Tips to Keep the Premium Condition of Your Ford Billet Grille
If you want to level up the look of your ride, then a Ford billet grille is a great investment. It is made from durable materials, allowing it to serve as a protective cover against road elements. This component also promotes proper airflow to the engine compartment. However, given its location, the billet grille is very susceptible to damage. So if you want to extend the service life of your Ford billet grille, here are three useful tips that you can follow:
- Use the appropriate cleaning tools and materials to keep the billet grille dirt-free.
Since the billet grille is constantly exposed to the elements, different road particles can get stuck on it, which can possibly lead to damage. So, it is important that you clean it regularly using the appropriate cleaning materials. You should also prepare it for polishing, if needed. You can use a mild car soap and clean water to wash away the dirt and other particles that have settled on the billet grille. A degreaser can also help break down oily substances and other water-insoluble substances from the billet grille. The washing process can be finished off using a smooth rag or microfiber towel to effectively wipe excessive moisture and particles from the billet grille.
- Buff your billet grille with sandpaper to remove tough marks and scratches.
If your billet grille is already dull and has acquired lots of scratches, then it is time to buff it with sandpaper. Buffing can also get rid of surface contaminants that cannot be removed through the washing process. Also, this will help to provide the billet grille with a smooth surface. You can start with 320-grit sandpaper, which is enough to prepare the surface, then. a 400 up to 600-grit sandpaper afterwards to conceal the scratches and leave your billet grille with a smooth surface. And finally, a 1000-grit sandpaper must be used to prepare your billet grille for polishing. This may leave tiny scratches, but you must not worry because the polishing process can restore the look of your billet grille.
- Apply a polishing compound to restore the look of the billet grille.
The buffing process can leave the surface of your billet grille smooth but dull. So you have to apply a polishing compound to restore its luster. Make sure though that the polishing compound you will be using is mild and safe for billet aluminum to prevent abrasions. In addition, you can use a buffing pad during the process. This is a convenient way to spread the polish evenly and to prevent swirl marks from occurring. You can also use a smooth microfiber towel to wipe away the remaining polish afterwards without having to worry about scratching the surface.
- Drive carefully to avoid getting involved in a frontal crash.
Being involved in a head-on collision, even minor ones, can badly ruin the front-end components of your ride. If you don't want that to happen, you'd better be careful when driving especially on highly trafficked roads. Most of the time, the bumper and the grille get scratched due to parking mishaps, so also be careful enough when parking your ride or when pulling out of your parking slot.