Replacing a Broken Dodge Step Bumper
The step bumper is used as a reinforcement to the rear bumper. But while it doesn't have the same structural support and impact-absorbing qualities of the bumper, this accessory makes it much easier to climb in and out of the rear of the vehicle. This is a practical add-on for work vehicles because of the convenience and added support that it offers. If your step bumper is already rusty and failing out after using it for years or it's badly damaged after a collision, the best thing for you to do is to replace it. You want have to go to an auto shop just to install a new one. We can help you out here. Replacing a broken step bumper usually takes just about 45 minutes. With the right Dodge step bumper, installation is fairly easy. Follow these steps for step bumper replacement:
Difficulty level: Moderate
Things you'll need:
- New step bumper
- Bumper brackets and receiver brackets
- Bolts and washers
- Penetrating lubricant
- Spray undercoat
- Tape measure
Step 1:Pick the right step bumper for your vehicle. Make sure that the new step bumper matches the rear of the vehicle, especially when it comes to length. It's not just the size or length you have to worry about. You also have to check for any spacing issues with the electrical fixture or trailer hitches. The new step bumper must be a great match for the vehicle.
Step 2:Remove the old step bumper. You first have to check the fasteners or mounting hardware at all sides. Use some penetrating lubricant to loosen them easily. To remove the bolts, you have to use a wrench. Free the step bumper and disconnect the wiring. Set aside all the factory fasteners and other hardware in a safe place. You have to set the plastic step tread and gray cladding before you attach the new step bumper to the vehicle. To protect against rust caused by dirt and moisture, spray some undercoat on the step bumper. This undercoat will improve its corrosion resistance or protection.
Step 3:Detach the bumper brackets from the vehicle's frame. After this, you have to disconnect the wiring guide from the bumper brackets. In some cases, you have to make some adjustments on the trailer hitch and spare tire carrier if the vehicle is equipped with these. You have to ensure proper placement. The brackets for the hitch receiver must be positioned well, between the frame and the bumper bracket. Attach the bumper brackets loosely with bolts and washers. The new step bumper should easily fit.
Step 4:Connect the bumper to the brackets and fasten it. Use a wrench to tighten the fasteners. Make sure that all parts are in place. Reconnect the wiring and other mechanisms. Once everything's properly attached, you now have to test the newly installed step bumper on your vehicle. See if this is attached well and if this can hold the weight as you step on it. Make the necessary adjustments as needed.
Fey Step Bumper
With its full-size built and sturdy steel composition, Fey step bumper will surely enhance the vehicle's rear protection and improve its badass look. Equipped with a 7 gauge hitch plate and a 12 gauge face channel, this step bumper is guaranteed to last for a long time. Its stamped and formed steel makeup is V5 tested to ensure the unit's durability. This universal style step bumper also features a polyurethane baked powder coating, which is proven to protect the unit's hitch from rust accumulation and deterioration. The added contoured hitch pad covers the entire hitch plate for extra defense. It also has a diamond plate tread design that ensures a zero-slip protection for the stepping surface of the bumper. The product has a certified 800 lbs. tongue weight and 8,000 lbs. trailer weight for the full size version and 350 lbs. tongue weight and 3,500 lbs. trailer weight for the mid-size version. Installation brackets and mounting bolts are not included in the package, but they can be bought separately. The Fey step bumper carries a three-year limited manufacturer warranty.
Replacement Step Bumper
Replacement step bumper spells utility and style. Its premium steel component is V5 tested to ensure that the material is long-lasting. The step bumper's chrome finish provides extra protection against scratches, and it also enhances the vehicle's look through the unit's shiny, silver appearance. Apart from the upgrade in looks and protection that it can give, the step bumper's chrome finish also makes it easy for the vehicle owner to wash and clean the unit. This product is not only easy to maintain but also very simple to set up. A regular vehicle owner can install the step bumper in 30 minutes or less. It features a step pad provision, but the actual unit is not included in the package. The additional step pad and step pad installation brackets can be bought separately. Replacement's heavy-duty rear step bumper is backed by a one year, unlimited-mileage warranty, and it is sold individually.
Auto Trust Gold Step Bumper
Auto Trust Gold step bumper is made from V5-tested high-grade steel, which is proven to endure the harshest of conditions and varying temperatures. Its sleek and stylish black finish does not only give the vehicle an instant upgrade on looks but also extra protection against oxidation and corrosion. The top-quality steel boosts the step bumper's tongue weight and trailer weight, while the black powder coating reinforces its resistance against outside contaminants. Because the package includes the needed mounting bolts and installation brackets, the Auto Trust Gold step bumper is very easy to install. The vehicle owner need not spend an hour for the unit's installation because of its direct-fit quality. The product also features hole provisions for the license plate and license lights. The package comes with a free step pad, but the step bumper is sold individually. The Auto Trust Gold step bumper carries a five-year limited warranty from the manufacturer.