An Easy Guide on How to Maintain Your Dodge Tailgate
If you frequently use your trusty Dodge pick-up truck, then you should always be aware whether your tail gate is still in good condition. Your tailgate is usually folded down whenever you load and unload cargo from your truck, as well as allow people to ride on. Like ordinary doors, the tailgate is usually opened and closed most of the time. Sometimes, it tends to be slammed carelessly without knowing that it may give in anytime. That's why it is important to check its condition regularly. Here are some useful tips that can help you keep your Dodge tailgate in good condition:
- Check the charging plug for rust.
Your Dodge tailgate has an electrical system that helps it to operate. Among its components, the most prone to premature wear is the charging plug. It is important that you check it once in a while. You can do this by simply using a voltmeter to check if the charging plug is still working. If it doesn't, remove the plug from the trailer and check the connection at the back for tightness or signs of corrosion. Even a 0.001 inch of corrosion is enough to stop a starter from amplifying, so it would be a good idea to remove both the positive and negative connections and clean them.
- Inspect the wirings for cuts.
The wirings of the tailgate system are prone to getting damaged or cut due to overuse. When this happens, you need to check them for signs of wear and tear. You can use a voltmeter to check if the wirings have the same readings as the charging plug. If the reading at the front plug is lower, then most probably, there might be a problem with the wire or connections. Replace them with new ones as soon as possible.
If you're already sensing something wrong with your Dodge tailgate, you may want to consider conducting a voltage drop test on the pump motor. You'll need to remove the valve solenoids and clean the hydraulic valves to see if there's any dirt or corrosion present there. Make sure the wires and the connections to the switch and hydraulic solenoids are not damaged. Repair or replace them as necessary.
- Ensure that the hydraulic hoses are secured.
Make sure that any of the tailgate's hoses does not show any signs of cracks or cuts. Replace any chaffed hoses if necessary, and secure them so they will not chaff again. Check the hoses for any leaks, and if they show any signs of dampness, then they need to be replaced. Keep the hydraulic tank free of dirt and debris, and check the hydraulic cylinders for any leaks or scoring.
Just like any other car part, it is important that you keep the tailgate clean at all times. The dirt and debris that it is exposed to is usually the cause of worse problems. Make it a point to clean it with mild soap and water and let it dry under the sun. Clean it and while you're at it, check the bushings and pivot pins for signs of wear or seizing.
Go Industries Tailgate
The louvered design of this Go Industries tailgate does not only enhance the vehicle's rear end styling; the narrow openings also improve airflow, resulting in less wind resistance and increased fuel economy. This V-gate design also makes the rear view more visible. Made of heavy-duty steel, this tailgate comes in a black powder-coated finish. It is built to withstand common road elements and survive extreme weather and other conditions. With its protective finish, the tailgate will not chip or fade easily. The sturdy steel will not bend or get corroded after just a few thousands of miles. This direct-fit automotive product is a cinch to install using the existing latches. Plugging it into a 5th wheel trailer is convenient as well. A mark of fine quality, the product is covered by a manufacturer warranty, up to 3 years for the material and workmanship and 1 year for the finish.
Husky Liners Tailgate
This Husky Liners tailgate is not only meant for a more customized, stylish look. Its louvered design also reduces wind resistance and improves fuel efficiency, with the slots in-between and narrow openings allowing for better airflow. Although the tailgate is made to be tough, it does not come with too much weight as it is constructed using lightweight anodized aluminum. This aircraft-grade material is guaranteed to pack the extra strength needed for long-term service and quality. With its protective, eco-friendly finish, the silver tailgate can resist rust and corrosion effectively. Its design also improves rearward visibility, making it easier and safer to tow a trailer. Installing this direct-fit product will not be too complicated as it is molded to fit with OEM hinge points and latch points--no drilling required. The latch is even included in the package. This product carries a 1-year limited manufacturer warranty.
This Replacement tailgate ensures rust protection. Made of heavy-gauge steel, this part had to undergo 500 to 1,000 hours of salt-spray testing just to ensure high resistance to rust and corrosion. To guarantee added strength and durability, it is coated with Electro Deposit Primer. With its construction quality, this tailgate can withstand different weather and road conditions. It will not succumb to damage quite easily even when exposed to heat, moisture, varying temperatures, road salt, and other harmful elements. With an OE-comparable design, it can be fitted directly into a compatible vehicle. This, however, does not come with holes for a spoiler nor does it have its own latch. The product is backed by a 1-year, unlimited mileage warranty from Replacement.