Every would–be racer dreams of driving a car with a powerful engine. With all the aftermarket parts available, you can turn your stock engine into a powerhouse. For this purpose, the valve train is a good option to start your modifications on. If you're going to put aggressive camshafts into your engine, you'll need to be able to adjust your valve train. Sturdy rocker arms and studs are needed to handle the bigger camshaft profiles. The Comp Cams Rocker Arm Adjuster should help you do just that. It has all the stuff you need to make your valve train adjustable. The problem with stock valve train parts is that they're designed for only one kind of camshaft profile. Bigger camshafts won't be able to run right if you do not replace your stock rocker arms and studs. That's because stock valve train parts are designed only for low valve lift and low spring pressures, which just won't cut it for more aggressive configurations. The Comp Cams Rocker Arm Adjuster helps your rocker arms perform well on any configuration. Additionally, each rocker arm is made to meet and even exceed OEM specifications. Each stud has a wider diameter to better distribute engine load. The adjusting nuts, meanwhile, have polylocks that give incredible hold. The high–strength material ensures a perfect lock onto your rocker arms even under high engine speeds. Without a doubt, it is the one of the most valuable upgrades you can add to your engine. Place your order now right here at Auto Parts Warehouse!