is plugged into the OBD II port under the dashboard. By plugging it into that port, the device gains access to the vehicle's computer and can alter the signals or modify the settings.
Following the tuner prompts
You have to turn the key to the on position before you can start working with the device. As you do this, the programmer will start checking and reading for diagnosis codes. You have the option to view or clear the codes. Just follow the instructions and prompts. After this, you may now head to the vehicle tuning mode. The device will communicate with the onboard vehicle computer and will let you choose from several options. There'll be several questions you have to answer by clicking on the right buttons. You may be asked to choose between power tuning and factory tuning, for instance. You may also adjust the engine rev limit to go higher than the factory or you may leave it at stock. You can also make changes on the speed rating. The device may ask if there are changes made on rear axle rotation, if your vehicle is equipped with an aftermarket shift kit, or what kind of transmission system it has. You can alter the gear ratios, stiffen up the shift points by RPMs, make adjustments on the transmission shift firmness, or adjust every single gear. After going through all the questions and options, the device will start programming what you've just edited or adjusted. After tuning is done, you may be instructed to turn the ignition off and then turn the key back to the on position. Once everything has been programmed successfully, disconnect the programmer.
Test-driving the vehicle
Drive the vehicle to see if it's running well and if the changes or modifications you've made through the power programmer are reflected through the vehicle's performance.
EdgE Products 25060 Evolution Power Programmer
The Edge Products 25060 Evolution Power Programmer is capable of re-tuning a Chevy truck to maximize its performance, fuel economy, and monitoring capabilities. It's the first standalone programmer with a display, and it comes with a custom-designed pod to give the Evolution a factory-installed look. This also functions as the truck's diagnostic tool to see and clear any trouble codes. The truck's output values, performance, and the engine's vital components can also be monitored through this power programmer. The Edge Products 25060 Evolution Power Programmer has four on-the-fly adjustable power levels, which can add up to 40-horsepower and 38 ft-lbs of torque. Substantial power gains on the truck can be felt, thanks to the power programmer's display technology. The power programmer's sleek design compliments the vehicle's dashboard as a state-of-the-art display. Each Edge Products 25060 Evolution Power Programmer is sold individually, and it comes with a 1-year Edge Products limited warranty.
Hypertech 32000 Power Programmer
The Hypertech 32000 Power Programmer maximizes every drop from the vehicle's fuel to gain more power at wide-open throttle, and more miles at part-throttle. Engineers at Hypertech designed the 32000 Power Programmer to optimize the engine's spark and fuel curve and to increase torque, horsepower, and engine efficiency. Truck and SUV drivers can now use less fuel to accelerate and maintain a cruising speed. Hypertech Powerstat is one of the Hypertech 32000's features that allow a driver to adjust the on/off temperatures of electric cooling fans to lower the thermostat. The Active Fuel Management is another feature that can disable the engine's multiple cylinders when driving at light loads. A selectable 0-60 Throttle Restriction feature can also tune the engine's control systems during low speed performance. The Hypertech 32000's Power Tuning offers a Low EGT for proper transmission shifting and for the best engine tuning. Sold individually, the Hypertech 32000 Power Programmer comes with a lifetime Hypertech limited warranty.
Jet Performance 15008 Performance Power Programmer
Designed to modify the engine's air and fuel ratios, the Jet Performance 15008 Performance Power Programmer can add up to 130-horsepower and 205 ft-lbs of torque to any light truck or SUV. The Jet Performance 15008 has an integrated Tri-Power Performance Tuning feature, which allows the driver to switch from regular, mid-grade, or premium fuel mode. This special tuning feature allows the Jet Performance 15008 to run the engine at peak efficiency, depending on the fuel's octane level. The vehicle's ignition timing, speed and rev limiter, shift points and firmness can be modified by the Jet Performance 15008 when needed. Also, this performance power programmer can also correct the vehicle's speedometer and ABS system trouble light. Every Jet Performance 15008 Performance Power Programmer can be easily plugged into a vehicle's diagnostic port. Its built-in scan tool makes real-time monitoring of the vehicle's sensors much easier. This power programmer is sold individually, and it comes with a lifetime Jet Chips limited warranty.